From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Scott Wood <oss@buserror.net>, Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v2 04/11] powerpc/64e/interrupt: use new interrupt return
Date: Tue, 16 Mar 2021 20:41:58 +1000 [thread overview]
Message-ID: <20210316104206.407354-5-npiggin@gmail.com> (raw)
In-Reply-To: <20210316104206.407354-1-npiggin@gmail.com>
Update the new C and asm interrupt return code to account for 64e
specifics, switch over to use it.
The now-unused old ret_from_except code, that was moved to 64e after the
64s conversion, is removed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/include/asm/asm-prototypes.h | 2 -
arch/powerpc/include/asm/ppc_asm.h | 20 --
arch/powerpc/kernel/asm-offsets.c | 10 -
arch/powerpc/kernel/exceptions-64e.S | 321 ++--------------------
arch/powerpc/kernel/irq.c | 76 -----
5 files changed, 25 insertions(+), 404 deletions(-)
diff --git a/arch/powerpc/include/asm/asm-prototypes.h b/arch/powerpc/include/asm/asm-prototypes.h
index 939f3c94c8f3..1c7b75834e04 100644
--- a/arch/powerpc/include/asm/asm-prototypes.h
+++ b/arch/powerpc/include/asm/asm-prototypes.h
@@ -77,8 +77,6 @@ notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs, unsign
long ppc_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low,
u32 len_high, u32 len_low);
long sys_switch_endian(void);
-notrace unsigned int __check_irq_replay(void);
-void notrace restore_interrupts(void);
/* prom_init (OpenFirmware) */
unsigned long __init prom_init(unsigned long r3, unsigned long r4,
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index 8998122fc7e2..d6739d700f0a 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -15,26 +15,6 @@
#define SZL (BITS_PER_LONG/8)
-/*
- * Stuff for accurate CPU time accounting.
- * These macros handle transitions between user and system state
- * in exception entry and exit and accumulate time to the
- * user_time and system_time fields in the paca.
- */
-
-#ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
-#define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb)
-#else
-#define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb) \
- MFTB(ra); /* get timebase */ \
- PPC_LL rb, ACCOUNT_STARTTIME(ptr); \
- PPC_STL ra, ACCOUNT_STARTTIME_USER(ptr); \
- subf rb,rb,ra; /* subtract start value */ \
- PPC_LL ra, ACCOUNT_SYSTEM_TIME(ptr); \
- add ra,ra,rb; /* add on to system time */ \
- PPC_STL ra, ACCOUNT_SYSTEM_TIME(ptr)
-#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
-
/*
* Macros for storing registers into and loading registers from
* exception frames.
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 85ba2b0bc8d8..c880ad18b851 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -282,21 +282,11 @@ int main(void)
OFFSET(PACAHWCPUID, paca_struct, hw_cpu_id);
OFFSET(PACAKEXECSTATE, paca_struct, kexec_state);
OFFSET(PACA_DSCR_DEFAULT, paca_struct, dscr_default);
- OFFSET(ACCOUNT_STARTTIME, paca_struct, accounting.starttime);
- OFFSET(ACCOUNT_STARTTIME_USER, paca_struct, accounting.starttime_user);
- OFFSET(ACCOUNT_USER_TIME, paca_struct, accounting.utime);
- OFFSET(ACCOUNT_SYSTEM_TIME, paca_struct, accounting.stime);
#ifdef CONFIG_PPC_BOOK3E
OFFSET(PACA_TRAP_SAVE, paca_struct, trap_save);
#endif
OFFSET(PACA_SPRG_VDSO, paca_struct, sprg_vdso);
#else /* CONFIG_PPC64 */
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
- OFFSET(ACCOUNT_STARTTIME, thread_info, accounting.starttime);
- OFFSET(ACCOUNT_STARTTIME_USER, thread_info, accounting.starttime_user);
- OFFSET(ACCOUNT_USER_TIME, thread_info, accounting.utime);
- OFFSET(ACCOUNT_SYSTEM_TIME, thread_info, accounting.stime);
-#endif
#endif /* CONFIG_PPC64 */
/* RTAS */
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index a7d9ce9f7fdb..7a2e7be33092 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -139,7 +139,8 @@ ret_from_level_except:
ld r3,_MSR(r1)
andi. r3,r3,MSR_PR
beq 1f
- b ret_from_except
+ REST_NVGPRS(r1)
+ b interrupt_return
1:
LOAD_REG_ADDR(r11,extlb_level_exc)
@@ -208,7 +209,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
/*
* Restore PACAIRQHAPPENED rather than setting it based on
* the return MSR[EE], since we could have interrupted
- * __check_irq_replay() or other inconsistent transitory
+ * interrupt replay or other inconsistent transitory
* states that must remain that way.
