From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
Bart van Assche <bvanassche@acm.org>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 23/40] nsp32: whitespace cleanup
Date: Tue, 27 Apr 2021 10:30:29 +0200 [thread overview]
Message-ID: <20210427083046.31620-24-hare@suse.de> (raw)
In-Reply-To: <20210427083046.31620-1-hare@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/nsp32.c | 415 +++++++++++++++++++++++--------------------
1 file changed, 221 insertions(+), 194 deletions(-)
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 134bbd2d8b66..6d29908017f0 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -176,38 +176,40 @@ static nsp32_sync_table nsp32_sync_table_pci[] = {
* function declaration
*/
/* module entry point */
-static int nsp32_probe (struct pci_dev *, const struct pci_device_id *);
-static void nsp32_remove(struct pci_dev *);
+static int nsp32_probe (struct pci_dev *, const struct pci_device_id *);
+static void nsp32_remove(struct pci_dev *);
static int __init init_nsp32 (void);
static void __exit exit_nsp32 (void);
/* struct struct scsi_host_template */
-static int nsp32_show_info (struct seq_file *, struct Scsi_Host *);
+static int nsp32_show_info (struct seq_file *, struct Scsi_Host *);
-static int nsp32_detect (struct pci_dev *pdev);
-static int nsp32_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
-static const char *nsp32_info (struct Scsi_Host *);
-static int nsp32_release (struct Scsi_Host *);
+static int nsp32_detect (struct pci_dev *pdev);
+static int nsp32_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
+static const char *nsp32_info (struct Scsi_Host *);
+static int nsp32_release (struct Scsi_Host *);
/* SCSI error handler */
-static int nsp32_eh_abort (struct scsi_cmnd *);
-static int nsp32_eh_host_reset(struct scsi_cmnd *);
+static int nsp32_eh_abort (struct scsi_cmnd *);
+static int nsp32_eh_host_reset(struct scsi_cmnd *);
/* generate SCSI message */
static void nsp32_build_identify(struct scsi_cmnd *);
static void nsp32_build_nop (struct scsi_cmnd *);
static void nsp32_build_reject (struct scsi_cmnd *);
-static void nsp32_build_sdtr (struct scsi_cmnd *, unsigned char, unsigned char);
+static void nsp32_build_sdtr (struct scsi_cmnd *, unsigned char,
+ unsigned char);
/* SCSI message handler */
static int nsp32_busfree_occur(struct scsi_cmnd *, unsigned short);
static void nsp32_msgout_occur (struct scsi_cmnd *);
-static void nsp32_msgin_occur (struct scsi_cmnd *, unsigned long, unsigned short);
+static void nsp32_msgin_occur (struct scsi_cmnd *, unsigned long,
+ unsigned short);
static int nsp32_setup_sg_table (struct scsi_cmnd *);
static int nsp32_selection_autopara(struct scsi_cmnd *);
static int nsp32_selection_autoscsi(struct scsi_cmnd *);
-static void nsp32_scsi_done (struct scsi_cmnd *);
+static void nsp32_scsi_done (struct scsi_cmnd *);
static int nsp32_arbitration (struct scsi_cmnd *, unsigned int);
static int nsp32_reselection (struct scsi_cmnd *, unsigned char);
static void nsp32_adjust_busfree (struct scsi_cmnd *, unsigned int);
@@ -215,10 +217,13 @@ static void nsp32_restart_autoscsi (struct scsi_cmnd *, unsigned short);
/* SCSI SDTR */
static void nsp32_analyze_sdtr (struct scsi_cmnd *);
-static int nsp32_search_period_entry(nsp32_hw_data *, nsp32_target *, unsigned char);
-static void nsp32_set_async (nsp32_hw_data *, nsp32_target *);
-static void nsp32_set_max_sync (nsp32_hw_data *, nsp32_target *, unsigned char *, unsigned char *);
-static void nsp32_set_sync_entry (nsp32_hw_data *, nsp32_target *, int, unsigned char);
+static int nsp32_search_period_entry(nsp32_hw_data *, nsp32_target *,
+ unsigned char);
+static void nsp32_set_async (nsp32_hw_data *, nsp32_target *);
+static void nsp32_set_max_sync (nsp32_hw_data *, nsp32_target *,
+ unsigned char *, unsigned char *);
+static void nsp32_set_sync_entry (nsp32_hw_data *, nsp32_target *,
+ int, unsigned char);
/* SCSI bus status handler */
static void nsp32_wait_req (nsp32_hw_data *, int);
@@ -234,16 +239,16 @@ static irqreturn_t do_nsp32_isr(int, void *);
static int nsp32hw_init(nsp32_hw_data *);
/* EEPROM handler */
-static int nsp32_getprom_param (nsp32_hw_data *);
-static int nsp32_getprom_at24 (nsp32_hw_data *);
-static int nsp32_getprom_c16 (nsp32_hw_data *);
-static void nsp32_prom_start (nsp32_hw_data *);
-static void nsp32_prom_stop (nsp32_hw_data *);
-static int nsp32_prom_read (nsp32_hw_data *, int);
-static int nsp32_prom_read_bit (nsp32_hw_data *);
-static void nsp32_prom_write_bit(nsp32_hw_data *, int);
-static void nsp32_prom_set (nsp32_hw_data *, int, int);
-static int nsp32_prom_get (nsp32_hw_data *, int);
+static int nsp32_getprom_param (nsp32_hw_data *);
+static int nsp32_getprom_at24 (nsp32_hw_data *);
+static int nsp32_getprom_c16 (nsp32_hw_data *);
+static void nsp32_prom_start (nsp32_hw_data *);
+static void nsp32_prom_stop (nsp32_hw_data *);
+static int nsp32_prom_read (nsp32_hw_data *, int);
+static int nsp32_prom_read_bit (nsp32_hw_data *);
+static void nsp32_prom_write_bit(nsp32_hw_data *, int);
+static void nsp32_prom_set (nsp32_hw_data *, int, int);
+static int nsp32_prom_get (nsp32_hw_data *, int);
/* debug/warning/info message */
static void nsp32_message (const char *, int, char *, char *, ...);
@@ -356,8 +361,8 @@ static void nsp32_dmessage(const char *func, int line, int mask, char *fmt, ...)
