From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: me@freedesktop.org
Subject: [Intel-gfx] [PATCH v2 21/50] drm/i915/adl_p: Add dedicated SAGV watermarks
Date: Thu, 25 Mar 2021 11:06:51 -0700 [thread overview]
Message-ID: <20210325180720.401410-22-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210325180720.401410-1-matthew.d.roper@intel.com>
XE_LPD reduces the number of regular watermark latency levels from 8
to 6 on non-dgfx platforms. However the hardware also adds a special
purpose SAGV wateramrk (and an accompanying transition watermark) that
will be used by the hardware in place of the level 0 values during SAGV
transitions.
Bspec: 49325, 49326, 50419
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 32 +++++++++++
drivers/gpu/drm/i915/i915_drv.h | 2 +
drivers/gpu/drm/i915/i915_reg.h | 59 ++++++++++++++------
drivers/gpu/drm/i915/intel_pm.c | 56 +++++++++++++++++--
4 files changed, 128 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index d1b067586c0b..d04924d405e5 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -9275,6 +9275,38 @@ static void verify_wm_state(struct intel_crtc *crtc,
hw_wm_level->lines);
}
+ hw_wm_level = &hw->wm.planes[plane->id].sagv.wm0;
+ sw_wm_level = &sw_wm->planes[plane->id].sagv.wm0;
+
+ if (HAS_HW_SAGV_WM(dev_priv) &&
+ !skl_wm_level_equals(hw_wm_level, sw_wm_level)) {
+ drm_err(&dev_priv->drm,
+ "[PLANE:%d:%s] mismatch in SAGV WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
+ plane->base.base.id, plane->base.name,
+ sw_wm_level->enable,
+ sw_wm_level->blocks,
+ sw_wm_level->lines,
+ hw_wm_level->enable,
+ hw_wm_level->blocks,
+ hw_wm_level->lines);
+ }
+
+ hw_wm_level = &hw->wm.planes[plane->id].sagv.trans_wm;
+ sw_wm_level = &sw_wm->planes[plane->id].sagv.trans_wm;
+
+ if (HAS_HW_SAGV_WM(dev_priv) &&
+ !skl_wm_level_equals(hw_wm_level, sw_wm_level)) {
+ drm_err(&dev_priv->drm,
+ "[PLANE:%d:%s] mismatch in SAGV trans WM (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
+ plane->base.base.id, plane->base.name,
+ sw_wm_level->enable,
+ sw_wm_level->blocks,
+ sw_wm_level->lines,
+ hw_wm_level->enable,
+ hw_wm_level->blocks,
+ hw_wm_level->lines);
+ }
+
/* DDB */
hw_ddb_entry = &hw->ddb_y[plane->id];
sw_ddb_entry = &new_crtc_state->wm.skl.plane_ddb_y[plane->id];
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ab1db490bbcf..68e216f5e0bb 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -581,6 +581,8 @@ i915_fence_timeout(const struct drm_i915_private *i915)
/* Amount of SAGV/QGV points, BSpec precisely defines this */
#define I915_NUM_QGV_POINTS 8
+#define HAS_HW_SAGV_WM(i915) ((DISPLAY_VER(i915) == 13) && !IS_DGFX(i915))
+
struct ddi_vbt_port_info {
/* Non-NULL if port present. */
struct intel_bios_encoder_data *devdata;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 73ffdbc4e382..e39c2bbaa490 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6426,16 +6426,28 @@ enum {
/* Watermark register definitions for SKL */
#define _CUR_WM_A_0 0x70140
#define _CUR_WM_B_0 0x71140
+#define _CUR_WM_SAGV_A 0x70158
+#define _CUR_WM_SAGV_B 0x71158
+#define _CUR_WM_SAGV_TRANS_A 0x7015C
+#define _CUR_WM_SAGV_TRANS_B 0x7115C
+#define _CUR_WM_TRANS_A 0x70168
+#define _CUR_WM_TRANS_B 0x71168
#define _PLANE_WM_1_A_0 0x70240
