From: "Lad Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: cip-dev@lists.cip-project.org,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>,
Pavel Machek <pavel@denx.de>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Subject: [cip-dev] [PATCH 4.19.y-cip 00/40] Renesas RZ/G2{E,H,M,N} add VIN, CSI2 support
Date: Tue, 9 Mar 2021 16:36:16 +0000 [thread overview]
Message-ID: <20210309163656.20944-1-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 5405 bytes --]
Hi All,
This patch series does the following:
* Drops unneeded regulator setup for OV5645 sensor
* Adds driver for IMX219 sensor
* Updates v4l2-async to accept endpoints for fwnode matching
* Various fixes for R-Car VIN driver
* Support to capture RAW format to VIN driver
* Support for RZ/G2{H,M,N,E} SoC's in VIN/CSI2 driver
* DTS changes for HiHope RZ/G2{H,M,N} and SI Linux RZ/G2E to
enable VIN, CSI2 modules and OV5645, IMX219 sensors.
Cheers,
Prabhakar
Andrey Konovalov (1):
media: dt-bindings: media: i2c: Add IMX219 CMOS sensor binding
Biju Das (10):
media: dt-bindings: media: rcar_vin: Add r8a774a1 support
media: rcar-vin: Enable support for r8a774a1
media: dt-bindings: media: rcar-csi2: Add r8a774a1 support
media: rcar-csi2: Enable support for r8a774a1
arm64: dts: renesas: r8a774a1: Add VIN and CSI-2 nodes
media: dt-bindings: rcar-vin: Add R8A774B1 support
media: rcar-vin: Enable support for R8A774B1
media: dt-bindings: rcar-csi2: Add R8A774B1 support
media: rcar-csi2: Enable support for R8A774B1
arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support
Dafna Hirschfeld (1):
media: i2c: imx219: Fix a bug in imx219_enum_frame_size
Dave Stevenson (1):
media: i2c: Add driver for Sony IMX219 sensor
Fabio Estevam (1):
media: ov5645: Remove unneeded regulator_set_voltage()
Hans Verkuil (2):
media: i2c: imx219: Selection compliance fixes
media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size
Jacopo Mondi (1):
media: i2c: imx219: Implement get_selection
Lad Prabhakar (16):
media: rcar-vin: Invalidate pipeline if conversion is not possible on
input formats
media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format
media: i2c: imx219: Fix power sequence
media: i2c: imx219: Add support for RAW8 bit bayer format
media: i2c: imx219: Add support for cropped 640x480 resolution
arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION
MIPI Adapter V2.1
media: dt-bindings: media: renesas,vin: Add R8A774E1 support
media: rcar-vin: Enable support for R8A774E1
media: dt-bindings: media: renesas,csi2: Add R8A774E1 support
media: rcar-csi2: Enable support for R8A774E1
arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro
for each sensor
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2H
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to
HiHope RZ/G2N
Laurent Pinchart (4):
media: device property: Add a function to test is a fwnode is a graph
endpoint
media: v4l2-async: Accept endpoints and devices for fwnode matching
media: v4l2-async: Pass notifier pointer to match functions
media: v4l2-async: Log message in case of heterogeneous fwnode match
Niklas Söderlund (2):
media: rcar-vin: fix wrong return value in rvin_set_channel_routing()
media: rcar-csi2: Update V3M and E3 start procedure
Sakari Ailus (1):
media: v4l: ctrl: Provide unlocked variant of v4l2_ctrl_grab
.../devicetree/bindings/media/i2c/imx219.yaml | 114 ++
.../devicetree/bindings/media/rcar_vin.txt | 3 +
.../bindings/media/renesas,rcar-csi2.txt | 3 +
MAINTAINERS | 8 +
arch/arm64/boot/dts/renesas/Makefile | 10 +-
.../aistarvision-mipi-adapter-2.1.dtsi | 96 +
...rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi | 109 ++
.../r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts | 29 +
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 367 ++++
.../r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 366 ++++
.../dts/renesas/r8a774c0-ek874-mipi-2.1.dts | 73 +
.../r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts | 16 +
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 334 ++++
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx219.c | 1582 +++++++++++++++++
drivers/media/i2c/ov5645.c | 28 -
drivers/media/platform/rcar-vin/rcar-core.c | 49 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 23 +-
drivers/media/platform/rcar-vin/rcar-dma.c | 17 +-
drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 +
drivers/media/v4l2-core/v4l2-async.c | 83 +-
drivers/media/v4l2-core/v4l2-ctrls.c | 8 +-
include/linux/property.h | 5 +
include/media/v4l2-ctrls.h | 26 +-
26 files changed, 3330 insertions(+), 51 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.yaml
create mode 100644 arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
create mode 100644 drivers/media/i2c/imx219.c
--
2.17.1
[-- Attachment #2: Type: text/plain, Size: 428 bytes --]
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#6221): https://lists.cip-project.org/g/cip-dev/message/6221
Mute This Topic: https://lists.cip-project.org/mt/81205345/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/4520388/727948398/xyzzy [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-
next reply other threads:[~2021-03-09 16:37 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-09 16:36 Lad Prabhakar [this message]
