From: Luke Shumaker <lukeshu@lukeshu.com>
To: git@vger.kernel.org
Cc: "Avery Pennarun" <apenwarr@gmail.com>,
"Charles Bailey" <cbailey32@bloomberg.net>,
"Danny Lin" <danny0838@gmail.com>,
"David A . Greene" <greened@obbligato.org>,
"David Aguilar" <davvid@gmail.com>,
"Jakub Suder" <jakub.suder@gmail.com>,
"James Denholm" <nod.helm@gmail.com>, "Jeff King" <peff@peff.net>,
"Jonathan Nieder" <jrnieder@gmail.com>,
"Junio C Hamano" <gitster@pobox.com>,
"Nguyễn Thái Ngọc Duy" <pclouds@gmail.com>,
"Roger L Strain" <roger.strain@swri.org>,
"Techlive Zheng" <techlivezheng@gmail.com>,
"Eric Sunshine" <sunshine@sunshineco.com>,
"Ævar Arnfjörð Bjarmason" <avarab@gmail.com>,
"Luke Shumaker" <lukeshu@datawire.io>
Subject: [PATCH v2 03/30] subtree: t7900: use test-lib.sh's test_count
Date: Mon, 26 Apr 2021 11:44:58 -0600 [thread overview]
Message-ID: <20210426174525.3937858-4-lukeshu@lukeshu.com> (raw)
In-Reply-To: <20210426174525.3937858-1-lukeshu@lukeshu.com>
From: Luke Shumaker <lukeshu@datawire.io>
Use test-lib.sh's `test_count`, instead instead of having
t7900-subtree.sh do its own book-keeping with `subtree_test_count` that
has to be explicitly incremented by calling `next_test`.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
---
contrib/subtree/t/t7900-subtree.sh | 636 ++++++++++++++---------------
1 file changed, 300 insertions(+), 336 deletions(-)
diff --git a/contrib/subtree/t/t7900-subtree.sh b/contrib/subtree/t/t7900-subtree.sh
index 4b982e6c2e..a6351d9195 100755
--- a/contrib/subtree/t/t7900-subtree.sh
+++ b/contrib/subtree/t/t7900-subtree.sh
@@ -86,90 +86,79 @@ last_commit_message()
git log --pretty=format:%s -1
}
-subtree_test_count=0
-next_test() {
- subtree_test_count=$(($subtree_test_count+1))
-}
-
#
# Tests for 'git subtree add'
#
-next_test
test_expect_success 'no merge from non-existent subtree' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
test_must_fail git subtree merge --prefix="sub dir" FETCH_HEAD
)
'
-next_test
test_expect_success 'no pull from non-existent subtree' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
test_must_fail git subtree pull --prefix="sub dir" ./"sub proj" HEAD
)'
-next_test
test_expect_success 'add subproj as subtree into sub dir/ with --prefix' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD &&
check_equal "$(last_commit_message)" "Add '\''sub dir/'\'' from commit '\''$(git rev-parse FETCH_HEAD)'\''"
)
'
-next_test
test_expect_success 'add subproj as subtree into sub dir/ with --prefix and --message' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" --message="Added subproject" FETCH_HEAD &&
check_equal "$(last_commit_message)" "Added subproject"
)
'
-next_test
test_expect_success 'add subproj as subtree into sub dir/ with --prefix as -P and --message as -m' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add -P "sub dir" -m "Added subproject" FETCH_HEAD &&
check_equal "$(last_commit_message)" "Added subproject"
)
'
-next_test
test_expect_success 'add subproj as subtree into sub dir/ with --squash and --prefix and --message' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" --message="Added subproject with squash" --squash FETCH_HEAD &&
check_equal "$(last_commit_message)" "Added subproject with squash"
@@ -180,74 +169,70 @@ test_expect_success 'add subproj as subtree into sub dir/ with --squash and --pr
# Tests for 'git subtree merge'
#
-next_test
test_expect_success 'merge new subproj history into sub dir/ with --prefix' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
check_equal "$(last_commit_message)" "Merge commit '\''$(git rev-parse FETCH_HEAD)'\''"
)
'
-next_test
test_expect_success 'merge new subproj history into sub dir/ with --prefix and --message' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" --message="Merged changes from subproject" FETCH_HEAD &&
check_equal "$(last_commit_message)" "Merged changes from subproject"
)
'
-next_test
