All of lore.kernel.org
 help / color / mirror / Atom feed
From: Julien Grall <julien@xen.org>
To: xen-devel@lists.xenproject.org
Cc: Wei.Chen@arm.com, Henry.Wang@arm.com, Penny.Zheng@arm.com,
	Bertrand.Marquis@arm.com, "Wei Liu" <wei.liu2@citrix.com>,
	"Stefano Stabellini" <sstabellini@kernel.org>,
	"Julien Grall" <julien@xen.org>,
	"Volodymyr Babchuk" <Volodymyr_Babchuk@epam.com>,
	"Hongyan Xia" <hongyxia@amazon.com>,
	"Julien Grall" <jgrall@amazon.com>,
	"Jan Beulich" <jbeulich@suse.com>, "Wei Liu" <wl@xen.org>,
	"Andrew Cooper" <andrew.cooper3@citrix.com>,
	"Roger Pau Monné" <roger.pau@citrix.com>,
	"Hongian Xia" <hongyax@amazon.com>
Subject: [PATCH RFCv2 12/15] xen/arm: add Persistent Map (PMAP) infrastructure
Date: Sun, 25 Apr 2021 21:13:15 +0100	[thread overview]
Message-ID: <20210425201318.15447-13-julien@xen.org> (raw)
In-Reply-To: <20210425201318.15447-1-julien@xen.org>

From: Wei Liu <wei.liu2@citrix.com>

The basic idea is like Persistent Kernel Map (PKMAP) in Linux. We
pre-populate all the relevant page tables before the system is fully
set up.

We will need it on Arm in order to rework the arm64 version of
xenheap_setup_mappings() as we may need to use pages allocated from
the boot allocator before they are effectively mapped.

This infrastructure is not lock-protected therefore can only be used
before smpboot. After smpboot, map_domain_page() has to be used.

This is based on the x86 version [1] that was originally implemented
by Wei Liu.

Take the opportunity to switch the parameter attr from unsigned to
unsigned int.

[1] <e92da4ad6015b6089737fcccba3ec1d6424649a5.1588278317.git.hongyxia@amazon.com>

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Hongyan Xia <hongyxia@amazon.com>
[julien: Adapted for Arm]
Signed-off-by: Julien Grall <jgrall@amazon.com>

---
    Changes in v2:
        - New patch

Cc: Jan Beulich <jbeulich@suse.com>
Cc: Wei Liu <wl@xen.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Hongian Xia <hongyax@amazon.com>

This is mostly a copy of the PMAP infrastructure currently discussed
on x86. The only difference is how the page-tables are updated.

I think we want to consider to provide a common infrastructure. But
I haven't done it yet to gather feedback on the overall series
first.
---
 xen/arch/arm/Makefile        |   1 +
 xen/arch/arm/mm.c            |   7 +--
 xen/arch/arm/pmap.c          | 101 +++++++++++++++++++++++++++++++++++
 xen/include/asm-arm/config.h |   2 +
 xen/include/asm-arm/lpae.h   |   8 +++
 xen/include/asm-arm/pmap.h   |  10 ++++
 6 files changed, 123 insertions(+), 6 deletions(-)
 create mode 100644 xen/arch/arm/pmap.c
 create mode 100644 xen/include/asm-arm/pmap.h

diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
index ca75f1040dcc..2196ada24941 100644
--- a/xen/arch/arm/Makefile
+++ b/xen/arch/arm/Makefile
@@ -40,6 +40,7 @@ obj-y += percpu.o
 obj-y += platform.o
 obj-y += platform_hypercall.o
 obj-y += physdev.o
+obj-y += pmap.init.o
 obj-y += processor.o
 obj-y += psci.o
 obj-y += setup.o
diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
index d090fdfd5994..5e713b599611 100644
--- a/xen/arch/arm/mm.c
+++ b/xen/arch/arm/mm.c
@@ -288,12 +288,7 @@ void dump_hyp_walk(vaddr_t addr)
     dump_pt_walk(ttbr, addr, HYP_PT_ROOT_LEVEL, 1);
 }
 
