All of lore.kernel.org
 help / color / mirror / Atom feed
From: Avri Altman <avri.altman@wdc.com>
To: "James E . J . Bottomley" <jejb@linux.vnet.ibm.com>,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: gregkh@linuxfoundation.org, Bart Van Assche <bvanassche@acm.org>,
	yongmyung lee <ymhungry.lee@samsung.com>,
	Daejun Park <daejun7.park@samsung.com>,
	alim.akhtar@samsung.com, asutoshd@codeaurora.org,
	Zang Leigang <zangleigang@hisilicon.com>,
	Avi Shchislowski <avi.shchislowski@wdc.com>,
	Bean Huo <beanhuo@micron.com>,
	cang@codeaurora.org, stanley.chu@mediatek.com,
	Avri Altman <avri.altman@wdc.com>
Subject: [PATCH v4 6/9] scsi: ufshpb: Add hpb dev reset response
Date: Fri, 26 Feb 2021 10:32:57 +0200	[thread overview]
Message-ID: <20210226083300.30934-7-avri.altman@wdc.com> (raw)
In-Reply-To: <20210226083300.30934-1-avri.altman@wdc.com>

The spec does not define what is the host's recommended response when
the device send hpb dev reset response (oper 0x2).

We will update all active hpb regions: mark them and do that on the next
read.

Signed-off-by: Avri Altman <avri.altman@wdc.com>
---
 drivers/scsi/ufs/ufshpb.c | 53 ++++++++++++++++++++++++++++++++++++---
 drivers/scsi/ufs/ufshpb.h |  3 +++
 2 files changed, 53 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
index cf704b82e72a..f33aa28e0a0a 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/scsi/ufs/ufshpb.c
@@ -642,7 +642,8 @@ int ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 		if (rgn->reads == ACTIVATION_THRESHOLD)
 			activate = true;
 		spin_unlock_irqrestore(&rgn->rgn_lock, flags);
-		if (activate) {
+		if (activate ||
+		    test_and_clear_bit(RGN_FLAG_UPDATE, &rgn->rgn_flags)) {
 			spin_lock_irqsave(&hpb->rsp_list_lock, flags);
 			ufshpb_update_active_info(hpb, rgn_idx, srgn_idx);
 			hpb->stats.rb_active_cnt++;
@@ -1481,6 +1482,24 @@ void ufshpb_rsp_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 	case HPB_RSP_DEV_RESET:
 		dev_warn(&hpb->sdev_ufs_lu->sdev_dev,
 			 "UFS device lost HPB information during PM.\n");
+
+		if (hpb->is_hcm) {
+			struct scsi_device *sdev;
+
+			__shost_for_each_device(sdev, hba->host) {
+				struct ufshpb_lu *h = sdev->hostdata;
+
+				if (!h)
+					continue;
+
+				if (test_and_set_bit(RESET_PENDING,
+						     &hpb->work_data_bits))
+					continue;
+
+				schedule_work(&hpb->ufshpb_lun_reset_work);
+			}
+		}
+
 		break;
 	default:
 		dev_notice(&hpb->sdev_ufs_lu->sdev_dev,
@@ -1595,6 +1614,27 @@ static void ufshpb_run_inactive_region_list(struct ufshpb_lu *hpb)
 	spin_unlock_irqrestore(&hpb->rsp_list_lock, flags);
 }
 
+static void ufshpb_reset_work_handler(struct work_struct *work)
+{
+	struct ufshpb_lu *hpb;
+	struct victim_select_info *lru_info;
+	struct ufshpb_region *rgn;
+	unsigned long flags;
+
+	hpb = container_of(work, struct ufshpb_lu, ufshpb_lun_reset_work);
+
+	lru_info = &hpb->lru_info;
+
+	spin_lock_irqsave(&hpb->rgn_state_lock, flags);
+
+	list_for_each_entry(rgn, &lru_info->lh_lru_rgn, list_lru_rgn)
+		set_bit(RGN_FLAG_UPDATE, &rgn->rgn_flags);
+
+	spin_unlock_irqrestore(&hpb->rgn_state_lock, flags);
+
+	clear_bit(RESET_PENDING, &hpb->work_data_bits);
+}
+
 static void ufshpb_normalization_work_handler(struct work_struct *work)
 {
 	struct ufshpb_lu *hpb;
@@ -1804,6 +1844,8 @@ static int ufshpb_alloc_region_tbl(struct ufs_hba *hba, struct ufshpb_lu *hpb)
 		} else {
 			rgn->rgn_state = HPB_RGN_INACTIVE;
 		}
+
+		rgn->rgn_flags = 0;
 	}
 
 	return 0;
@@ -2018,9 +2060,12 @@ static int ufshpb_lu_hpb_init(struct ufs_hba *hba, struct ufshpb_lu *hpb)
 	INIT_LIST_HEAD(&hpb->list_hpb_lu);
 
