All of lore.kernel.org
 help / color / mirror / Atom feed
From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
To: daniel.lezcano@linaro.org, rui.zhang@intel.com, amitk@kernel.org
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Subject: [PATCH 2/2] thermal: int340x: processor_thermal: Export additional attributes
Date: Sun, 16 May 2021 23:14:41 -0700	[thread overview]
Message-ID: <20210517061441.1921901-3-srinivas.pandruvada@linux.intel.com> (raw)
In-Reply-To: <20210517061441.1921901-1-srinivas.pandruvada@linux.intel.com>

Export additional attributes:

ddr_data_rate (RO) : Show current DDR (Double Data Rate) data rate.
rfi_restriction (RW) : Show or set current state for RFI (Radio
			Frequency Interference) protection.

These attributes use mailbox commands to get/set information. Here
command codes are:
0x0007: Read RFI restriction
0x0107: Read DDR data rate
0x0008: Write RFI restriction

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 .../int340x_thermal/processor_thermal_rfim.c  | 55 +++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
index aef993a813e2..2b8a3235d518 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
@@ -190,6 +190,59 @@ static DEVICE_ATTR_RO(ddr_data_rate_point_2);
 static DEVICE_ATTR_RO(ddr_data_rate_point_3);
 static DEVICE_ATTR_RW(rfi_disable);
 
+static ssize_t rfi_restriction_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	u16 cmd_id = 0x0008;
+	u32 cmd_resp;
+	u32 input;
+	int ret;
+
+	ret = kstrtou32(buf, 10, &input);
+	if (ret)
+		return ret;
+
+	ret = processor_thermal_send_mbox_cmd(to_pci_dev(dev), cmd_id, input, &cmd_resp);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t rfi_restriction_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	u16 cmd_id = 0x0007;
+	u32 cmd_resp;
+	int ret;
+
+	ret = processor_thermal_send_mbox_cmd(to_pci_dev(dev), cmd_id, 0, &cmd_resp);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", cmd_resp);
+}
+
+static ssize_t ddr_data_rate_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	u16 cmd_id = 0x0107;
+	u32 cmd_resp;
+	int ret;
+
+	ret = processor_thermal_send_mbox_cmd(to_pci_dev(dev), cmd_id, 0, &cmd_resp);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", cmd_resp);
+}
+
+static DEVICE_ATTR_RW(rfi_restriction);
+static DEVICE_ATTR_RO(ddr_data_rate);
+
 static struct attribute *dvfs_attrs[] = {
 	&dev_attr_rfi_restriction_run_busy.attr,
 	&dev_attr_rfi_restriction_err_code.attr,
@@ -199,6 +252,8 @@ static struct attribute *dvfs_attrs[] = {
 	&dev_attr_ddr_data_rate_point_2.attr,
 	&dev_attr_ddr_data_rate_point_3.attr,
 	&dev_attr_rfi_disable.attr,
+	&dev_attr_ddr_data_rate.attr,
+	&dev_attr_rfi_restriction.attr,
 	NULL
 };
 
-- 
2.27.0


  parent reply	other threads:[~2021-05-17  6:22 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-17  6:14 [PATCH 0/2] thermal: int340x: processor_thermal: Add additional Srinivas Pandruvada
2021-05-17  6:14 ` [PATCH 1/2] thermal: int340x: processor_thermal: Export mailbox interface Srinivas Pandruvada
2021-06-21  9:46   ` [thermal: thermal/next] thermal/drivers/int340x: " thermal-bot for Srinivas Pandruvada
2021-05-17  6:14 ` Srinivas Pandruvada [this message]
2021-06-21  9:46   ` [thermal: thermal/next] thermal/drivers/int340x: processor_thermal: Export additional attributes thermal-bot for Srinivas Pandruvada
2021-07-06  8:26 ` [PATCH 0/2] thermal: int340x: processor_thermal: Add additional You-Sheng Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210517061441.1921901-3-srinivas.pandruvada@linux.intel.com \
    --to=srinivas.pandruvada@linux.intel.com \
    --cc=amitk@kernel.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.