static void nsp32_build_identify(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
- int pos = data->msgout_len;
- int mode = FALSE;
+ int pos = data->msgout_len;
+ int mode = FALSE;
/* XXX: Auto DiscPriv detection is progressing... */
if (disc_priv == 0) {
@@ -377,13 +382,13 @@ static void nsp32_build_sdtr(struct scsi_cmnd *SCpnt,
unsigned char offset)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
- int pos = data->msgout_len;
+ int pos = data->msgout_len;
data->msgoutbuf[pos] = EXTENDED_MESSAGE; pos++;
data->msgoutbuf[pos] = EXTENDED_SDTR_LEN; pos++;
data->msgoutbuf[pos] = EXTENDED_SDTR; pos++;
- data->msgoutbuf[pos] = period; pos++;
- data->msgoutbuf[pos] = offset; pos++;
+ data->msgoutbuf[pos] = period; pos++;
+ data->msgoutbuf[pos] = offset; pos++;
data->msgout_len = pos;
}
@@ -394,7 +399,7 @@ static void nsp32_build_sdtr(struct scsi_cmnd *SCpnt,
static void nsp32_build_nop(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
- int pos = data->msgout_len;
+ int pos = data->msgout_len;
if (pos != 0) {
nsp32_msg(KERN_WARNING,
@@ -412,12 +417,12 @@ static void nsp32_build_nop(struct scsi_cmnd *SCpnt)
static void nsp32_build_reject(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
- int pos = data->msgout_len;
+ int pos = data->msgout_len;
data->msgoutbuf[pos] = MESSAGE_REJECT; pos++;
data->msgout_len = pos;
}
-
+
/*
* timer
*/
@@ -450,7 +455,7 @@ static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)
unsigned char phase;
int i, ret;
unsigned int msgout;
- u16_le s;
+ u16_le s;
nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "in");
@@ -482,7 +487,7 @@ static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)
* the sending order of the message is:
* MCNT 3: MSG#0 -> MSG#1 -> MSG#2
* MCNT 2: MSG#1 -> MSG#2
- * MCNT 1: MSG#2
+ * MCNT 1: MSG#2
*/
msgout >>= 8;
msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24);
@@ -494,7 +499,8 @@ static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)
msgout = 0;
}
- // nsp_dbg(NSP32_DEBUG_AUTOSCSI, "sel time out=0x%x\n", nsp32_read2(base, SEL_TIME_OUT));
+ // nsp_dbg(NSP32_DEBUG_AUTOSCSI, "sel time out=0x%x\n",
+ // nsp32_read2(base, SEL_TIME_OUT));
// nsp32_write2(base, SEL_TIME_OUT, SEL_TIMEOUT_TIME);
/*
@@ -520,10 +526,10 @@ static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)
/* command control */
param->command_control = cpu_to_le16(CLEAR_CDB_FIFO_POINTER |
- AUTOSCSI_START |
- AUTO_MSGIN_00_OR_04 |
- AUTO_MSGIN_02 |
- AUTO_ATN );
+ AUTOSCSI_START |
+ AUTO_MSGIN_00_OR_04 |
+ AUTO_MSGIN_02 |
+ AUTO_ATN );
/* transfer control */
@@ -555,9 +561,9 @@ static int nsp32_selection_autopara(struct scsi_cmnd *SCpnt)
/*
* transfer parameter to ASIC
*/
- nsp32_write4(base, SGT_ADR, data->auto_paddr);
- nsp32_write2(base, COMMAND_CONTROL, CLEAR_CDB_FIFO_POINTER |
- AUTO_PARAMETER );
+ nsp32_write4(base, SGT_ADR, data->auto_paddr);
+ nsp32_write2(base, COMMAND_CONTROL,
+ CLEAR_CDB_FIFO_POINTER | AUTO_PARAMETER );
/*
* Check arbitration
@@ -599,7 +605,7 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)
SCpnt->result = DID_BUS_BUSY << 16;
status = 1;
goto out;
- }
+ }
/*
* clear execph
@@ -616,13 +622,14 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)
*/
for (i = 0; i < SCpnt->cmd_len; i++) {
nsp32_write1(base, COMMAND_DATA, SCpnt->cmnd[i]);
- }
+ }
nsp32_dbg(NSP32_DEBUG_CDB_CONTENTS, "CDB[0]=[0x%x]", SCpnt->cmnd[0]);
/*
* set SCSIOUT LATCH(initiator)/TARGET(target) (OR-ed) ID
*/
- nsp32_write1(base, SCSI_OUT_LATCH_TARGET_ID, BIT(host_id) | BIT(target));
+ nsp32_write1(base, SCSI_OUT_LATCH_TARGET_ID,
+ BIT(host_id) | BIT(target));
/*
* set SCSI MSGOUT REG
@@ -642,7 +649,7 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)
* the sending order of the message is:
* MCNT 3: MSG#0 -> MSG#1 -> MSG#2
* MCNT 2: MSG#1 -> MSG#2
- * MCNT 1: MSG#2
+ * MCNT 1: MSG#2
*/
msgout >>= 8;
msgout |= ((unsigned int)(data->msgoutbuf[i]) << 24);
@@ -662,7 +669,7 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)
/*
* set SREQ hazard killer sampling rate
- *
+ *
* TODO: sample_rate (BASE+0F) is 0 when internal clock = 40MHz.
* check other internal clock!
*/
@@ -687,7 +694,8 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)
nsp32_dbg(NSP32_DEBUG_AUTOSCSI,
"syncreg=0x%x, ackwidth=0x%x, sgtpaddr=0x%x, id=0x%x",
nsp32_read1(base, SYNC_REG), nsp32_read1(base, ACK_WIDTH),
- nsp32_read4(base, SGT_ADR), nsp32_read1(base, SCSI_OUT_LATCH_TARGET_ID));
+ nsp32_read4(base, SGT_ADR),
+ nsp32_read1(base, SCSI_OUT_LATCH_TARGET_ID));
nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "msgout_len=%d, msgout=0x%x",
data->msgout_len, msgout);
@@ -716,10 +724,10 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)
* start AUTO SCSI, kick off arbitration
*/
command = (CLEAR_CDB_FIFO_POINTER |
- AUTOSCSI_START |
+ AUTOSCSI_START |
AUTO_MSGIN_00_OR_04 |
- AUTO_MSGIN_02 |
- AUTO_ATN );
+ AUTO_MSGIN_02 |
+ AUTO_ATN);
nsp32_write2(base, COMMAND_CONTROL, command);
/*
@@ -739,9 +747,9 @@ static int nsp32_selection_autoscsi(struct scsi_cmnd *SCpnt)
/*
* Arbitration Status Check
- *
+ *
* Note: Arbitration counter is waited during ARBIT_GO is not lifting.
