All of lore.kernel.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	<linux-mtd@lists.infradead.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [RESEND v3 2/4] mtd: rawnand: Add a helper to parse the gpio-cs DT property
Date: Wed, 26 May 2021 11:32:40 +0200	[thread overview]
Message-ID: <20210526093242.183847-3-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20210526093242.183847-1-miquel.raynal@bootlin.com>

New chips may feature a lot of CS because of their extended length. As
many controllers have been designed a decade ago, they usually only
feature just a couple. This does not mean that the entire range of
these chips cannot be accessed: it is just a matter of adding more
GPIO CS in the hardware design. A DT property has been added to
describe the CS array: cs-gpios.

Here is the code parsing it this new property, allocating what needs to
be, requesting the GPIOs and returning an array with the additional
available CS. The first entries of this array are left empty and are
reserved for native CS.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/nand_base.c | 39 ++++++++++++++++++++++++++++++++
 include/linux/mtd/rawnand.h      |  4 ++++
 2 files changed, 43 insertions(+)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index fb072c444495..aad687b587a5 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -42,6 +42,7 @@
 #include <linux/io.h>
 #include <linux/mtd/partitions.h>
 #include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/gpio/consumer.h>
 
 #include "internals.h"
@@ -5078,6 +5079,44 @@ static int of_get_nand_secure_regions(struct nand_chip *chip)
 	return 0;
 }
 
+/**
+ * rawnand_dt_parse_gpio_cs - Parse the gpio-cs property of a controller
+ * @dev: Device that will be parsed. Also used for managed allocations.
+ * @cs_array: Array of GPIO desc pointers allocated on success
+ * @ncs_array: Number of entries in @cs_array updated on success.
+ * @return 0 on success, an error otherwise.
+ */
+int rawnand_dt_parse_gpio_cs(struct device *dev, struct gpio_desc ***cs_array,
+			     unsigned int *ncs_array)
+{
+	struct device_node *np = dev->of_node;
+	struct gpio_desc **descs;
+	int ndescs, i;
+
+	ndescs = of_gpio_named_count(np, "cs-gpios");
+	if (ndescs < 0) {
+		dev_dbg(dev, "No valid cs-gpios property\n");
+		return 0;
+	}
+
+	descs = devm_kcalloc(dev, ndescs, sizeof(*descs), GFP_KERNEL);
+	if (!descs)
+		return -ENOMEM;
+
+	for (i = 0; i < ndescs; i++) {
+		descs[i] = gpiod_get_index_optional(dev, "cs", i,
+						    GPIOD_OUT_HIGH);
+		if (IS_ERR(descs[i]))
+			return PTR_ERR(descs[i]);
+	}
+
+	*ncs_array = ndescs;
+	*cs_array = descs;
+
+	return 0;
+}
+EXPORT_SYMBOL(rawnand_dt_parse_gpio_cs);
+
 static int rawnand_dt_init(struct nand_chip *chip)
 {
 	struct nand_device *nand = mtd_to_nanddev(nand_to_mtd(chip));
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 93f5c0196a09..e01255a9e591 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -1446,4 +1446,8 @@ static inline void *nand_get_data_buf(struct nand_chip *chip)
 	return chip->data_buf;
 }
 
+/* Parse the gpio-cs property */
+int rawnand_dt_parse_gpio_cs(struct device *dev, struct gpio_desc ***cs_array,
+			     unsigned int *ncs_array);
+
 #endif /* __LINUX_MTD_RAWNAND_H */
-- 
2.27.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  parent reply	other threads:[~2021-05-26 11:28 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-26  9:32 [RESEND v3 0/4] Bring GPIO CS support to the Arasan controller driver Miquel Raynal
2021-05-26  9:32 ` [RESEND v3 1/4] mtd: rawnand: Move struct gpio_desc declaration to the top Miquel Raynal
2021-05-26 14:34   ` Miquel Raynal
2021-05-26  9:32 ` Miquel Raynal [this message]
2021-05-26 14:34   ` [RESEND v3 2/4] mtd: rawnand: Add a helper to parse the gpio-cs DT property Miquel Raynal
2021-05-26  9:32 ` [RESEND v3 3/4] mtd: rawnand: arasan: Ensure proper configuration for the asserted target Miquel Raynal
2021-05-26 14:34   ` Miquel Raynal
2021-05-26  9:32 ` [RESEND v3 4/4] mtd: rawnand: arasan: Leverage additional GPIO CS Miquel Raynal
2021-05-26 14:34   ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210526093242.183847-3-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.