*/
SPECIAL_EXC_LOAD(r10,IRQHAPPENED)
@@ -511,7 +512,7 @@ exc_##n##_bad_stack: \
CHECK_NAPPING(); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
bl hdlr; \
- b ret_from_except_lite;
+ b interrupt_return
/* This value is used to mark exception frames on the stack. */
.section ".toc","aw"
@@ -623,7 +624,8 @@ __end_interrupts:
addi r3,r1,STACK_FRAME_OVERHEAD
ld r14,PACA_EXGEN+EX_R14(r13)
bl program_check_exception
- b ret_from_except
+ REST_NVGPRS(r1)
+ b interrupt_return
/* Floating Point Unavailable Interrupt */
START_EXCEPTION(fp_unavailable);
@@ -635,11 +637,11 @@ __end_interrupts:
andi. r0,r12,MSR_PR;
beq- 1f
bl load_up_fpu
- b fast_exception_return
+ b fast_interrupt_return
1: INTS_DISABLE
addi r3,r1,STACK_FRAME_OVERHEAD
bl kernel_fp_unavailable_exception
- b ret_from_except
+ b interrupt_return
/* Altivec Unavailable Interrupt */
START_EXCEPTION(altivec_unavailable);
@@ -653,14 +655,14 @@ BEGIN_FTR_SECTION
andi. r0,r12,MSR_PR;
beq- 1f
bl load_up_altivec
- b fast_exception_return
+ b fast_interrupt_return
1:
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
INTS_DISABLE
addi r3,r1,STACK_FRAME_OVERHEAD
bl altivec_unavailable_exception
- b ret_from_except
+ b interrupt_return
/* AltiVec Assist */
START_EXCEPTION(altivec_assist);
@@ -674,10 +676,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
BEGIN_FTR_SECTION
bl altivec_assist_exception
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ REST_NVGPRS(r1)
#else
bl unknown_exception
#endif
- b ret_from_except
+ b interrupt_return
/* Decrementer Interrupt */
@@ -719,7 +722,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
INTS_DISABLE
addi r3,r1,STACK_FRAME_OVERHEAD
bl unknown_exception
- b ret_from_except
+ b interrupt_return
/* Debug exception as a critical interrupt*/
START_EXCEPTION(debug_crit);
@@ -786,7 +789,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
ld r14,PACA_EXCRIT+EX_R14(r13)
ld r15,PACA_EXCRIT+EX_R15(r13)
bl DebugException
- b ret_from_except
+ REST_NVGPRS(r1)
+ b interrupt_return
kernel_dbg_exc:
b . /* NYI */
@@ -857,7 +861,8 @@ kernel_dbg_exc:
ld r14,PACA_EXDBG+EX_R14(r13)
ld r15,PACA_EXDBG+EX_R15(r13)
bl DebugException
- b ret_from_except
+ REST_NVGPRS(r1)
+ b interrupt_return
START_EXCEPTION(perfmon);
NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR,
@@ -867,7 +872,7 @@ kernel_dbg_exc:
CHECK_NAPPING()
addi r3,r1,STACK_FRAME_OVERHEAD
bl performance_monitor_exception
- b ret_from_except_lite