- * Using udelay(1) consumes CPU time and system time, but
+ * Using udelay(1) consumes CPU time and system time, but
* arbitration delay time is defined minimal 2.4us in SCSI
* specification, thus udelay works as coarse grained wait timer.
*/
@@ -776,7 +784,7 @@ static int nsp32_arbitration(struct scsi_cmnd *SCpnt, unsigned int base)
nsp32_dbg(NSP32_DEBUG_AUTOSCSI, "arbit timeout");
SCpnt->result = DID_NO_CONNECT << 16;
status = FALSE;
- }
+ }
/*
* clear Arbit
@@ -822,7 +830,8 @@ static int nsp32_reselection(struct scsi_cmnd *SCpnt, unsigned char newlun)
* or current nexus is not existed, unexpected
* reselection is occurred. Send reject message.
*/
- if (newid >= ARRAY_SIZE(data->lunt) || newlun >= ARRAY_SIZE(data->lunt[0])) {
+ if (newid >= ARRAY_SIZE(data->lunt) ||
+ newlun >= ARRAY_SIZE(data->lunt[0])) {
nsp32_msg(KERN_WARNING, "unknown id/lun");
return FALSE;
} else if(data->lunt[newid][newlun].SCpnt == NULL) {
@@ -876,7 +885,8 @@ static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt)
if (le32_to_cpu(sgt[i].len) > 0x10000) {
nsp32_msg(KERN_ERR,
- "can't transfer over 64KB at a time, size=0x%x", le32_to_cpu(sgt[i].len));
+ "can't transfer over 64KB at a time, "
+ "size=0x%lx", le32_to_cpu(sgt[i].len));
return FALSE;
}
nsp32_dbg(NSP32_DEBUG_SGLIST,
@@ -894,7 +904,8 @@ static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt)
return TRUE;
}
-static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt,
+ void (*done)(struct scsi_cmnd *))
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
nsp32_target *target;
@@ -904,8 +915,9 @@ static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct s
nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND,
"enter. target: 0x%x LUN: 0x%llx cmnd: 0x%x cmndlen: 0x%x "
"use_sg: 0x%x reqbuf: 0x%lx reqlen: 0x%x",
- SCpnt->device->id, SCpnt->device->lun, SCpnt->cmnd[0], SCpnt->cmd_len,
- scsi_sg_count(SCpnt), scsi_sglist(SCpnt), scsi_bufflen(SCpnt));
+ SCpnt->device->id, SCpnt->device->lun, SCpnt->cmnd[0],
+ SCpnt->cmd_len, scsi_sg_count(SCpnt), scsi_sglist(SCpnt),
+ scsi_bufflen(SCpnt));
if (data->CurrentSC != NULL) {
nsp32_msg(KERN_ERR, "Currentsc != NULL. Cancel this command request");
@@ -966,7 +978,7 @@ static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct s
/* Build IDENTIFY */
nsp32_build_identify(SCpnt);
- /*
+ /*
* If target is the first time to transfer after the reset
* (target don't have SDTR_DONE and SDTR_INITIATOR), sync
* message SDTR is needed to do synchronous transfer.
@@ -1051,9 +1063,9 @@ static int nsp32hw_init(nsp32_hw_data *data)
nsp32_index_write2(base, CFG_LATE_CACHE, lc_reg & 0xffff);
}
- nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
- nsp32_write2(base, TRANSFER_CONTROL, 0);
- nsp32_write4(base, BM_CNT, 0);
+ nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
+ nsp32_write2(base, TRANSFER_CONTROL, 0);
+ nsp32_write4(base, BM_CNT, 0);
nsp32_write2(base, SCSI_EXECUTE_PHASE, 0);
do {
@@ -1081,12 +1093,13 @@ static int nsp32hw_init(nsp32_hw_data *data)
nsp32_index_read1(base, FIFO_EMPTY_SHLD_COUNT));
nsp32_index_write1(base, CLOCK_DIV, data->clock);
- nsp32_index_write1(base, BM_CYCLE, MEMRD_CMD1 | SGT_AUTO_PARA_MEMED_CMD);
+ nsp32_index_write1(base, BM_CYCLE,
+ MEMRD_CMD1 | SGT_AUTO_PARA_MEMED_CMD);
nsp32_write1(base, PARITY_CONTROL, 0); /* parity check is disable */
/*
* initialize MISC_WRRD register
- *
+ *
* Note: Designated parameters is obeyed as following:
* MISC_SCSI_DIRECTION_DETECTOR_SELECT: It must be set.
* MISC_MASTER_TERMINATION_SELECT: It must be set.
@@ -1101,10 +1114,10 @@ static int nsp32hw_init(nsp32_hw_data *data)
*/
nsp32_index_write2(base, MISC_WR,
(SCSI_DIRECTION_DETECTOR_SELECT |
- DELAYED_BMSTART |
- MASTER_TERMINATION_SELECT |
- BMREQ_NEGATE_TIMING_SEL |
- AUTOSEL_TIMING_SEL |
+ DELAYED_BMSTART |
+ MASTER_TERMINATION_SELECT |
+ BMREQ_NEGATE_TIMING_SEL |
+ AUTOSEL_TIMING_SEL |
BMSTOP_CHANGE2_NONDATA_PHASE));
nsp32_index_write1(base, TERM_PWR_CONTROL, 0);
@@ -1125,15 +1138,16 @@ static int nsp32hw_init(nsp32_hw_data *data)
* enable to select designated IRQ (except for
* IRQSELECT_SERR, IRQSELECT_PERR, IRQSELECT_BMCNTERR)
*/
- nsp32_index_write2(base, IRQ_SELECT, IRQSELECT_TIMER_IRQ |
- IRQSELECT_SCSIRESET_IRQ |
- IRQSELECT_FIFO_SHLD_IRQ |
- IRQSELECT_RESELECT_IRQ |
- IRQSELECT_PHASE_CHANGE_IRQ |
- IRQSELECT_AUTO_SCSI_SEQ_IRQ |
- // IRQSELECT_BMCNTERR_IRQ |
- IRQSELECT_TARGET_ABORT_IRQ |
- IRQSELECT_MASTER_ABORT_IRQ );
+ nsp32_index_write2(base, IRQ_SELECT,
+ IRQSELECT_TIMER_IRQ |
+ IRQSELECT_SCSIRESET_IRQ |
+ IRQSELECT_FIFO_SHLD_IRQ |
+ IRQSELECT_RESELECT_IRQ |
+ IRQSELECT_PHASE_CHANGE_IRQ |
+ IRQSELECT_AUTO_SCSI_SEQ_IRQ |
+ // IRQSELECT_BMCNTERR_IRQ |
+ IRQSELECT_TARGET_ABORT_IRQ |
+ IRQSELECT_MASTER_ABORT_IRQ );
nsp32_write2(base, IRQ_CONTROL, 0);
/* PCI LED off */
@@ -1163,11 +1177,12 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
* IRQ check, then enable IRQ mask
*/
irq_stat = nsp32_read2(base, IRQ_STATUS);
- nsp32_dbg(NSP32_DEBUG_INTR,
+ nsp32_dbg(NSP32_DEBUG_INTR,
"enter IRQ: %d, IRQstatus: 0x%x", irq, irq_stat);
/* is this interrupt comes from Ninja asic? */
if ((irq_stat & IRQSTATUS_ANY_IRQ) == 0) {
- nsp32_dbg(NSP32_DEBUG_INTR, "shared interrupt: irq other 0x%x", irq_stat);
+ nsp32_dbg(NSP32_DEBUG_INTR,
+ "shared interrupt: irq other 0x%x", irq_stat);
goto out2;
}