#define _PLANE_WM_1_B_0 0x71240
#define _PLANE_WM_2_A_0 0x70340
#define _PLANE_WM_2_B_0 0x71340
-#define _PLANE_WM_TRANS_1_A_0 0x70268
-#define _PLANE_WM_TRANS_1_B_0 0x71268
-#define _PLANE_WM_TRANS_2_A_0 0x70368
-#define _PLANE_WM_TRANS_2_B_0 0x71368
-#define _CUR_WM_TRANS_A_0 0x70168
-#define _CUR_WM_TRANS_B_0 0x71168
+#define _PLANE_WM_SAGV_1_A 0x70258
+#define _PLANE_WM_SAGV_1_B 0x71258
+#define _PLANE_WM_SAGV_2_A 0x70358
+#define _PLANE_WM_SAGV_2_B 0x71358
+#define _PLANE_WM_SAGV_TRANS_1_A 0x7025C
+#define _PLANE_WM_SAGV_TRANS_1_B 0x7125C
+#define _PLANE_WM_SAGV_TRANS_2_A 0x7035C
+#define _PLANE_WM_SAGV_TRANS_2_B 0x7135C
+#define _PLANE_WM_TRANS_1_A 0x70268
+#define _PLANE_WM_TRANS_1_B 0x71268
+#define _PLANE_WM_TRANS_2_A 0x70368
+#define _PLANE_WM_TRANS_2_B 0x71368
#define PLANE_WM_EN (1 << 31)
#define PLANE_WM_IGNORE_LINES (1 << 30)
#define PLANE_WM_LINES_MASK REG_GENMASK(21, 14)
@@ -6443,19 +6455,32 @@ enum {
#define _CUR_WM_0(pipe) _PIPE(pipe, _CUR_WM_A_0, _CUR_WM_B_0)
#define CUR_WM(pipe, level) _MMIO(_CUR_WM_0(pipe) + ((4) * (level)))
-#define CUR_WM_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_TRANS_A_0, _CUR_WM_TRANS_B_0)
-
+#define CUR_WM_SAGV(pipe) _MMIO_PIPE(pipe, _CUR_WM_SAGV_A, _CUR_WM_SAGV_B)
+#define CUR_WM_SAGV_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_SAGV_TRANS_A, _CUR_WM_SAGV_TRANS_B)
+#define CUR_WM_TRANS(pipe) _MMIO_PIPE(pipe, _CUR_WM_TRANS_A, _CUR_WM_TRANS_B)
#define _PLANE_WM_1(pipe) _PIPE(pipe, _PLANE_WM_1_A_0, _PLANE_WM_1_B_0)
#define _PLANE_WM_2(pipe) _PIPE(pipe, _PLANE_WM_2_A_0, _PLANE_WM_2_B_0)
-#define _PLANE_WM_BASE(pipe, plane) \
- _PLANE(plane, _PLANE_WM_1(pipe), _PLANE_WM_2(pipe))
-#define PLANE_WM(pipe, plane, level) \
- _MMIO(_PLANE_WM_BASE(pipe, plane) + ((4) * (level)))
-#define _PLANE_WM_TRANS_1(pipe) \
- _PIPE(pipe, _PLANE_WM_TRANS_1_A_0, _PLANE_WM_TRANS_1_B_0)
-#define _PLANE_WM_TRANS_2(pipe) \
- _PIPE(pipe, _PLANE_WM_TRANS_2_A_0, _PLANE_WM_TRANS_2_B_0)
-#define PLANE_WM_TRANS(pipe, plane) \
+#define _PLANE_WM_BASE(pipe, plane) \
+ _PLANE(plane, _PLANE_WM_1(pipe), _PLANE_WM_2(pipe))
+#define PLANE_WM(pipe, plane, level) \
+ _MMIO(_PLANE_WM_BASE(pipe, plane) + ((4) * (level)))
+#define _PLANE_WM_SAGV_1(pipe) \
+ _PIPE(pipe, _PLANE_WM_SAGV_1_A, _PLANE_WM_SAGV_1_B)
+#define _PLANE_WM_SAGV_2(pipe) \
+ _PIPE(pipe, _PLANE_WM_SAGV_2_A, _PLANE_WM_SAGV_2_B)
+#define PLANE_WM_SAGV(pipe, plane) \
+ _MMIO(_PLANE(plane, _PLANE_WM_SAGV_1(pipe), _PLANE_WM_SAGV_2(pipe)))
+#define _PLANE_WM_SAGV_TRANS_1(pipe) \
+ _PIPE(pipe, _PLANE_WM_SAGV_TRANS_1_A, _PLANE_WM_SAGV_TRANS_1_B)
+#define _PLANE_WM_SAGV_TRANS_2(pipe) \
+ _PIPE(pipe, _PLANE_WM_SAGV_TRANS_2_A, _PLANE_WM_SAGV_TRANS_2_B)
+#define PLANE_WM_SAGV_TRANS(pipe, plane) \
+ _MMIO(_PLANE(plane, _PLANE_WM_SAGV_TRANS_1(pipe), _PLANE_WM_SAGV_TRANS_2(pipe)))
+#define _PLANE_WM_TRANS_1(pipe) \
+ _PIPE(pipe, _PLANE_WM_TRANS_1_A, _PLANE_WM_TRANS_1_B)
+#define _PLANE_WM_TRANS_2(pipe) \
+ _PIPE(pipe, _PLANE_WM_TRANS_2_A, _PLANE_WM_TRANS_2_B)
+#define PLANE_WM_TRANS(pipe, plane) \
_MMIO(_PLANE(plane, _PLANE_WM_TRANS_1(pipe), _PLANE_WM_TRANS_2(pipe)))
/* define the Watermark register on Ironlake */