test_expect_success 'merge new subproj history into sub dir/ with --squash and --prefix and --message' '
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- subtree_test_create_repo "$subtree_test_count" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ subtree_test_create_repo "$test_count" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" --message="Merged changes from subproject using squash" --squash FETCH_HEAD &&
check_equal "$(last_commit_message)" "Merged changes from subproject using squash"
)
'
-next_test
test_expect_success 'merge the added subproj again, should do nothing' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD &&
# this shouldn not actually do anything, since FETCH_HEAD
@@ -257,7 +242,6 @@ test_expect_success 'merge the added subproj again, should do nothing' '
)
'
-next_test
test_expect_success 'merge new subproj history into subdir/ with a slash appended to the argument of --prefix' '
test_create_repo "$test_count" &&
test_create_repo "$test_count/subproj" &&
@@ -281,14 +265,13 @@ test_expect_success 'merge new subproj history into subdir/ with a slash appende
# Tests for 'git subtree split'
#
-next_test
test_expect_success 'split requires option --prefix' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD &&
echo "You must provide the --prefix option." > expected &&
@@ -301,14 +284,13 @@ test_expect_success 'split requires option --prefix' '
)
'
-next_test
test_expect_success 'split requires path given by option --prefix must exist' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD &&
echo "'\''non-existent-directory'\'' does not exist; use '\''git subtree add'\''" > expected &&
@@ -321,23 +303,22 @@ test_expect_success 'split requires path given by option --prefix must exist' '
)
'
-next_test
test_expect_success 'split sub dir/ with --rejoin' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
split_hash=$(git subtree split --prefix="sub dir" --annotate="*") &&
@@ -346,12 +327,11 @@ test_expect_success 'split sub dir/ with --rejoin' '
)
'
-next_test
test_expect_success 'split sub dir/ with --rejoin from scratch' '
- subtree_test_create_repo "$subtree_test_count" &&
- test_create_commit "$subtree_test_count" main1 &&
+ subtree_test_create_repo "$test_count" &&
+ test_create_commit "$test_count" main1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
mkdir "sub dir" &&
echo file >"sub dir"/file &&
git add "sub dir/file" &&
@@ -362,23 +342,22 @@ test_expect_success 'split sub dir/ with --rejoin from scratch' '
)
'
-next_test
test_expect_success 'split sub dir/ with --rejoin and --message' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
git subtree split --prefix="sub dir" --message="Split & rejoin" --annotate="*" --rejoin &&
@@ -386,23 +365,22 @@ test_expect_success 'split sub dir/ with --rejoin and --message' '
)
'
-next_test
test_expect_success 'split "sub dir"/ with --branch' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
split_hash=$(git subtree split --prefix="sub dir" --annotate="*") &&
@@ -411,23 +389,22 @@ test_expect_success 'split "sub dir"/ with --branch' '
)
'
-next_test
test_expect_success 'check hash of split' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
split_hash=$(git subtree split --prefix="sub dir" --annotate="*") &&
@@ -443,24 +420,23 @@ test_expect_success 'check hash of split' '
)
'
-next_test
test_expect_success 'split "sub dir"/ with --branch for an existing branch' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git branch subproj-br FETCH_HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
split_hash=$(git subtree split --prefix="sub dir" --annotate="*") &&
@@ -469,24 +445,23 @@ test_expect_success 'split "sub dir"/ with --branch for an existing branch' '
)
'
-next_test
test_expect_success 'split "sub dir"/ with --branch for an incompatible branch' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git branch init HEAD &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
test_must_fail git subtree split --prefix="sub dir" --branch init