+ b interrupt_return
/* Doorbell interrupt */
MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL,
@@ -895,7 +900,7 @@ kernel_dbg_exc:
addi r3,r1,STACK_FRAME_OVERHEAD
INTS_RESTORE_HARD
bl unknown_exception
- b ret_from_except
+ b interrupt_return
/* Guest Doorbell critical Interrupt */
START_EXCEPTION(guest_doorbell_crit);
@@ -916,7 +921,7 @@ kernel_dbg_exc:
addi r3,r1,STACK_FRAME_OVERHEAD
INTS_RESTORE_HARD
bl unknown_exception
- b ret_from_except
+ b interrupt_return
/* Embedded Hypervisor priviledged */
START_EXCEPTION(ehpriv);
@@ -926,7 +931,7 @@ kernel_dbg_exc:
addi r3,r1,STACK_FRAME_OVERHEAD
INTS_RESTORE_HARD
bl unknown_exception
- b ret_from_except
+ b interrupt_return
/* LRAT Error interrupt */
START_EXCEPTION(lrat_error);
@@ -936,7 +941,7 @@ kernel_dbg_exc:
addi r3,r1,STACK_FRAME_OVERHEAD
INTS_RESTORE_HARD
bl unknown_exception
- b ret_from_except
+ b interrupt_return
/*
* An interrupt came in while soft-disabled; We mark paca->irq_happened
@@ -998,11 +1003,11 @@ storage_fault_common:
bl do_page_fault
cmpdi r3,0
bne- 1f
- b ret_from_except_lite
+ b interrupt_return
mr r4,r3
addi r3,r1,STACK_FRAME_OVERHEAD
bl __bad_page_fault
- b ret_from_except
+ b interrupt_return
/*
* Alignment exception doesn't fit entirely in the 0x100 bytes so it
@@ -1016,284 +1021,8 @@ alignment_more:
ld r15,PACA_EXGEN+EX_R15(r13)
INTS_RESTORE_HARD
bl alignment_exception
- b ret_from_except
-
- .align 7
-_GLOBAL(ret_from_except)
REST_NVGPRS(r1)
-
-_GLOBAL(ret_from_except_lite)
- /*
- * Disable interrupts so that current_thread_info()->flags
- * can't change between when we test it and when we return
- * from the interrupt.
- */
- wrteei 0
-
- ld r9, PACA_THREAD_INFO(r13)
- ld r3,_MSR(r1)
- ld r10,PACACURRENT(r13)
- ld r4,TI_FLAGS(r9)
- andi. r3,r3,MSR_PR
- beq resume_kernel
- lwz r3,(THREAD+THREAD_DBCR0)(r10)
-
- /* Check current_thread_info()->flags */
- andi. r0,r4,_TIF_USER_WORK_MASK
- bne 1f
- /*
- * Check to see if the dbcr0 register is set up to debug.
- * Use the internal debug mode bit to do this.
- */
- andis. r0,r3,DBCR0_IDM@h
- beq restore
- mfmsr r0
- rlwinm r0,r0,0,~MSR_DE /* Clear MSR.DE */
- mtmsr r0
- mtspr SPRN_DBCR0,r3
- li r10, -1
- mtspr SPRN_DBSR,r10
- b restore
-1: andi. r0,r4,_TIF_NEED_RESCHED
- beq 2f
- bl restore_interrupts
- SCHEDULE_USER
- b ret_from_except_lite
-2:
- /*
- * Use a non volatile GPR to save and restore our thread_info flags
- * across the call to restore_interrupts.