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 18ee225016fa..acc6c2b9e6e9 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2982,7 +2982,9 @@ static void intel_fixup_cur_wm_latency(struct drm_i915_private *dev_priv,
int ilk_wm_max_level(const struct drm_i915_private *dev_priv)
{
/* how many WM levels are we expecting */
- if (DISPLAY_VER(dev_priv) >= 9)
+ if (HAS_HW_SAGV_WM(dev_priv))
+ return 5;
+ else if (DISPLAY_VER(dev_priv) >= 9)
return 7;
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
return 4;
@@ -4010,8 +4012,10 @@ static int intel_compute_sagv_mask(struct intel_atomic_state *state)
* latter from the plane commit hooks (especially in the legacy
* cursor case)
*/
- pipe_wm->use_sagv_wm = DISPLAY_VER(dev_priv) >= 12 &&
- intel_can_enable_sagv(dev_priv, new_bw_state);
+
+ pipe_wm->use_sagv_wm = !HAS_HW_SAGV_WM(dev_priv) &&
+ DISPLAY_VER(dev_priv) >= 12 &&
+ intel_can_enable_sagv(dev_priv, new_bw_state);
}
if (intel_can_enable_sagv(dev_priv, new_bw_state) !=
@@ -5633,6 +5637,13 @@ void skl_write_plane_wm(struct intel_plane *plane,
skl_write_wm_level(dev_priv, PLANE_WM_TRANS(pipe, plane_id),
skl_plane_trans_wm(pipe_wm, plane_id));
+ if (HAS_HW_SAGV_WM(dev_priv)) {
+ skl_write_wm_level(dev_priv, PLANE_WM_SAGV(pipe, plane_id),
+ &wm->sagv.wm0);
+ skl_write_wm_level(dev_priv, PLANE_WM_SAGV_TRANS(pipe, plane_id),
+ &wm->sagv.trans_wm);
+ }
+
if (DISPLAY_VER(dev_priv) >= 11) {
skl_ddb_entry_write(dev_priv,
PLANE_BUF_CFG(pipe, plane_id), ddb_y);
@@ -5666,6 +5677,15 @@ void skl_write_cursor_wm(struct intel_plane *plane,
skl_write_wm_level(dev_priv, CUR_WM_TRANS(pipe),
skl_plane_trans_wm(pipe_wm, plane_id));
+ if (HAS_HW_SAGV_WM(dev_priv)) {
+ const struct skl_plane_wm *wm = &pipe_wm->planes[plane_id];
+
+ skl_write_wm_level(dev_priv, CUR_WM_SAGV(pipe),
+ &wm->sagv.wm0);
+ skl_write_wm_level(dev_priv, CUR_WM_SAGV_TRANS(pipe),
+ &wm->sagv.trans_wm);
+ }
+
skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe), ddb);
}
@@ -6030,6 +6050,15 @@ static bool skl_plane_selected_wm_equals(struct intel_plane *plane,
return false;
}
+ if (HAS_HW_SAGV_WM(i915)) {
+ const struct skl_plane_wm *old_wm = &old_pipe_wm->planes[plane->id];
+ const struct skl_plane_wm *new_wm = &new_pipe_wm->planes[plane->id];
+
+ if (!skl_wm_level_equals(&old_wm->sagv.wm0, &new_wm->sagv.wm0) ||
+ !skl_wm_level_equals(&old_wm->sagv.trans_wm, &new_wm->sagv.trans_wm))
+ return false;
+ }
+
return skl_wm_level_equals(skl_plane_trans_wm(old_pipe_wm, plane->id),
skl_plane_trans_wm(new_pipe_wm, plane->id));
}
@@ -6248,7 +6277,26 @@ void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
skl_wm_level_from_reg_val(val, &wm->trans_wm);
- if (DISPLAY_VER(dev_priv) >= 12) {
+
+ if (HAS_HW_SAGV_WM(dev_priv)) {
+ if (plane_id != PLANE_CURSOR)
+ val = intel_uncore_read(&dev_priv->uncore,
+ PLANE_WM_SAGV(pipe, plane_id));
+ else
+ val = intel_uncore_read(&dev_priv->uncore,
+ CUR_WM_SAGV(pipe));
+
+ skl_wm_level_from_reg_val(val, &wm->sagv.wm0);
+
+ if (plane_id != PLANE_CURSOR)
+ val = intel_uncore_read(&dev_priv->uncore,
+ PLANE_WM_SAGV_TRANS(pipe, plane_id));
+ else
+ val = intel_uncore_read(&dev_priv->uncore,
+ CUR_WM_SAGV_TRANS(pipe));
+
+ skl_wm_level_from_reg_val(val, &wm->sagv.trans_wm);
+ } else if (DISPLAY_VER(dev_priv) >= 12) {
wm->sagv.wm0 = wm->wm[0];
wm->sagv.trans_wm = wm->trans_wm;
}
--