@@ -497,46 +472,45 @@ test_expect_success 'split "sub dir"/ with --branch for an incompatible branch'
# Validity checking
#
-next_test
test_expect_success 'make sure exactly the right set of files ends up in the subproj' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
- test_create_commit "$subtree_test_count/sub proj" sub3 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ test_create_commit "$test_count/sub proj" sub3 &&
+ test_create_commit "$test_count" "sub dir"/main-sub3 &&
(
- cd "$subtree_test_count/sub proj" &&
+ cd "$test_count/sub proj" &&
git fetch .. subproj-br &&
git merge FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count/sub proj" sub4 &&
+ test_create_commit "$test_count/sub proj" sub4 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+ test_create_commit "$test_count" "sub dir"/main-sub4 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
(
- cd "$subtree_test_count/sub proj" &&
+ cd "$test_count/sub proj" &&
git fetch .. subproj-br &&
git merge FETCH_HEAD &&
@@ -547,46 +521,45 @@ test_expect_success 'make sure exactly the right set of files ends up in the sub
)
'
-next_test
test_expect_success 'make sure the subproj *only* contains commits that affect the "sub dir"' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
- test_create_commit "$subtree_test_count/sub proj" sub3 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ test_create_commit "$test_count/sub proj" sub3 &&
+ test_create_commit "$test_count" "sub dir"/main-sub3 &&
(
- cd "$subtree_test_count/sub proj" &&
+ cd "$test_count/sub proj" &&
git fetch .. subproj-br &&
git merge FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count/sub proj" sub4 &&
+ test_create_commit "$test_count/sub proj" sub4 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+ test_create_commit "$test_count" "sub dir"/main-sub4 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
(
- cd "$subtree_test_count/sub proj" &&
+ cd "$test_count/sub proj" &&
git fetch .. subproj-br &&
git merge FETCH_HEAD &&
@@ -598,51 +571,50 @@ test_expect_success 'make sure the subproj *only* contains commits that affect t
)
'
-next_test
test_expect_success 'make sure exactly the right set of files ends up in the mainline' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
- test_create_commit "$subtree_test_count/sub proj" sub3 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ test_create_commit "$test_count/sub proj" sub3 &&
+ test_create_commit "$test_count" "sub dir"/main-sub3 &&
(
- cd "$subtree_test_count/sub proj" &&
+ cd "$test_count/sub proj" &&
git fetch .. subproj-br &&
git merge FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count/sub proj" sub4 &&
+ test_create_commit "$test_count/sub proj" sub4 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+ test_create_commit "$test_count" "sub dir"/main-sub4 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
(
- cd "$subtree_test_count/sub proj" &&
+ cd "$test_count/sub proj" &&
git fetch .. subproj-br &&
git merge FETCH_HEAD
) &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree pull --prefix="sub dir" ./"sub proj" HEAD &&
test_write_lines main1 main2 >chkm &&
@@ -657,52 +629,51 @@ test_expect_success 'make sure exactly the right set of files ends up in the mai
)
'
-next_test
test_expect_success 'make sure each filename changed exactly once in the entire history' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git config log.date relative &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
- test_create_commit "$subtree_test_count/sub proj" sub3 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ test_create_commit "$test_count/sub proj" sub3 &&
+ test_create_commit "$test_count" "sub dir"/main-sub3 &&
(
- cd "$subtree_test_count/sub proj" &&
+ cd "$test_count/sub proj" &&
git fetch .. subproj-br &&
git merge FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count/sub proj" sub4 &&