- */
- mr r30,r4
- bl restore_interrupts
- mr r4,r30
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl do_notify_resume
- b ret_from_except
-
-resume_kernel:
- /* check current_thread_info, _TIF_EMULATE_STACK_STORE */
- andis. r8,r4,_TIF_EMULATE_STACK_STORE@h
- beq+ 1f
-
- addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */
-
- ld r3,GPR1(r1)
- subi r3,r3,INT_FRAME_SIZE /* dst: Allocate a trampoline exception frame */
- mr r4,r1 /* src: current exception frame */
- mr r1,r3 /* Reroute the trampoline frame to r1 */
-
- /* Copy from the original to the trampoline. */
- li r5,INT_FRAME_SIZE/8 /* size: INT_FRAME_SIZE */
- li r6,0 /* start offset: 0 */
- mtctr r5
-2: ldx r0,r6,r4
- stdx r0,r6,r3
- addi r6,r6,8
- bdnz 2b
-
- /* Do real store operation to complete stdu */
- ld r5,GPR1(r1)
- std r8,0(r5)
-
- /* Clear _TIF_EMULATE_STACK_STORE flag */
- lis r11,_TIF_EMULATE_STACK_STORE@h
- addi r5,r9,TI_FLAGS
-0: ldarx r4,0,r5
- andc r4,r4,r11
- stdcx. r4,0,r5
- bne- 0b
-1:
-
-#ifdef CONFIG_PREEMPT
- /* Check if we need to preempt */
- andi. r0,r4,_TIF_NEED_RESCHED
- beq+ restore
- /* Check that preempt_count() == 0 and interrupts are enabled */
- lwz r8,TI_PREEMPT(r9)
- cmpwi cr0,r8,0
- bne restore
- ld r0,SOFTE(r1)
- andi. r0,r0,IRQS_DISABLED
- bne restore
-
- /*
- * Here we are preempting the current task. We want to make
- * sure we are soft-disabled first and reconcile irq state.
- */
- RECONCILE_IRQ_STATE(r3,r4)
- bl preempt_schedule_irq
-
- /*
- * arch_local_irq_restore() from preempt_schedule_irq above may
- * enable hard interrupt but we really should disable interrupts
- * when we return from the interrupt, and so that we don't get
- * interrupted after loading SRR0/1.
- */
- wrteei 0
-#endif /* CONFIG_PREEMPT */
-
-restore:
- /*
- * This is the main kernel exit path. First we check if we
- * are about to re-enable interrupts
- */
- ld r5,SOFTE(r1)
- lbz r6,PACAIRQSOFTMASK(r13)
- andi. r5,r5,IRQS_DISABLED
- bne .Lrestore_irq_off
-
- /* We are enabling, were we already enabled ? Yes, just return */
- andi. r6,r6,IRQS_DISABLED
- beq cr0,fast_exception_return
-
- /*
- * We are about to soft-enable interrupts (we are hard disabled
- * at this point). We check if there's anything that needs to
- * be replayed first.
- */
- lbz r0,PACAIRQHAPPENED(r13)
- cmpwi cr0,r0,0
- bne- .Lrestore_check_irq_replay
-
- /*
- * Get here when nothing happened while soft-disabled, just
- * soft-enable and move-on. We will hard-enable as a side
- * effect of rfi
- */
-.Lrestore_no_replay:
- TRACE_ENABLE_INTS
- li r0,IRQS_ENABLED
- stb r0,PACAIRQSOFTMASK(r13);
-
-/* This is the return from load_up_fpu fast path which could do with
- * less GPR restores in fact, but for now we have a single return path
- */
-fast_exception_return:
- wrteei 0
-1: mr r0,r13
- ld r10,_MSR(r1)
- REST_4GPRS(2, r1)
- andi. r6,r10,MSR_PR
- REST_2GPRS(6, r1)
- beq 1f
- ACCOUNT_CPU_USER_EXIT(r13, r10, r11)
- ld r0,GPR13(r1)
-
-1: stdcx. r0,0,r1 /* to clear the reservation */
-
- ld r8,_CCR(r1)
- ld r9,_LINK(r1)
- ld r10,_CTR(r1)
- ld r11,_XER(r1)
- mtcr r8
- mtlr r9
- mtctr r10
- mtxer r11
- REST_2GPRS(8, r1)
- ld r10,GPR10(r1)
- ld r11,GPR11(r1)
- ld r12,GPR12(r1)
- mtspr SPRN_SPRG_GEN_SCRATCH,r0
-
- std r10,PACA_EXGEN+EX_R10(r13);
- std r11,PACA_EXGEN+EX_R11(r13);
- ld r10,_NIP(r1)
- ld r11,_MSR(r1)
- ld r0,GPR0(r1)
- ld r1,GPR1(r1)
- mtspr SPRN_SRR0,r10
- mtspr SPRN_SRR1,r11
- ld r10,PACA_EXGEN+EX_R10(r13)
- ld r11,PACA_EXGEN+EX_R11(r13)
- mfspr r13,SPRN_SPRG_GEN_SCRATCH
- rfi
-
- /*
- * We are returning to a context with interrupts soft disabled.