handled = 1;
@@ -1207,7 +1222,8 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
if (SCpnt == NULL) {
nsp32_msg(KERN_WARNING, "SCpnt==NULL this can't be happened");
- nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
+ nsp32_msg(KERN_WARNING, "irq_stat=0x%x trans_stat=0x%x",
+ irq_stat, trans_stat);
goto out;
}
@@ -1265,13 +1281,13 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
"Data in/out phase processed");
/* read BMCNT, SGT pointer addr */
- nsp32_dbg(NSP32_DEBUG_INTR, "BMCNT=0x%lx",
+ nsp32_dbg(NSP32_DEBUG_INTR, "BMCNT=0x%lx",
nsp32_read4(base, BM_CNT));
- nsp32_dbg(NSP32_DEBUG_INTR, "addr=0x%lx",
+ nsp32_dbg(NSP32_DEBUG_INTR, "addr=0x%lx",
nsp32_read4(base, SGT_ADR));
- nsp32_dbg(NSP32_DEBUG_INTR, "SACK=0x%lx",
+ nsp32_dbg(NSP32_DEBUG_INTR, "SACK=0x%lx",
nsp32_read4(base, SACK_CNT));
- nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx",
+ nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx",
nsp32_read4(base, SAVED_SACK_CNT));
scsi_set_resid(SCpnt, 0); /* all data transferred! */
@@ -1306,7 +1322,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
* Read CSB and substitute CSB for SCpnt->result
* to save status phase stutas byte.
* scsi error handler checks host_byte (DID_*:
- * low level driver to indicate status), then checks
+ * low level driver to indicate status), then checks
* status_byte (SCSI status byte).
*/
SCpnt->result = (int)nsp32_read1(base, SCSI_CSB_IN);
@@ -1314,7 +1330,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
if (auto_stat & ILLEGAL_PHASE) {
/* Illegal phase is detected. SACK is not back. */
- nsp32_msg(KERN_WARNING,
+ nsp32_msg(KERN_WARNING,
"AUTO SCSI ILLEGAL PHASE OCCUR!!!!");
/* TODO: currently we don't have any action... bus reset? */
@@ -1367,7 +1383,8 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
break;
default:
nsp32_dbg(NSP32_DEBUG_INTR, "fifo/other phase");
- nsp32_dbg(NSP32_DEBUG_INTR, "irq_stat=0x%x trans_stat=0x%x", irq_stat, trans_stat);
+ nsp32_dbg(NSP32_DEBUG_INTR, "irq_stat=0x%x trans_stat=0x%x",
+ irq_stat, trans_stat);
show_busphase(busphase);
break;
}
@@ -1433,32 +1450,39 @@ static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host)
{
unsigned long flags;
nsp32_hw_data *data;
- int hostno;
+ int hostno;
unsigned int base;
unsigned char mode_reg;
- int id, speed;
- long model;
+ int id, speed;
+ long model;
hostno = host->host_no;
data = (nsp32_hw_data *)host->hostdata;
base = host->io_port;
seq_puts(m, "NinjaSCSI-32 status\n\n");
- seq_printf(m, "Driver version: %s, $Revision: 1.33 $\n", nsp32_release_version);
- seq_printf(m, "SCSI host No.: %d\n", hostno);
- seq_printf(m, "IRQ: %d\n", host->irq);
- seq_printf(m, "IO: 0x%lx-0x%lx\n", host->io_port, host->io_port + host->n_io_port - 1);
- seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n", host->base, host->base + data->MmioLength - 1);
- seq_printf(m, "sg_tablesize: %d\n", host->sg_tablesize);
- seq_printf(m, "Chip revision: 0x%x\n", (nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
+ seq_printf(m, "Driver version: %s, $Revision: 1.33 $\n",
+ nsp32_release_version);
+ seq_printf(m, "SCSI host No.: %d\n", hostno);
+ seq_printf(m, "IRQ: %d\n", host->irq);
+ seq_printf(m, "IO: 0x%lx-0x%lx\n",
+ host->io_port, host->io_port + host->n_io_port - 1);
+ seq_printf(m, "MMIO(virtual address): 0x%lx-0x%lx\n",
+ host->base, host->base + data->MmioLength - 1);
+ seq_printf(m, "sg_tablesize: %d\n",
+ host->sg_tablesize);
+ seq_printf(m, "Chip revision: 0x%x\n",
+ (nsp32_read2(base, INDEX_REG) >> 8) & 0xff);
mode_reg = nsp32_index_read1(base, CHIP_MODE);
model = data->pci_devid->driver_data;
#ifdef CONFIG_PM
- seq_printf(m, "Power Management: %s\n", (mode_reg & OPTF) ? "yes" : "no");
+ seq_printf(m, "Power Management: %s\n",
+ (mode_reg & OPTF) ? "yes" : "no");
#endif
- seq_printf(m, "OEM: %ld, %s\n", (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
+ seq_printf(m, "OEM: %ld, %s\n",
+ (mode_reg & (OEM0|OEM1)), nsp32_model[model]);
spin_lock_irqsave(&(data->Lock), flags);
seq_printf(m, "CurrentSC: 0x%p\n\n", data->CurrentSC);
@@ -1476,7 +1500,7 @@ static int nsp32_show_info(struct seq_file *m, struct Scsi_Host *host)
}
if (data->target[id].sync_flag == SDTR_DONE) {
- if (data->target[id].period == 0 &&
+ if (data->target[id].period == 0 &&
data->target[id].offset == ASYNC_OFFSET ) {
seq_puts(m, "async");
} else {
@@ -1518,7 +1542,7 @@ static void nsp32_scsi_done(struct scsi_cmnd *SCpnt)
* clear TRANSFERCONTROL_BM_START
*/
nsp32_write2(base, TRANSFER_CONTROL, 0);
- nsp32_write4(base, BM_CNT, 0);
+ nsp32_write4(base, BM_CNT, 0);
/*
* call scsi_done
@@ -1528,10 +1552,10 @@ static void nsp32_scsi_done(struct scsi_cmnd *SCpnt)
/*
* reset parameters
*/
- data->cur_lunt->SCpnt = NULL;
- data->cur_lunt = NULL;
- data->cur_target = NULL;
- data->CurrentSC = NULL;
+ data->cur_lunt->SCpnt = NULL;
+ data->cur_lunt = NULL;
+ data->cur_target = NULL;
+ data->CurrentSC = NULL;
}
@@ -1553,7 +1577,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
nsp32_dbg(NSP32_DEBUG_BUSFREE, "enter execph=0x%x", execph);
show_autophase(execph);
- nsp32_write4(base, BM_CNT, 0);
+ nsp32_write4(base, BM_CNT, 0);
nsp32_write2(base, TRANSFER_CONTROL, 0);
/*
@@ -1561,7 +1585,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
*
* VALID:
* Save Data Pointer is received. Adjust pointer.