2.25.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2021-03-25 18:07 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-25 18:06 [Intel-gfx] [PATCH v2 00/50] Introduce Alder Lake-P Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 01/50] drm/i915/xelpd: add XE_LPD display characteristics Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 02/50] drm/i915/xelpd: Handle proper AUX interrupt bits Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 03/50] drm/i915/xelpd: Enhanced pipe underrun reporting Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 04/50] drm/i915/xelpd: Define plane capabilities Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 05/50] drm/i915/xelpd: Support 128k plane stride Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 06/50] drm/i915/xelpd: Handle new location of outputs D and E Matt Roper
2021-03-26 16:45 ` Imre Deak
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 07/50] drm/i915/xelpd: Add XE_LPD power wells Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 08/50] drm/i915/xelpd: Handle LPSP for XE_LPD Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 09/50] drm/i915/xelpd: Increase maximum watermark lines to 255 Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 10/50] drm/i915/xelpd: Required bandwidth increases when VT-d is active Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 11/50] drm/i915/xelpd: Add Wa_14011503030 Matt Roper
2021-03-25 21:06 ` Souza, Jose
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 12/50] drm/i915/display/dsc: Refactor intel_dp_dsc_compute_bpp Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 13/50] drm/i915/xelpd: Support DP1.4 compression BPPs Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 14/50] drm/i915: Get slice height before computing rc params Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 15/50] drm/i915/xelpd: Calculate VDSC RC parameters Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 16/50] drm/i915/xelpd: Add rc_qp_table for rcparams calculation Matt Roper
2021-04-07 12:58 ` Jani Nikula
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 17/50] drm/i915/xelpd: Add VRR guardband for VRR CTL Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 18/50] drm/i915/adl_p: Add PCI Devices IDs Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 19/50] drm/i915/adl_p: ADL_P device info enabling Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 20/50] drm/i915/adl_p: Add PCH support Matt Roper
2021-03-25 18:06 ` Matt Roper [this message]
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 22/50] drm/i915/adl_p: Extend PLANE_WM bits for blocks & lines Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 23/50] drm/i915/adl_p: Load DMC Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 24/50] drm/i915/adl_p: Setup ports/phys Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 25/50] drm/i915/adl_p: Add cdclk support for ADL-P Matt Roper
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 26/50] drm/i915/display/tc: Rename safe_mode functions ownership Matt Roper
2021-03-26 16:31 ` Imre Deak
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 27/50] drm/i915/adl_p: Handle TC cold Matt Roper
2021-03-26 16:30 ` Imre Deak