- *
- * However, we may also about to hard enable, so we need to
- * make sure that in this case, we also clear PACA_IRQ_HARD_DIS
- * or that bit can get out of sync and bad things will happen
- */
-.Lrestore_irq_off:
- ld r3,_MSR(r1)
- lbz r7,PACAIRQHAPPENED(r13)
- andi. r0,r3,MSR_EE
- beq 1f
- rlwinm r7,r7,0,~PACA_IRQ_HARD_DIS
- stb r7,PACAIRQHAPPENED(r13)
-1:
-#if defined(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG) && defined(CONFIG_BUG)
- /* The interrupt should not have soft enabled. */
- lbz r7,PACAIRQSOFTMASK(r13)
-1: tdeqi r7,IRQS_ENABLED
- EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
-#endif
- b fast_exception_return
-
- /*
- * Something did happen, check if a re-emit is needed
- * (this also clears paca->irq_happened)
- */
-.Lrestore_check_irq_replay:
- /* XXX: We could implement a fast path here where we check
- * for irq_happened being just 0x01, in which case we can
- * clear it and return. That means that we would potentially
- * miss a decrementer having wrapped all the way around.
- *
- * Still, this might be useful for things like hash_page
- */
- bl __check_irq_replay
- cmpwi cr0,r3,0
- beq .Lrestore_no_replay
-
- /*
- * We need to re-emit an interrupt. We do so by re-using our
- * existing exception frame. We first change the trap value,
- * but we need to ensure we preserve the low nibble of it
- */
- ld r4,_TRAP(r1)
- clrldi r4,r4,60
- or r4,r4,r3
- std r4,_TRAP(r1)
-
- /*
- * PACA_IRQ_HARD_DIS won't always be set here, so set it now
- * to reconcile the IRQ state. Tracing is already accounted for.
- */
- lbz r4,PACAIRQHAPPENED(r13)
- ori r4,r4,PACA_IRQ_HARD_DIS
- stb r4,PACAIRQHAPPENED(r13)
-
- /*
- * Then find the right handler and call it. Interrupts are
- * still soft-disabled and we keep them that way.
- */
- cmpwi cr0,r3,0x500
- bne 1f
- addi r3,r1,STACK_FRAME_OVERHEAD;
- bl do_IRQ
- b ret_from_except
-1: cmpwi cr0,r3,0x900
- bne 1f
- addi r3,r1,STACK_FRAME_OVERHEAD;
- bl timer_interrupt
- b ret_from_except
-#ifdef CONFIG_PPC_DOORBELL
-1:
- cmpwi cr0,r3,0x280
- bne 1f
- addi r3,r1,STACK_FRAME_OVERHEAD;
- bl doorbell_exception
-#endif /* CONFIG_PPC_DOORBELL */
-1: b ret_from_except /* What else to do here ? */
-
-_ASM_NOKPROBE_SYMBOL(ret_from_except);
-_ASM_NOKPROBE_SYMBOL(ret_from_except_lite);
-_ASM_NOKPROBE_SYMBOL(resume_kernel);
-_ASM_NOKPROBE_SYMBOL(restore);
-_ASM_NOKPROBE_SYMBOL(fast_exception_return);
+ b interrupt_return
/*
* Trampolines used when spotting a bad kernel stack pointer in
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 5b72abbff96c..08a747b92735 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -104,82 +104,6 @@ static inline notrace unsigned long get_irq_happened(void)
return happened;
}
-#ifdef CONFIG_PPC_BOOK3E
-
-/* This is called whenever we are re-enabling interrupts
- * and returns either 0 (nothing to do) or 500/900/280 if
- * there's an EE, DEC or DBELL to generate.
- *
- * This is called in two contexts: From arch_local_irq_restore()
- * before soft-enabling interrupts, and from the exception exit
- * path when returning from an interrupt from a soft-disabled to
- * a soft enabled context. In both case we have interrupts hard
- * disabled.