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 01/40] media: ov5645: Remove unneeded regulator_set_voltage() Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 02/40] media: device property: Add a function to test is a fwnode is a graph endpoint Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 03/40] media: v4l2-async: Accept endpoints and devices for fwnode matching Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 04/40] media: v4l2-async: Pass notifier pointer to match functions Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 05/40] media: v4l2-async: Log message in case of heterogeneous fwnode match Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 06/40] media: v4l: ctrl: Provide unlocked variant of v4l2_ctrl_grab Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 07/40] media: rcar-vin: fix wrong return value in rvin_set_channel_routing() Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 08/40] media: rcar-csi2: Update V3M and E3 start procedure Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 09/40] media: rcar-vin: Invalidate pipeline if conversion is not possible on input formats Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 10/40] media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 11/40] media: rcar-csi2: " Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 12/40] media: dt-bindings: media: i2c: Add IMX219 CMOS sensor binding Lad Prabhakar
2021-03-09 18:52 ` Pavel Machek
2021-03-10 8:48 ` Lad Prabhakar
2021-03-10 9:38 ` Pavel Machek
2021-03-10 10:24 ` Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 13/40] media: i2c: Add driver for Sony IMX219 sensor Lad Prabhakar
2021-03-09 20:36 ` Pavel Machek
2021-03-10 9:36 ` Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 14/40] media: i2c: imx219: Fix power sequence Lad Prabhakar
2021-03-09 19:42 ` Pavel Machek
2021-03-10 8:49 ` Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 15/40] media: i2c: imx219: Add support for RAW8 bit bayer format Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 16/40] media: i2c: imx219: Add support for cropped 640x480 resolution Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 17/40] media: i2c: imx219: Implement get_selection Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 18/40] media: i2c: imx219: Fix a bug in imx219_enum_frame_size Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 19/40] media: i2c: imx219: Selection compliance fixes Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 20/40] media: i2c: imx219: take lock in imx219_enum_mbus_code/frame_size Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 21/40] arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI Adapter V2.1 Lad Prabhakar
2021-03-09 20:39 ` Pavel Machek
2021-03-10 9:37 ` Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 22/40] media: dt-bindings: media: rcar_vin: Add r8a774a1 support Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 23/40] media: rcar-vin: Enable support for r8a774a1 Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 24/40] media: dt-bindings: media: rcar-csi2: Add r8a774a1 support Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 25/40] media: rcar-csi2: Enable support for r8a774a1 Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 26/40] arm64: dts: renesas: r8a774a1: Add VIN and CSI-2 nodes Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 27/40] media: dt-bindings: rcar-vin: Add R8A774B1 support Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 28/40] media: rcar-vin: Enable support for R8A774B1 Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 29/40] media: dt-bindings: rcar-csi2: Add R8A774B1 support Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 30/40] media: rcar-csi2: Enable support for R8A774B1 Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 31/40] arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 32/40] media: dt-bindings: media: renesas,vin: Add R8A774E1 support Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 33/40] media: rcar-vin: Enable support for R8A774E1 Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 34/40] media: dt-bindings: media: renesas,csi2: Add R8A774E1 support Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 35/40] media: rcar-csi2: Enable support for R8A774E1 Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 36/40] arm64: dts: renesas: r8a774e1: Add VIN and CSI-2 nodes Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 37/40] arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 38/40] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 39/40] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M Lad Prabhakar
2021-03-09 16:36 ` [cip-dev] [PATCH 4.19.y-cip 40/40] arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N Lad Prabhakar
2021-03-09 20:48 ` [cip-dev] [PATCH 4.19.y-cip 00/40] Renesas RZ/G2{E,H,M,N} add VIN, CSI2 support Pavel Machek
2021-03-09 23:13 ` Pavel Machek
2021-03-10 8:07 ` Nobuhiro Iwamatsu
2021-03-10 9:41 ` Lad Prabhakar
2021-03-10 10:58 ` Chris Paterson
[not found] ` <166AF609ACF1E617.19014@lists.cip-project.org>
2021-03-22 22:11 ` Chris Paterson
2021-03-23 7:31 ` Nobuhiro Iwamatsu
2021-03-23 7:50 ` Chris Paterson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210309163656.20944-1-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=pavel@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.