+ test_create_commit "$test_count/sub proj" sub4 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+ test_create_commit "$test_count" "sub dir"/main-sub4 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
(
- cd "$subtree_test_count/sub proj" &&
+ cd "$test_count/sub proj" &&
git fetch .. subproj-br &&
git merge FETCH_HEAD
) &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree pull --prefix="sub dir" ./"sub proj" HEAD &&
test_write_lines main1 main2 >chkm &&
@@ -723,101 +694,99 @@ test_expect_success 'make sure each filename changed exactly once in the entire
)
'
-next_test
test_expect_success 'make sure the --rejoin commits never make it into subproj' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
- test_create_commit "$subtree_test_count/sub proj" sub3 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ test_create_commit "$test_count/sub proj" sub3 &&
+ test_create_commit "$test_count" "sub dir"/main-sub3 &&
(
- cd "$subtree_test_count/sub proj" &&
+ cd "$test_count/sub proj" &&
git fetch .. subproj-br &&
git merge FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count/sub proj" sub4 &&
+ test_create_commit "$test_count/sub proj" sub4 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+ test_create_commit "$test_count" "sub dir"/main-sub4 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
(
- cd "$subtree_test_count/sub proj" &&
+ cd "$test_count/sub proj" &&
git fetch .. subproj-br &&
git merge FETCH_HEAD
) &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree pull --prefix="sub dir" ./"sub proj" HEAD &&
check_equal "$(git log --pretty=format:"%s" HEAD^2 | grep -i split)" ""
)
'
-next_test
test_expect_success 'make sure no "git subtree" tagged commits make it into subproj' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
- test_create_commit "$subtree_test_count/sub proj" sub3 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ test_create_commit "$test_count/sub proj" sub3 &&
+ test_create_commit "$test_count" "sub dir"/main-sub3 &&
(
- cd "$subtree_test_count/sub proj" &&
+ cd "$test_count/sub proj" &&
git fetch .. subproj-br &&
git merge FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count/sub proj" sub4 &&
+ test_create_commit "$test_count/sub proj" sub4 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+ test_create_commit "$test_count" "sub dir"/main-sub4 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
) &&
(
- cd "$subtree_test_count/sub proj" &&
+ cd "$test_count/sub proj" &&
git fetch .. subproj-br &&
git merge FETCH_HEAD
) &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree pull --prefix="sub dir" ./"sub proj" HEAD &&
# They are meaningless to subproj since one side of the merge refers to the mainline
@@ -829,27 +798,26 @@ test_expect_success 'make sure no "git subtree" tagged commits make it into subp
# A new set of tests
#
-next_test
test_expect_success 'make sure "git subtree split" find the correct parent' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git branch subproj-ref FETCH_HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --branch subproj-br &&
# at this point, the new commit parent should be subproj-ref, if it is
@@ -860,32 +828,31 @@ test_expect_success 'make sure "git subtree split" find the correct parent' '
)
'
-next_test
test_expect_success 'split a new subtree without --onto option' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --branch subproj-br
) &&
- mkdir "$subtree_test_count"/"sub dir2" &&
- test_create_commit "$subtree_test_count" "sub dir2"/main-sub2 &&
+ mkdir "$test_count"/"sub dir2" &&
+ test_create_commit "$test_count" "sub dir2"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
# also test that we still can split out an entirely new subtree
# if the parent of the first commit in the tree is not empty,
@@ -895,33 +862,32 @@ test_expect_success 'split a new subtree without --onto option' '
)
'
-next_test
test_expect_success 'verify one file change per commit' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git branch sub1 FETCH_HEAD &&