 	INIT_WORK(&hpb->map_work, ufshpb_map_work_handler);
-	if (hpb->is_hcm)
+	if (hpb->is_hcm) {
 		INIT_WORK(&hpb->ufshpb_normalization_work,
 			  ufshpb_normalization_work_handler);
+		INIT_WORK(&hpb->ufshpb_lun_reset_work,
+			  ufshpb_reset_work_handler);
+	}
 
 	hpb->map_req_cache = kmem_cache_create("ufshpb_req_cache",
 			  sizeof(struct ufshpb_req), 0, 0, NULL);
@@ -2120,8 +2165,10 @@ static void ufshpb_discard_rsp_lists(struct ufshpb_lu *hpb)
 
 static void ufshpb_cancel_jobs(struct ufshpb_lu *hpb)
 {
-	if (hpb->is_hcm)
+	if (hpb->is_hcm) {
+		cancel_work_sync(&hpb->ufshpb_lun_reset_work);
 		cancel_work_sync(&hpb->ufshpb_normalization_work);
+	}
 	cancel_work_sync(&hpb->map_work);
 }
 
diff --git a/drivers/scsi/ufs/ufshpb.h b/drivers/scsi/ufs/ufshpb.h
index b78ccb67b765..60bf5564397b 100644
--- a/drivers/scsi/ufs/ufshpb.h
+++ b/drivers/scsi/ufs/ufshpb.h
@@ -121,6 +121,7 @@ struct ufshpb_region {
 	struct list_head list_lru_rgn;
 	unsigned long rgn_flags;
 #define RGN_FLAG_DIRTY 0
+#define RGN_FLAG_UPDATE 1
 
 	/* region reads - for host mode */
 	spinlock_t rgn_lock;
@@ -217,8 +218,10 @@ struct ufshpb_lu {
 	/* for selecting victim */
 	struct victim_select_info lru_info;
 	struct work_struct ufshpb_normalization_work;
+	struct work_struct ufshpb_lun_reset_work;
 	unsigned long work_data_bits;
 #define WORK_PENDING 0
+#define RESET_PENDING 1
 
 	/* pinned region information */
 	u32 lu_pinned_start;
-- 
2.25.1


  parent reply	other threads:[~2021-02-26  8:40 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-26  8:32 [PATCH v4 0/9] Add Host control mode to HPB Avri Altman
2021-02-26  8:32 ` [PATCH v4 1/9] scsi: ufshpb: Cache HPB Control mode on init Avri Altman
2021-02-26  8:32 ` [PATCH v4 2/9] scsi: ufshpb: Add host control mode support to rsp_upiu Avri Altman
2021-02-26  8:32 ` [PATCH v4 3/9] scsi: ufshpb: Add region's reads counter Avri Altman
2021-02-26  8:32 ` [PATCH v4 4/9] scsi: ufshpb: Make eviction depends on region's reads Avri Altman
2021-02-26  8:32 ` [PATCH v4 5/9] scsi: ufshpb: Region inactivation in host mode Avri Altman
2021-02-26  8:32 ` Avri Altman [this message]
2021-02-26  8:32 ` [PATCH v4 7/9] scsi: ufshpb: Add "Cold" regions timer Avri Altman
2021-02-26  8:32 ` [PATCH v4 8/9] scsi: ufshpb: Add support for host control mode Avri Altman
2021-02-26  8:33 ` [PATCH v4 9/9] scsi: ufshpb: Make host mode parameters configurable Avri Altman
     [not found] ` <CGME20210226083447epcas2p2f68ef00a935d25bd2cfc930d1ef1f4f7@epcms2p3>
2021-03-02  8:20   ` [PATCH v4 6/9] scsi: ufshpb: Add hpb dev reset response Daejun Park
2021-03-02  8:51     ` Avri Altman
2021-03-02  9:32     ` Avri Altman
     [not found] ` <CGME20210226083459epcas2p1862e3e2c18208074336cc9faf14a7139@epcms2p7>
2021-03-02  8:26   ` [PATCH v4 7/9] scsi: ufshpb: Add "Cold" regions timer Daejun Park
2021-03-02  8:45     ` Avri Altman
     [not found]     ` <CGME20210226083459epcas2p1862e3e2c18208074336cc9faf14a7139@epcms2p4>
2021-03-02  9:04       ` Daejun Park
     [not found] ` <CGME20210226083422epcas2p2d39acff666e2cb9ed97bc2d5c7a8df6f@epcms2p5>
2021-03-02  8:31   ` [PATCH v4 3/9] scsi: ufshpb: Add region's reads counter Daejun Park
2021-03-02  9:19     ` Avri Altman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210226083300.30934-7-avri.altman@wdc.com \
    --to=avri.altman@wdc.com \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avi.shchislowski@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=daejun7.park@samsung.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=stanley.chu@mediatek.com \
    --cc=ymhungry.lee@samsung.com \
    --cc=zangleigang@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.