- *
- * We take care of only clearing the bits we handled in the
- * PACA irq_happened field since we can only re-emit one at a
- * time and we don't want to "lose" one.
- */
-notrace unsigned int __check_irq_replay(void)
-{
- /*
- * We use local_paca rather than get_paca() to avoid all
- * the debug_smp_processor_id() business in this low level
- * function
- */
- unsigned char happened = local_paca->irq_happened;
-
- /*
- * We are responding to the next interrupt, so interrupt-off
- * latencies should be reset here.
- */
- trace_hardirqs_on();
- trace_hardirqs_off();
-
- if (happened & PACA_IRQ_DEC) {
- local_paca->irq_happened &= ~PACA_IRQ_DEC;
- return 0x900;
- }
-
- if (happened & PACA_IRQ_EE) {
- local_paca->irq_happened &= ~PACA_IRQ_EE;
- return 0x500;
- }
-
- if (happened & PACA_IRQ_DBELL) {
- local_paca->irq_happened &= ~PACA_IRQ_DBELL;
- return 0x280;
- }
-
- if (happened & PACA_IRQ_HARD_DIS)
- local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
-
- /* There should be nothing left ! */
- BUG_ON(local_paca->irq_happened != 0);
-
- return 0;
-}
-
-/*
- * This is specifically called by assembly code to re-enable interrupts
- * if they are currently disabled. This is typically called before
- * schedule() or do_signal() when returning to userspace. We do it
- * in C to avoid the burden of dealing with lockdep etc...
- *
- * NOTE: This is called with interrupts hard disabled but not marked
- * as such in paca->irq_happened, so we need to resync this.
- */
-void notrace restore_interrupts(void)
-{
- if (irqs_disabled()) {
- local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
- local_irq_enable();
- } else
- __hard_irq_enable();
-}
-
-#endif /* CONFIG_PPC_BOOK3E */
-
void replay_soft_interrupts(void)
{
struct pt_regs regs;
--
2.23.0
next prev parent reply other threads:[~2021-03-16 10:44 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-16 10:41 [PATCH v2 00/11] Move 64e to new interrupt return code Nicholas Piggin
2021-03-16 10:41 ` [PATCH v2 01/11] powerpc/syscall: switch user_exit_irqoff and trace_hardirqs_off order Nicholas Piggin
2021-03-16 10:41 ` [PATCH v2 02/11] powerpc/64e/interrupt: always save nvgprs on interrupt Nicholas Piggin
2021-03-16 10:41 ` [PATCH v2 03/11] powerpc/interrupt: update common interrupt code for Nicholas Piggin
2021-03-16 10:41 ` Nicholas Piggin [this message]
2021-03-16 10:49 ` [PATCH v2 04/11] powerpc/64e/interrupt: use new interrupt return Christophe Leroy
2021-03-17 10:05 ` Nicholas Piggin
2021-03-16 10:41 ` [PATCH v2 05/11] powerpc/64e/interrupt: NMI save irq soft-mask state in C Nicholas Piggin
2021-03-16 10:42 ` [PATCH v2 06/11] powerpc/64e/interrupt: reconcile " Nicholas Piggin
2021-03-16 10:42 ` [PATCH v2 07/11] powerpc/64e/interrupt: Use new interrupt context tracking scheme Nicholas Piggin
2021-03-16 10:42 ` [PATCH v2 08/11] powerpc/64e/interrupt: handle bad_page_fault in C Nicholas Piggin
2021-03-16 10:42 ` [PATCH v2 09/11] powerpc: clean up do_page_fault Nicholas Piggin
2021-03-16 10:42 ` [PATCH v2 10/11] powerpc: remove partial register save logic Nicholas Piggin
2021-03-16 10:42 ` [PATCH v2 11/11] powerpc: move norestart trap flag to bit 0 Nicholas Piggin
2021-04-19 4:00 ` [PATCH v2 00/11] Move 64e to new interrupt return code Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210316104206.407354-5-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=oss@buserror.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.