git subtree add --prefix="sub dir" sub1
) &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir" --branch subproj-br
) &&
- mkdir "$subtree_test_count"/"sub dir2" &&
- test_create_commit "$subtree_test_count" "sub dir2"/main-sub2 &&
+ mkdir "$test_count"/"sub dir2" &&
+ test_create_commit "$test_count" "sub dir2"/main-sub2 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree split --prefix="sub dir2" --branch subproj2-br &&
x= &&
@@ -939,31 +905,30 @@ test_expect_success 'verify one file change per commit' '
)
'
-next_test
test_expect_success 'push split to subproj' '
- subtree_test_create_repo "$subtree_test_count" &&
- subtree_test_create_repo "$subtree_test_count/sub proj" &&
- test_create_commit "$subtree_test_count" main1 &&
- test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ subtree_test_create_repo "$test_count" &&
+ subtree_test_create_repo "$test_count/sub proj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/sub proj" sub1 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git fetch ./"sub proj" HEAD &&
git subtree add --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
- test_create_commit "$subtree_test_count" main2 &&
- test_create_commit "$subtree_test_count/sub proj" sub2 &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$test_count" main2 &&
+ test_create_commit "$test_count/sub proj" sub2 &&
+ test_create_commit "$test_count" "sub dir"/main-sub2 &&
(
- cd $subtree_test_count/"sub proj" &&
+ cd $test_count/"sub proj" &&
git branch sub-branch-1 &&
cd .. &&
git fetch ./"sub proj" HEAD &&
git subtree merge --prefix="sub dir" FETCH_HEAD
) &&
- test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ test_create_commit "$test_count" "sub dir"/main-sub3 &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git subtree push ./"sub proj" --prefix "sub dir" sub-branch-1 &&
cd ./"sub proj" &&
git checkout sub-branch-1 &&
@@ -991,38 +956,37 @@ test_expect_success 'push split to subproj' '
# set of commits.
#
-next_test
test_expect_success 'subtree descendant check' '
- subtree_test_create_repo "$subtree_test_count" &&
- defaultBranch=$(sed "s,ref: refs/heads/,," "$subtree_test_count/.git/HEAD") &&
- test_create_commit "$subtree_test_count" folder_subtree/a &&
+ subtree_test_create_repo "$test_count" &&
+ defaultBranch=$(sed "s,ref: refs/heads/,," "$test_count/.git/HEAD") &&
+ test_create_commit "$test_count" folder_subtree/a &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git branch branch
) &&
- test_create_commit "$subtree_test_count" folder_subtree/0 &&
- test_create_commit "$subtree_test_count" folder_subtree/b &&
- cherry=$(cd "$subtree_test_count"; git rev-parse HEAD) &&
+ test_create_commit "$test_count" folder_subtree/0 &&
+ test_create_commit "$test_count" folder_subtree/b &&
+ cherry=$(cd "$test_count"; git rev-parse HEAD) &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git checkout branch
) &&
- test_create_commit "$subtree_test_count" commit_on_branch &&
+ test_create_commit "$test_count" commit_on_branch &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git cherry-pick $cherry &&
git checkout $defaultBranch &&
git merge -m "merge should be kept on subtree" branch &&
git branch no_subtree_work_branch
) &&
- test_create_commit "$subtree_test_count" folder_subtree/d &&
+ test_create_commit "$test_count" folder_subtree/d &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git checkout no_subtree_work_branch
) &&
- test_create_commit "$subtree_test_count" not_a_subtree_change &&
+ test_create_commit "$test_count" not_a_subtree_change &&
(
- cd "$subtree_test_count" &&
+ cd "$test_count" &&
git checkout $defaultBranch &&
git merge -m "merge should be skipped on subtree" no_subtree_work_branch &&
--
2.31.1
next prev parent reply other threads:[~2021-04-26 17:47 UTC|newest]
Thread overview: 144+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-23 19:42 [PATCH 00/30] subtree: clean up, improve UX Luke Shumaker