- *
+ *
* NO-VALID:
* SCSI-3 says if Save Data Pointer is not received, then we restart
* processing and we can't adjust any SCSI data pointer in next data
@@ -1574,7 +1598,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
* Check sack_cnt/saved_sack_cnt, then adjust sg table if
* needed.
*/
- if (!(execph & MSGIN_00_VALID) &&
+ if (!(execph & MSGIN_00_VALID) &&
((execph & DATA_IN_PHASE) || (execph & DATA_OUT_PHASE))) {
unsigned int sacklen, s_sacklen;
@@ -1617,7 +1641,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
* no processing.
*/
}
-
+
if (execph & MSGIN_03_VALID) {
/* MsgIn03 was valid to be processed. No need processing. */
}
@@ -1639,7 +1663,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
* negotiating.
*/
if (execph & (MSGIN_00_VALID | MSGIN_04_VALID)) {
- /*
+ /*
* If valid message is received, then
* negotiation is succeeded.
*/
@@ -1667,12 +1691,12 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
SCpnt->SCp.Message = 0;
- nsp32_dbg(NSP32_DEBUG_BUSFREE,
+ nsp32_dbg(NSP32_DEBUG_BUSFREE,
"normal end stat=0x%x resid=0x%x\n",
SCpnt->SCp.Status, scsi_get_resid(SCpnt));
- SCpnt->result = (DID_OK << 16) |
- (SCpnt->SCp.Message << 8) |
- (SCpnt->SCp.Status << 0);
+ SCpnt->result = (DID_OK << 16) |
+ (SCpnt->SCp.Message << 8) |
+ (SCpnt->SCp.Status << 0);
nsp32_scsi_done(SCpnt);
/* All operation is done */
return TRUE;
@@ -1680,7 +1704,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
/* MsgIn 04: Disconnect */
SCpnt->SCp.Status = nsp32_read1(base, SCSI_CSB_IN);
SCpnt->SCp.Message = 4;
-
+
nsp32_dbg(NSP32_DEBUG_BUSFREE, "disconnect");
return TRUE;
} else {
@@ -1706,12 +1730,12 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
- int old_entry = data->cur_entry;
- int new_entry;
- int sg_num = data->cur_lunt->sg_num;
- nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt;
- unsigned int restlen, sentlen;
- u32_le len, addr;
+ int old_entry = data->cur_entry;
+ int new_entry;
+ int sg_num = data->cur_lunt->sg_num;
+ nsp32_sgtable *sgt = data->cur_lunt->sglun->sgt;
+ unsigned int restlen, sentlen;
+ u32_le len, addr;
nsp32_dbg(NSP32_DEBUG_SGLIST, "old resid=0x%x", scsi_get_resid(SCpnt));
@@ -1719,7 +1743,7 @@ static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen
s_sacklen -= le32_to_cpu(sgt[old_entry].addr) & 3;
/*
- * calculate new_entry from sack count and each sgt[].len
+ * calculate new_entry from sack count and each sgt[].len
* calculate the byte which is intent to send
*/
sentlen = 0;
@@ -1737,8 +1761,10 @@ static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen
if (sentlen == s_sacklen) {
/* XXX: confirm it's ok or not */
- /* In this case, it's ok because we are at
- the head element of the sg. restlen is correctly calculated. */
+ /* In this case, it's ok because we are at
+ * the head element of the sg. restlen is correctly
+ * calculated.
+ */
}
/* calculate the rest length for transferring */
@@ -1753,7 +1779,7 @@ static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen
/* set cur_entry with new_entry */
data->cur_entry = new_entry;
-
+
return;
last:
@@ -1781,7 +1807,7 @@ static void nsp32_msgout_occur(struct scsi_cmnd *SCpnt)
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
unsigned int base = SCpnt->device->host->io_port;
int i;
-
+
nsp32_dbg(NSP32_DEBUG_MSGOUTOCCUR,
"enter: msgout_len: 0x%x", data->msgout_len);
@@ -1815,10 +1841,10 @@ static void nsp32_msgout_occur(struct scsi_cmnd *SCpnt)
//nsp32_restart_autoscsi(SCpnt, command);
nsp32_write2(base, COMMAND_CONTROL,
(CLEAR_CDB_FIFO_POINTER |
- AUTO_COMMAND_PHASE |
- AUTOSCSI_RESTART |
- AUTO_MSGIN_00_OR_04 |
- AUTO_MSGIN_02 ));
+ AUTO_COMMAND_PHASE |
+ AUTOSCSI_RESTART |
+ AUTO_MSGIN_00_OR_04 |
+ AUTO_MSGIN_02 ));
}
/*
* Write data with SACK, then wait sack is
@@ -1918,9 +1944,9 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
unsigned char msgtype;
unsigned char newlun;
unsigned short command = 0;
- int msgclear = TRUE;
- long new_sgtp;
- int ret;
+ int msgclear = TRUE;
+ long new_sgtp;
+ int ret;
/*
* read first message
@@ -1960,7 +1986,7 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
goto reject;
}
}
-
+
/*
* processing messages except for IDENTIFY
*
@@ -1976,10 +2002,10 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
* These messages should not be occurred.