-/*
- * Standard entry type that we'll use to build Xen's own pagetables.
- * We put the same permissions at every level, because they're ignored
- * by the walker in non-leaf entries.
- */
-static inline lpae_t mfn_to_xen_entry(mfn_t mfn, unsigned attr)
+lpae_t mfn_to_xen_entry(mfn_t mfn, unsigned int attr)
 {
     lpae_t e = (lpae_t) {
         .pt = {
diff --git a/xen/arch/arm/pmap.c b/xen/arch/arm/pmap.c
new file mode 100644
index 000000000000..702b1bde982d
--- /dev/null
+++ b/xen/arch/arm/pmap.c
@@ -0,0 +1,101 @@
+#include <xen/init.h>
+#include <xen/mm.h>
+
+#include <asm/bitops.h>
+#include <asm/flushtlb.h>
+#include <asm/pmap.h>
+
+/*
+ * To be able to use FIXMAP_PMAP_BEGIN.
+ * XXX: move fixmap definition in a separate header
+ */
+#include <xen/acpi.h>
+
+/*
+ * Simple mapping infrastructure to map / unmap pages in fixed map.
+ * This is used to set up the page table for mapcache, which is used
+ * by map domain page infrastructure.
+ *
+ * This structure is not protected by any locks, so it must not be used after
+ * smp bring-up.
+ */
+
+/* Bitmap to track which slot is used */
+static unsigned long __initdata inuse;
+
+/* XXX: Find an header to declare it */
+extern lpae_t xen_fixmap[LPAE_ENTRIES];
+
+void *__init pmap_map(mfn_t mfn)
+{
+    unsigned long flags;
+    unsigned int idx;
+    vaddr_t linear;
+    unsigned int slot;
+    lpae_t *entry, pte;
+
+    BUILD_BUG_ON(sizeof(inuse) * BITS_PER_LONG < NUM_FIX_PMAP);
+
+    ASSERT(system_state < SYS_STATE_smp_boot);
+
+    local_irq_save(flags);
+
+    idx = find_first_zero_bit(&inuse, NUM_FIX_PMAP);
+    if ( idx == NUM_FIX_PMAP )
+        panic("Out of PMAP slots\n");
+
+    __set_bit(idx, &inuse);
+
+    slot = idx + FIXMAP_PMAP_BEGIN;
+    ASSERT(slot >= FIXMAP_PMAP_BEGIN && slot <= FIXMAP_PMAP_END);
+
+    linear = FIXMAP_ADDR(slot);
+    /*
+     * We cannot use set_fixmap() here. We use PMAP when there is no direct map,
+     * so map_pages_to_xen() called by set_fixmap() needs to map pages on
+     * demand, which then calls pmap() again, resulting in a loop. Modify the
+     * PTEs directly instead. The same is true for pmap_unmap().
+     */
+    entry = &xen_fixmap[third_table_offset(linear)];
+
+    ASSERT(!lpae_is_valid(*entry));
+
+    pte = mfn_to_xen_entry(mfn, PAGE_HYPERVISOR_RW);
+    pte.pt.table = 1;
+    write_pte(entry, pte);
+
+    local_irq_restore(flags);
+
+    return (void *)linear;
+}
+
+void __init pmap_unmap(const void *p)
+{
+    unsigned long flags;
+    unsigned int idx;
+    lpae_t *entry;
+    lpae_t pte = { 0 };
+    unsigned int slot = third_table_offset((vaddr_t)p);
+
+    ASSERT(system_state < SYS_STATE_smp_boot);
+    ASSERT(slot >= FIXMAP_PMAP_BEGIN && slot <= FIXMAP_PMAP_END);
+
+    idx = slot - FIXMAP_PMAP_BEGIN;
+    local_irq_save(flags);
+
+    __clear_bit(idx, &inuse);
+    entry = &xen_fixmap[third_table_offset((vaddr_t)p)];
+    write_pte(entry, pte);
+    flush_xen_tlb_range_va_local((vaddr_t)p, PAGE_SIZE);
+
+    local_irq_restore(flags);
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
diff --git a/xen/include/asm-arm/config.h b/xen/include/asm-arm/config.h
index 85d4a510ce8a..35050855b6e1 100644
--- a/xen/include/asm-arm/config.h
+++ b/xen/include/asm-arm/config.h
@@ -180,6 +180,8 @@
 #define FIXMAP_MISC     1  /* Ephemeral mappings of hardware */
 #define FIXMAP_ACPI_BEGIN  2  /* Start mappings of ACPI tables */
 #define FIXMAP_ACPI_END    (FIXMAP_ACPI_BEGIN + NUM_FIXMAP_ACPI_PAGES - 1)  /* End mappings of ACPI tables */
+#define FIXMAP_PMAP_BEGIN (FIXMAP_ACPI_END + 1)
+#define FIXMAP_PMAP_END (FIXMAP_PMAP_BEGIN + NUM_FIX_PMAP - 1)
 