2021-04-23 19:42 ` [PATCH 01/30] .gitignore: Ignore /git-subtree Luke Shumaker
2021-04-23 19:42 ` [PATCH 02/30] subtree: t7900: update for having the default branch name be 'main' Luke Shumaker
2021-04-23 19:42 ` [PATCH 03/30] subtree: t7900: use test-lib.sh's test_count Luke Shumaker
2021-04-23 19:42 ` [PATCH 04/30] subtree: t7900: use consistent formatting Luke Shumaker
2021-04-23 21:51 ` Eric Sunshine
2021-04-23 22:54 ` Luke Shumaker
2021-04-27 7:17 ` Junio C Hamano
2021-04-27 20:41 ` Luke Shumaker
2021-04-28 4:33 ` Junio C Hamano
2021-04-23 19:42 ` [PATCH 05/30] subtree: t7900: comment subtree_test_create_repo Luke Shumaker
2021-04-23 19:42 ` [PATCH 06/30] subtree: t7900: use 'test' for string equality Luke Shumaker
2021-04-23 19:42 ` [PATCH 07/30] subtree: t7900: delete some dead code Luke Shumaker
2021-04-23 19:42 ` [PATCH 08/30] subtree: t7900: fix 'verify one file change per commit' Luke Shumaker
2021-04-23 19:42 ` [PATCH 09/30] subtree: t7900: rename last_commit_message to last_commit_subject Luke Shumaker
2021-04-23 19:42 ` [PATCH 10/30] subtree: t7900: add a test for the -h flag Luke Shumaker
2021-04-23 19:42 ` [PATCH 11/30] subtree: t7900: add porcelain tests for 'pull' and 'push' Luke Shumaker
2021-04-23 20:19 ` Eric Sunshine
2021-04-23 22:27 ` Luke Shumaker
2021-04-23 19:42 ` [PATCH 12/30] subtree: don't have loose code outside of a function Luke Shumaker
2021-04-23 20:05 ` Luke Shumaker
2021-04-23 20:23 ` Eric Sunshine
2021-04-23 22:43 ` Luke Shumaker
2021-04-23 23:11 ` Eric Sunshine
2021-04-23 23:37 ` Luke Shumaker
2021-04-23 19:42 ` [PATCH 13/30] subtree: more consistent error propagation Luke Shumaker
2021-04-23 19:42 ` [PATCH 14/30] subtree: drop support for git < 1.7 Luke Shumaker
2021-04-23 20:07 ` Luke Shumaker
2021-04-23 20:31 ` Eric Sunshine
2021-04-23 23:28 ` Luke Shumaker
2021-04-23 23:50 ` Eric Sunshine
2021-04-24 0:20 ` Luke Shumaker
2021-04-23 19:42 ` [PATCH 15/30] subtree: use `git merge-base --is-ancestor` Luke Shumaker
2021-04-23 19:42 ` [PATCH 16/30] subtree: use git-sh-setup's `say` Luke Shumaker
2021-04-23 19:42 ` [PATCH 17/30] subtree: use more explicit variable names for cmdline args Luke Shumaker
2021-04-23 19:42 ` [PATCH 18/30] subtree: use $* instead of $@ as appropriate Luke Shumaker
2021-04-23 20:40 ` Eric Sunshine
2021-04-23 23:50 ` Luke Shumaker
2021-04-24 5:18 ` Eric Sunshine
2021-04-23 19:42 ` [PATCH 19/30] subtree: give `$(git --exec-path)` precedence over `$PATH` Luke Shumaker
2021-04-26 8:27 ` =?utf-8?B?w4Z2YXIgQXJuZmrDtnLDsA==?= Bjarmason
2021-04-23 19:42 ` [PATCH 20/30] subtree: use "^{commit}" instead of "^0" Luke Shumaker
2021-04-26 7:43 ` Ævar Arnfjörð Bjarmason
2021-04-23 19:42 ` [PATCH 21/30] subtree: parse revs in individual cmd_ functions Luke Shumaker
2021-04-23 19:42 ` [PATCH 22/30] subtree: remove duplicate check Luke Shumaker
2021-04-23 19:42 ` [PATCH 23/30] subtree: add comments and sanity checks Luke Shumaker
2021-04-23 20:58 ` Eric Sunshine
2021-04-23 23:58 ` Luke Shumaker
2021-04-23 19:42 ` [PATCH 24/30] subtree: don't let debug and progress output clash Luke Shumaker
2021-04-23 21:07 ` Eric Sunshine
2021-04-24 0:44 ` Luke Shumaker
2021-04-24 4:54 ` Eric Sunshine
2021-04-23 19:42 ` [PATCH 25/30] subtree: have $indent actually affect indentation Luke Shumaker
2021-04-23 19:42 ` [PATCH 26/30] subtree: give the docs a once-over Luke Shumaker
2021-04-23 19:42 ` [PATCH 27/30] subtree: allow --squash to be used with --rejoin Luke Shumaker
2021-04-24 5:50 ` Eric Sunshine
2021-04-25 0:04 ` Luke Shumaker
2021-04-23 19:42 ` [PATCH 28/30] subtree: allow 'split' flags to be passed to 'push' Luke Shumaker
2021-04-23 19:42 ` [PATCH 29/30] subtree: push: allow specifying a local rev other than HEAD Luke Shumaker
2021-04-23 19:42 ` [PATCH 30/30] subtree: be stricter about validating flags Luke Shumaker
2021-04-25 2:55 ` Danny Lin
2021-04-26 17:35 ` Luke Shumaker