* They should be processed on AutoSCSI sequencer.
*/
- nsp32_msg(KERN_WARNING,
+ nsp32_msg(KERN_WARNING,
"unexpected message of AutoSCSI MsgIn: 0x%x", msg);
break;
-
+
case RESTORE_POINTERS:
/*
* AutoMsgIn03 is disabled, and HBA gets this message.
@@ -2005,7 +2031,7 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
/*
* set new sg pointer
*/
- new_sgtp = data->cur_lunt->sglun_paddr +
+ new_sgtp = data->cur_lunt->sglun_paddr +
(data->cur_lunt->cur_entry * sizeof(nsp32_sgtable));
nsp32_write4(base, SGT_ADR, new_sgtp);
@@ -2016,13 +2042,13 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
* These messages should not be occurred.
* They should be processed on AutoSCSI sequencer.
*/
- nsp32_msg (KERN_WARNING,
+ nsp32_msg (KERN_WARNING,
"unexpected message of AutoSCSI MsgIn: SAVE_POINTERS");
-
+
break;
-
+
case MESSAGE_REJECT:
- /* If previous message_out is sending SDTR, and get
+ /* If previous message_out is sending SDTR, and get
message_reject from target, SDTR negotiation is failed */
if (data->cur_target->sync_flag &
(SDTR_INITIATOR | SDTR_TARGET)) {
@@ -2041,7 +2067,7 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
case LINKED_CMD_COMPLETE:
case LINKED_FLG_CMD_COMPLETE:
/* queue tag is not supported currently */
- nsp32_msg (KERN_WARNING,
+ nsp32_msg (KERN_WARNING,
"unsupported message: 0x%x", msgtype);
break;
@@ -2094,7 +2120,7 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
}
/*
- * Reach here means regular length of each type of
+ * Reach here means regular length of each type of
* extended messages.
*/
switch (data->msginbuf[2]) {
@@ -2129,12 +2155,12 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
goto reject; /* not implemented yet */
break;
-
+
default:
goto reject;
}
break;
-
+
default:
goto reject;
}
@@ -2150,7 +2176,7 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
* AutoSCSI restart, at the same time MsgOutOccur should be
* happened (however, such situation is really possible...?).
*/
- if (data->msgout_len > 0) {
+ if (data->msgout_len > 0) {
nsp32_write4(base, SCSI_MSG_OUT, 0);
command |= AUTO_ATN;
}
@@ -2192,7 +2218,7 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
return;
reject:
- nsp32_msg(KERN_WARNING,
+ nsp32_msg(KERN_WARNING,
"invalid or unsupported MessageIn, rejected. "
"current msg: 0x%x (len: 0x%x), processing msg: 0x%x",
msg, data->msgin_len, msgtype);
@@ -2203,15 +2229,15 @@ static void nsp32_msgin_occur(struct scsi_cmnd *SCpnt,
}
/*
- *
+ *
*/
static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)
{
nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
- nsp32_target *target = data->cur_target;
- unsigned char get_period = data->msginbuf[3];
- unsigned char get_offset = data->msginbuf[4];
- int entry;
+ nsp32_target *target = data->cur_target;
+ unsigned char get_period = data->msginbuf[3];
+ unsigned char get_offset = data->msginbuf[4];
+ int entry;
nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "enter");
@@ -2219,16 +2245,16 @@ static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)
* If this inititor sent the SDTR message, then target responds SDTR,
* initiator SYNCREG, ACKWIDTH from SDTR parameter.
* Messages are not appropriate, then send back reject message.
- * If initiator did not send the SDTR, but target sends SDTR,
+ * If initiator did not send the SDTR, but target sends SDTR,
* initiator calculator the appropriate parameter and send back SDTR.
- */
+ */
if (target->sync_flag & SDTR_INITIATOR) {
/*
* Initiator sent SDTR, the target responds and
* send back negotiation SDTR.
*/
nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target responds SDTR");
-
+
target->sync_flag &= ~SDTR_INITIATOR;
target->sync_flag |= SDTR_DONE;
@@ -2242,7 +2268,7 @@ static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)
*/
goto reject;
}
-
+
if (get_offset == ASYNC_OFFSET) {
/*
* Negotiation is succeeded, the target want
@@ -2273,7 +2299,7 @@ static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)
if (entry < 0) {
/*
- * Target want to use long period which is not
+ * Target want to use long period which is not
* acceptable NinjaSCSI-32Bi/UDE.
*/
goto reject;
@@ -2286,7 +2312,7 @@ static void nsp32_analyze_sdtr(struct scsi_cmnd *SCpnt)
} else {
/* Target send SDTR to initiator. */
nsp32_dbg(NSP32_DEBUG_MSGINOCCUR, "target send SDTR");
-
+
target->sync_flag |= SDTR_INITIATOR;
/* offset: */
@@ -2409,7 +2435,7 @@ static void nsp32_set_max_sync(nsp32_hw_data *data,
*/
static void nsp32_set_sync_entry(nsp32_hw_data *data,
nsp32_target *target,
- int entry,
+ int entry,
unsigned char offset)
{
unsigned char period, ackwidth, sample_rate;
@@ -2438,7 +2464,7 @@ static void nsp32_set_sync_entry(nsp32_hw_data *data,
static void nsp32_wait_req(nsp32_hw_data *data, int state)
{
unsigned int base = data->BaseAddress;
- int wait_time = 0;
+ int wait_time = 0;
unsigned char bus, req_bit;
if (!((state == ASSERT) || (state == NEGATE))) {
@@ -2450,7 +2476,7 @@ static void nsp32_wait_req(nsp32_hw_data *data, int state)
do {