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 28/50] drm/i915/adl_p: Implement TC sequences Matt Roper
2021-03-26 16:03 ` Imre Deak
2021-03-25 18:06 ` [Intel-gfx] [PATCH v2 29/50] drm/i915/adl_p: Enable modular fia Matt Roper
2021-03-26 16:31 ` Imre Deak
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 30/50] drm/i915/adl_p: Don't config MBUS and DBUF during display initialization Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 31/50] drm/i915/adl_p: Add ddb allocation support Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 32/50] drm/i915: Introduce MBUS relative dbuf offsets Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 33/50] drm/i915: Move intel_modeset_all_pipes() Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 34/50] drm/i915/adl_p: MBUS programming Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 35/50] drm/i915/adl_p: Tx escape clock with DSI Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 36/50] drm/i915/adl_p: Add initial ADL_P Workarounds Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 37/50] drm/i915/adlp: Define GuC/HuC for Alderlake_P Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 38/50] drm/i915/adl_p: Define and use ADL-P specific DP translation tables Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 39/50] drm/i915/adl_p: Enable/disable loadgen sharing Matt Roper
2021-03-26 16:18 ` Imre Deak
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 40/50] drm/i915/adl_p: Add PLL Support Matt Roper
2021-03-26 16:25 ` Imre Deak
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 41/50] drm/i915/bigjoiner: Mode validation with uncompressed pipe joiner Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 42/50] drm/i915/bigjoiner: Avoid dsc_compute_config for uncompressed bigjoiner Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 43/50] drm/i915/bigjoiner: atomic commit changes for uncompressed joiner Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 44/50] drm/i915/adlp: Add PIPE_MISC2 programming Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 45/50] drm/i915/adl_p: Update memory bandwidth parameters Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 46/50] drm/i915/adl_p: Implement Wa_22011091694 Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 47/50] drm/i915/display/adl_p: Implement Wa_22011320316 Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 48/50] drm/i915/display/adl_p: Remove CCS support Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 49/50] drm/i915/perf: Enable OA formats for ADL_P Matt Roper
2021-03-25 18:07 ` [Intel-gfx] [PATCH v2 50/50] drm/i915/display/adl_p: Implement PSR changes Matt Roper
2021-03-25 22:43 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce Alder Lake-P (rev2) Patchwork
2021-03-25 22:45 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2021-03-25 22:48 ` [Intel-gfx] ✗ Fi.CI.DOCS: " Patchwork
2021-03-25 23:12 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-03-26 4:33 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2021-04-21 11:03 ` [Intel-gfx] [PATCH v2 00/50] Introduce Alder Lake-P Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210325180720.401410-22-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=me@freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.