2021-04-23 20:12 ` [PATCH 00/30] subtree: clean up, improve UX Luke Shumaker
2021-04-26 7:55 ` =?utf-8?B?w4Z2YXIgQXJuZmrDtnLDsA==?= Bjarmason
2021-04-27 7:27 ` Junio C Hamano
2021-04-26 17:44 ` [PATCH v2 " Luke Shumaker
2021-04-26 17:44 ` [PATCH v2 01/30] .gitignore: Ignore /git-subtree Luke Shumaker
2021-04-26 17:44 ` [PATCH v2 02/30] subtree: t7900: update for having the default branch name be 'main' Luke Shumaker
2021-04-26 17:44 ` Luke Shumaker [this message]
2021-04-26 17:44 ` [PATCH v2 04/30] subtree: t7900: use consistent formatting Luke Shumaker
2021-04-26 19:57 ` Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 05/30] subtree: t7900: comment subtree_test_create_repo Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 06/30] subtree: t7900: use 'test' for string equality Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 07/30] subtree: t7900: delete some dead code Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 08/30] subtree: t7900: fix 'verify one file change per commit' Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 09/30] subtree: t7900: rename last_commit_message to last_commit_subject Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 10/30] subtree: t7900: add a test for the -h flag Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 11/30] subtree: t7900: add porcelain tests for 'pull' and 'push' Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 12/30] subtree: don't have loose code outside of a function Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 13/30] subtree: more consistent error propagation Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 14/30] subtree: drop support for git < 1.7 Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 15/30] subtree: use `git merge-base --is-ancestor` Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 16/30] subtree: use git-sh-setup's `say` Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 17/30] subtree: use more explicit variable names for cmdline args Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 18/30] subtree: use "$*" instead of "$@" as appropriate Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 19/30] subtree: Don't fuss with PATH Luke Shumaker
2021-04-26 23:16 ` Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 20/30] subtree: use "^{commit}" instead of "^0" Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 21/30] subtree: parse revs in individual cmd_ functions Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 22/30] subtree: remove duplicate check Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 23/30] subtree: add comments and sanity checks Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 24/30] subtree: don't let debug and progress output clash Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 25/30] subtree: have $indent actually affect indentation Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 26/30] subtree: give the docs a once-over Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 27/30] subtree: allow --squash to be used with --rejoin Luke Shumaker
2021-04-26 19:58 ` Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 28/30] subtree: allow 'split' flags to be passed to 'push' Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 29/30] subtree: push: allow specifying a local rev other than HEAD Luke Shumaker
2021-04-26 17:45 ` [PATCH v2 30/30] subtree: be stricter about validating flags Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 00/30] subtree: clean up, improve UX Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 01/30] .gitignore: Ignore /git-subtree Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 02/30] subtree: t7900: update for having the default branch name be 'main' Luke Shumaker
2021-04-30 9:38 ` Ævar Arnfjörð Bjarmason
2021-04-30 16:07 ` Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 03/30] subtree: t7900: use test-lib.sh's test_count Luke Shumaker
2021-04-30 9:45 ` Ævar Arnfjörð Bjarmason