bus = nsp32_read1(base, SCSI_BUS_MONITOR);
if ((bus & BUSMON_REQ) == req_bit) {
- nsp32_dbg(NSP32_DEBUG_WAIT,
+ nsp32_dbg(NSP32_DEBUG_WAIT,
"wait_time: %d", wait_time);
return;
}
@@ -2467,7 +2493,7 @@ static void nsp32_wait_req(nsp32_hw_data *data, int state)
static void nsp32_wait_sack(nsp32_hw_data *data, int state)
{
unsigned int base = data->BaseAddress;
- int wait_time = 0;
+ int wait_time = 0;
unsigned char bus, ack_bit;
if (!((state == ASSERT) || (state == NEGATE))) {
@@ -2532,8 +2558,8 @@ static int nsp32_detect(struct pci_dev *pdev)
struct Scsi_Host *host; /* registered host structure */
struct resource *res;
nsp32_hw_data *data;
- int ret;
- int i, j;
+ int ret;
+ int i, j;
nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
@@ -2610,7 +2636,7 @@ static int nsp32_detect(struct pci_dev *pdev)
*/
/*
- * setup DMA
+ * setup DMA
*/
if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)) != 0) {
nsp32_msg (KERN_ERR, "failed to set PCI DMA mask");
@@ -2710,16 +2736,16 @@ static int nsp32_detect(struct pci_dev *pdev)
goto free_sg_list;
}
- /*
+ /*
* PCI IO register
*/
res = request_region(host->io_port, host->n_io_port, "nsp32");
if (res == NULL) {
- nsp32_msg(KERN_ERR,
+ nsp32_msg(KERN_ERR,
"I/O region 0x%x+0x%x is already used",
data->BaseAddress, data->NumAddress);
goto free_irq;
- }
+ }
ret = scsi_add_host(host, &pdev->dev);
if (ret) {
@@ -2743,7 +2769,7 @@ static int nsp32_detect(struct pci_dev *pdev)
free_autoparam:
dma_free_coherent(&pdev->dev, sizeof(nsp32_autoparam),
data->autoparam, data->auto_paddr);
-
+
scsi_unregister:
scsi_host_put(host);
@@ -2810,7 +2836,7 @@ static int nsp32_eh_abort(struct scsi_cmnd *SCpnt)
}
nsp32_write2(base, TRANSFER_CONTROL, 0);
- nsp32_write2(base, BM_CNT, 0);
+ nsp32_write2(base, BM_CNT, 0);
SCpnt->result = DID_ABORT << 16;
nsp32_scsi_done(SCpnt);
@@ -2833,8 +2859,8 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)
* clear counter
*/
nsp32_write2(base, TRANSFER_CONTROL, 0);
- nsp32_write4(base, BM_CNT, 0);
- nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
+ nsp32_write4(base, BM_CNT, 0);
+ nsp32_write4(base, CLR_COUNTER, CLRCOUNTER_ALLMASK);
/*
* fall back to asynchronous transfer mode
@@ -2856,7 +2882,7 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)
for(i = 0; i < 5; i++) {
intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */
nsp32_dbg(NSP32_DEBUG_BUSRESET, "irq:1: 0x%x", intrdat);
- }
+ }
data->CurrentSC = NULL;
}
@@ -2867,7 +2893,7 @@ static int nsp32_eh_host_reset(struct scsi_cmnd *SCpnt)
unsigned int base = SCpnt->device->host->io_port;
nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
- nsp32_msg(KERN_INFO, "Host Reset");
+ nsp32_msg(KERN_INFO, "Host Reset");
nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt);
spin_lock_irq(SCpnt->device->host->host_lock);
@@ -2942,13 +2968,13 @@ static int nsp32_getprom_param(nsp32_hw_data *data)
* AT24C01A (Logitec: LHA-600S), AT24C02 (Melco Buffalo: IFC-USLP) data map:
*
* ROMADDR
- * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6)
+ * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6)
* Value 0x0: ASYNC, 0x0c: Ultra-20M, 0x19: Fast-10M
* 0x07 : HBA Synchronous Transfer Period
* Value 0: AutoSync, 1: Manual Setting
* 0x08 - 0x0f : Not Used? (0x0)
* 0x10 : Bus Termination
- * Value 0: Auto[ON], 1: ON, 2: OFF
+ * Value 0: Auto[ON], 1: ON, 2: OFF
* 0x11 : Not Used? (0)
* 0x12 : Bus Reset Delay Time (0x03)
* 0x13 : Bootable CD Support
@@ -2956,7 +2982,7 @@ static int nsp32_getprom_param(nsp32_hw_data *data)
* 0x14 : Device Scan
* Bit 7 6 5 4 3 2 1 0
* | <----------------->
- * | SCSI ID: Value 0: Skip, 1: YES
+ * | SCSI ID: Value 0: Skip, 1: YES
* |-> Value 0: ALL scan, Value 1: Manual
* 0x15 - 0x1b : Not Used? (0)
* 0x1c : Constant? (0x01) (clock div?)
@@ -2967,10 +2993,10 @@ static int nsp32_getprom_param(nsp32_hw_data *data)
*/
static int nsp32_getprom_at24(nsp32_hw_data *data)
{
- int ret, i;
- int auto_sync;
+ int ret, i;
+ int auto_sync;
nsp32_target *target;
- int entry;
+ int entry;
/*
* Reset time which is designated by EEPROM.
@@ -3036,7 +3062,7 @@ static int nsp32_getprom_at24(nsp32_hw_data *data)
* C16 110 (I-O Data: SC-NBD) data map:
*
* ROMADDR
- * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6)
+ * 0x00 - 0x06 : Device Synchronous Transfer Period (SCSI ID 0 - 6)
* Value 0x0: 20MB/S, 0x1: 10MB/S, 0x2: 5MB/S, 0x3: ASYNC
* 0x07 : 0 (HBA Synchronous Transfer Period: Auto Sync)
* 0x08 - 0x0f : Not Used? (0x0)
@@ -3044,7 +3070,7 @@ static int nsp32_getprom_at24(nsp32_hw_data *data)
* Value 0: PIO, 1: Busmater
* 0x11 : Bus Reset Delay Time (0x00-0x20)
* 0x12 : Bus Termination
- * Value 0: Disable, 1: Enable
+ * Value 0: Disable, 1: Enable
* 0x13 - 0x19 : Disconnection
* Value 0: Disable, 1: Enable
* 0x1a - 0x7c : Not Used? (0)
@@ -3054,9 +3080,9 @@ static int nsp32_getprom_at24(nsp32_hw_data *data)
*/
static int nsp32_getprom_c16(nsp32_hw_data *data)
{
- int ret, i;
+ int ret, i;
nsp32_target *target;
- int entry, val;
+ int entry, val;
/*
* Reset time which is designated by EEPROM.