 #define NR_hypercalls 64
 
diff --git a/xen/include/asm-arm/lpae.h b/xen/include/asm-arm/lpae.h
index 310f5225e056..81fd482ab2ce 100644
--- a/xen/include/asm-arm/lpae.h
+++ b/xen/include/asm-arm/lpae.h
@@ -4,6 +4,7 @@
 #ifndef __ASSEMBLY__
 
 #include <xen/page-defs.h>
+#include <xen/mm-frame.h>
 
 /*
  * WARNING!  Unlike the x86 pagetable code, where l1 is the lowest level and
@@ -168,6 +169,13 @@ static inline bool lpae_is_superpage(lpae_t pte, unsigned int level)
         third_table_offset(addr)            \
     }
 
+/*
+ * Standard entry type that we'll use to build Xen's own pagetables.
+ * We put the same permissions at every level, because they're ignored
+ * by the walker in non-leaf entries.
+ */
+lpae_t mfn_to_xen_entry(mfn_t mfn, unsigned int attr);
+
 #endif /* __ASSEMBLY__ */
 
 /*
diff --git a/xen/include/asm-arm/pmap.h b/xen/include/asm-arm/pmap.h
new file mode 100644
index 000000000000..8e1dce93f8e4
--- /dev/null
+++ b/xen/include/asm-arm/pmap.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_PMAP_H__
+#define __ARM_PMAP_H__
+
+/* Large enough for mapping 5 levels of page tables with some headroom */
+#define NUM_FIX_PMAP 8
+
+void *pmap_map(mfn_t mfn);
+void pmap_unmap(const void *p);
+
+#endif	/* __ASM_PMAP_H__ */
-- 
2.17.1