2021-04-30 16:10 ` Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 04/30] subtree: t7900: use consistent formatting Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 05/30] subtree: t7900: comment subtree_test_create_repo Luke Shumaker
2021-04-30 9:48 ` Ævar Arnfjörð Bjarmason
2021-04-30 16:13 ` Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 06/30] subtree: t7900: use 'test' for string equality Luke Shumaker
2021-04-30 9:55 ` Ævar Arnfjörð Bjarmason
2021-04-30 16:33 ` Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 07/30] subtree: t7900: delete some dead code Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 08/30] subtree: t7900: fix 'verify one file change per commit' Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 09/30] subtree: t7900: rename last_commit_message to last_commit_subject Luke Shumaker
2021-04-30 9:59 ` Ævar Arnfjörð Bjarmason
2021-04-27 21:17 ` [PATCH v3 10/30] subtree: t7900: add a test for the -h flag Luke Shumaker
2021-04-30 10:01 ` Ævar Arnfjörð Bjarmason
2021-04-30 16:40 ` Luke Shumaker
2021-04-30 12:22 ` Bagas Sanjaya
2021-04-30 16:48 ` Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 11/30] subtree: t7900: add porcelain tests for 'pull' and 'push' Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 12/30] subtree: don't have loose code outside of a function Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 13/30] subtree: more consistent error propagation Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 14/30] subtree: drop support for git < 1.7 Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 15/30] subtree: use `git merge-base --is-ancestor` Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 16/30] subtree: use git-sh-setup's `say` Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 17/30] subtree: use more explicit variable names for cmdline args Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 18/30] subtree: use "$*" instead of "$@" as appropriate Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 19/30] subtree: don't fuss with PATH Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 20/30] subtree: use "^{commit}" instead of "^0" Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 21/30] subtree: parse revs in individual cmd_ functions Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 22/30] subtree: remove duplicate check Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 23/30] subtree: add comments and sanity checks Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 24/30] subtree: don't let debug and progress output clash Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 25/30] subtree: have $indent actually affect indentation Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 26/30] subtree: give the docs a once-over Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 27/30] subtree: allow --squash to be used with --rejoin Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 28/30] subtree: allow 'split' flags to be passed to 'push' Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 29/30] subtree: push: allow specifying a local rev other than HEAD Luke Shumaker
2021-04-27 21:17 ` [PATCH v3 30/30] subtree: be stricter about validating flags Luke Shumaker
[not found] ` <CAAgkN4cKUSPKpwuaLG-vR5Z7WFUZ81QXuRcsX-10obaRBAvwBA@mail.gmail.com>
2021-04-28 0:24 ` Luke Shumaker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210426174525.3937858-4-lukeshu@lukeshu.com \
--to=lukeshu@lukeshu.com \
--cc=apenwarr@gmail.com \
--cc=avarab@gmail.com \
--cc=cbailey32@bloomberg.net \
--cc=danny0838@gmail.com \
--cc=davvid@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=greened@obbligato.org \
--cc=jakub.suder@gmail.com \
--cc=jrnieder@gmail.com \
--cc=lukeshu@datawire.io \
--cc=nod.helm@gmail.com \
--cc=pclouds@gmail.com \
--cc=peff@peff.net \
--cc=roger.strain@swri.org \
--cc=sunshine@sunshineco.com \
--cc=techlivezheng@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.