@@ -3156,7 +3182,7 @@ static int nsp32_prom_read(nsp32_hw_data *data, int romaddr)
for (i = 7; i >= 0; i--) {
val += (nsp32_prom_read_bit(data) << i);
}
-
+
/* no ack */
nsp32_prom_write_bit(data, 1);
@@ -3281,7 +3307,8 @@ static int nsp32_resume(struct pci_dev *pdev)
nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
unsigned short reg;
- nsp32_msg(KERN_INFO, "pci-resume: pdev=0x%p, slot=%s, host=0x%p", pdev, pci_name(pdev), host);
+ nsp32_msg(KERN_INFO, "pci-resume: pdev=0x%p, slot=%s, host=0x%p",
+ pdev, pci_name(pdev), host);
pci_set_power_state(pdev, PCI_D0);
pci_enable_wake (pdev, PCI_D0, 0);
@@ -3316,13 +3343,13 @@ static int nsp32_probe(struct pci_dev *pdev, const struct pci_device_id *id)
nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
- ret = pci_enable_device(pdev);
+ ret = pci_enable_device(pdev);
if (ret) {
nsp32_msg(KERN_ERR, "failed to enable pci device");
return ret;
}
- data->Pci = pdev;
+ data->Pci = pdev;
data->pci_devid = id;
data->IrqNumber = pdev->irq;
data->BaseAddress = pci_resource_start(pdev, 0);
@@ -3351,7 +3378,7 @@ static void nsp32_remove(struct pci_dev *pdev)
nsp32_dbg(NSP32_DEBUG_REGISTER, "enter");
- scsi_remove_host(host);
+ scsi_remove_host(host);
nsp32_release(host);
@@ -3364,8 +3391,8 @@ static struct pci_driver nsp32_driver = {
.probe = nsp32_probe,
.remove = nsp32_remove,
#ifdef CONFIG_PM
- .suspend = nsp32_suspend,
- .resume = nsp32_resume,
+ .suspend = nsp32_suspend,
+ .resume = nsp32_resume,
#endif
};
--
2.29.2
next prev parent reply other threads:[~2021-04-27 8:31 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-27 8:30 [PATCHv3 00/40] SCSI result cleanup, part 2 Hannes Reinecke
2021-04-27 8:30 ` [PATCH 01/40] st: return error code in st_scsi_execute() Hannes Reinecke
2021-04-27 12:11 ` "Kai Mäkisara (Kolumbus)"
2021-04-27 8:30 ` [PATCH 02/40] scsi_ioctl: return error code when blk_rq_map_kern() fails Hannes Reinecke
2021-04-27 8:30 ` [PATCH 03/40] scsi: Fixup calling convention for scsi_mode_sense() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 04/40] scsi: reshuffle response handling in scsi_mode_sense() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 05/40] scsi_dh_alua: check for negative result value Hannes Reinecke
2021-04-27 8:30 ` [PATCH 06/40] scsi: stop using DRIVER_ERROR Hannes Reinecke
2021-04-27 8:30 ` [PATCH 07/40] scsi: introduce scsi_build_sense() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 08/40] scsi: introduce scsi_status_is_check_condition() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 09/40] scsi: Kill DRIVER_SENSE Hannes Reinecke
2021-04-27 8:30 ` [PATCH 10/40] scsi: do not use DRIVER_INVALID Hannes Reinecke
2021-04-27 8:30 ` [PATCH 11/40] scsi_error: use DID_TIME_OUT instead of DRIVER_TIMEOUT Hannes Reinecke
2021-04-27 8:30 ` [PATCH 12/40] xen-scsiback: use DID_ERROR instead of DRIVER_ERROR Hannes Reinecke
2021-04-27 8:30 ` [PATCH 13/40] xen-scsifront: compability status handling Hannes Reinecke
2021-04-27 8:30 ` [PATCH 14/40] scsi: Drop the now obsolete driver_byte definitions Hannes Reinecke
2021-04-27 8:30 ` [PATCH 15/40] NCR5380: Fold SCSI message ABORT onto DID_ABORT Hannes Reinecke
2021-04-27 8:30 ` [PATCH 16/40] scsi: add get_{status,host}_byte() accessor function Hannes Reinecke
2021-04-27 8:30 ` [PATCH 17/40] scsi: add scsi_msg_to_host_byte() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 18/40] dc395: use standard macros to set SCSI result Hannes Reinecke
2021-04-27 8:30 ` [PATCH 19/40] dc395: translate message bytes Hannes Reinecke
2021-04-27 8:30 ` [PATCH 20/40] qlogicfas408: make ql_pcmd() a void function Hannes Reinecke
2021-04-27 8:30 ` [PATCH 21/40] qlogicfas408: whitespace cleanup Hannes Reinecke
2021-04-27 8:30 ` [PATCH 22/40] qlogicfas408: translate message to host byte status Hannes Reinecke
2021-04-27 8:30 ` Hannes Reinecke [this message]
2021-04-27 8:30 ` [PATCH 24/40] nsp32: do not set message byte Hannes Reinecke
2021-04-27 8:30 ` [PATCH 25/40] wd33c93: translate message byte to host byte Hannes Reinecke
2021-04-27 8:30 ` [PATCH 26/40] mesh: translate message to host byte status Hannes Reinecke
2021-04-27 8:30 ` [PATCH 27/40] acornscsi: remove acornscsi_reportstatus() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 28/40] acornscsi: translate message byte to host byte Hannes Reinecke
2021-04-27 8:30 ` [PATCH 29/40] aha152x: modify done() to use separate status bytes Hannes Reinecke
2021-04-27 8:30 ` [PATCH 30/40] aha152x: do not set message byte when calling scsi_done() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 31/40] advansys: do not set message byte in SCSI status Hannes Reinecke
2021-04-27 8:30 ` [PATCH 32/40] fas216: translate message to host byte status Hannes Reinecke
2021-04-27 8:30 ` [PATCH 33/40] fas216: Use get_status_byte() to avoid using linux-specific status codes Hannes Reinecke
2021-04-27 8:30 ` [PATCH 34/40] FlashPoint: Use standard SCSI definitions Hannes Reinecke
2021-04-27 8:30 ` [PATCH 35/40] fdomain: drop last argument to fdomain_finish_cmd() Hannes Reinecke
2021-04-27 8:30 ` [PATCH 36/40] fdomain: translate message to host byte status Hannes Reinecke
2021-04-27 8:30 ` [PATCH 37/40] scsi: drop message byte helper Hannes Reinecke
2021-04-27 8:30 ` [PATCH 38/40] scsi: kill message byte Hannes Reinecke
2021-04-27 8:30 ` [PATCH 39/40] target: use standard SAM status types Hannes Reinecke
2021-04-27 8:30 ` [PATCH 40/40] scsi: drop obsolete linux-specific SCSI status codes Hannes Reinecke
2021-04-29 6:48 ` Christoph Hellwig
2021-04-29 7:29 ` Hannes Reinecke
2021-04-29 15:52 ` Douglas Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210427083046.31620-24-hare@suse.de \
--to=hare@suse.de \
--cc=bvanassche@acm.org \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.