  parent reply	other threads:[~2021-04-25 20:32 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-25 20:13 [PATCH RFCv2 00/15] xen/arm: mm: Remove open-coding mappings Julien Grall
2021-04-25 20:13 ` [PATCH RFCv2 01/15] xen/arm: lpae: Rename LPAE_ENTRIES_MASK_GS to LPAE_ENTRY_MASK_GS Julien Grall
2021-05-11 22:12   ` Stefano Stabellini
2021-04-25 20:13 ` [PATCH RFCv2 02/15] xen/arm: lpae: Use the generic helpers to defined the Xen PT helpers Julien Grall
2021-05-11 22:26   ` Stefano Stabellini
2021-05-12 14:26     ` Julien Grall
2021-05-12 21:30       ` Stefano Stabellini
2021-05-12 22:16         ` Julien Grall
2021-05-13 22:44           ` Stefano Stabellini
2021-07-03 17:32             ` Julien Grall
2021-07-13 20:53               ` Stefano Stabellini
2021-07-14 17:40                 ` Julien Grall
2021-04-25 20:13 ` [PATCH RFCv2 03/15] xen/arm: p2m: Replace level_{orders, masks} arrays with LEVEL_{ORDER, MASK} Julien Grall
2021-05-11 22:33   ` Stefano Stabellini
2021-05-12 14:39     ` Julien Grall
2021-04-25 20:13 ` [PATCH RFCv2 04/15] xen/arm: mm: Allow other mapping size in xen_pt_update_entry() Julien Grall
2021-05-11 22:42   ` Stefano Stabellini
2021-04-25 20:13 ` [PATCH RFCv2 05/15] xen/arm: mm: Avoid flushing the TLBs when mapping are inserted Julien Grall
2021-05-11 22:51   ` Stefano Stabellini
2021-04-25 20:13 ` [PATCH RFCv2 06/15] xen/arm: mm: Don't open-code Xen PT update in remove_early_mappings() Julien Grall
2021-05-11 22:58   ` Stefano Stabellini
2021-04-25 20:13 ` [PATCH RFCv2 07/15] xen/arm: mm: Re-implement early_fdt_map() using map_pages_to_xen() Julien Grall
2021-05-12 21:41   ` Stefano Stabellini
2021-05-12 22:18     ` Julien Grall
2021-04-25 20:13 ` [PATCH RFCv2 08/15] xen/arm32: mm: Check if the virtual address is shared before updating it Julien Grall
2021-05-12 22:00   ` Stefano Stabellini
2021-05-12 22:23     ` Julien Grall
2021-05-13 22:32       ` Stefano Stabellini
2021-05-13 22:59         ` Julien Grall
2021-05-14  1:04           ` Stefano Stabellini
2021-04-25 20:13 ` [PATCH RFCv2 09/15] xen/arm32: mm: Re-implement setup_xenheap_mappings() using map_pages_to_xen() Julien Grall
2021-05-12 22:07   ` Stefano Stabellini
2021-05-13 17:55     ` Julien Grall
2021-04-25 20:13 ` [PATCH RFCv2 10/15] xen/arm: mm: Allocate xen page tables in domheap rather than xenheap Julien Grall
2021-05-12 22:44   ` Stefano Stabellini
2021-05-13 18:09     ` Julien Grall
2021-05-13 22:27       ` Stefano Stabellini
2021-05-15  8:48         ` Julien Grall
2021-05-18  0:37           ` Stefano Stabellini
2021-04-25 20:13 ` [PATCH RFCv2 11/15] xen/arm: mm: Allow page-table allocation from the boot allocator Julien Grall
2021-05-13 22:58   ` Stefano Stabellini
2021-04-25 20:13 ` Julien Grall [this message]
2021-04-26  9:41   ` [PATCH RFCv2 12/15] xen/arm: add Persistent Map (PMAP) infrastructure Xia, Hongyan
2021-07-03 17:57     ` Julien Grall
2021-04-28 21:47   ` Wei Liu
2021-05-14 23:25   ` Stefano Stabellini
2021-05-15  8:54     ` Julien Grall
2021-04-25 20:13 ` [PATCH RFCv2 13/15] xen/arm: mm: Use the PMAP helpers in xen_{,un}map_table() Julien Grall
2021-05-14 23:35   ` Stefano Stabellini
2021-05-15  9:03     ` Julien Grall
2021-04-25 20:13 ` [PATCH RFCv2 14/15] xen/arm: mm: Rework setup_xenheap_mappings() Julien Grall
2021-05-14 23:51   ` Stefano Stabellini
2021-05-15  9:21     ` Julien Grall
2021-05-18  0:50       ` Stefano Stabellini
2022-02-12 19:16         ` Julien Grall
2021-04-25 20:13 ` [PATCH RFCv2 15/15] xen/arm: mm: Re-implement setup_frame_table_mappings() with map_pages_to_xen() Julien Grall
2021-05-15  0:02   ` Stefano Stabellini
2021-05-15  9:25     ` Julien Grall
2021-05-18  0:51       ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210425201318.15447-13-julien@xen.org \
    --to=julien@xen.org \
    --cc=Bertrand.Marquis@arm.com \
    --cc=Henry.Wang@arm.com \
    --cc=Penny.Zheng@arm.com \
    --cc=Volodymyr_Babchuk@epam.com \
    --cc=Wei.Chen@arm.com \
    --cc=andrew.cooper3@citrix.com \
    --cc=hongyax@amazon.com \
    --cc=hongyxia@amazon.com \
    --cc=jbeulich@suse.com \
    --cc=jgrall@amazon.com \
    --cc=roger.pau@citrix.com \
    --cc=sstabellini@kernel.org \
    --cc=wei.liu2@citrix.com \
    --cc=wl@xen.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.