From: Konrad Dybcio <konrad.dybcio@somainline.org>
To: ~postmarketos/upstreaming@lists.sr.ht
Cc: martin.botka@somainline.org,
angelogioacchino.delregno@somainline.org,
marijn.suijten@somainline.org, jamipkettunen@somainline.org,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 29/39] arm64: dts: qcom: sdm630-xperia-nile: Add all RPM and fixed regulators
Date: Thu, 29 Jul 2021 00:25:32 +0200 [thread overview]
Message-ID: <20210728222542.54269-30-konrad.dybcio@somainline.org> (raw)
In-Reply-To: <20210728222542.54269-1-konrad.dybcio@somainline.org>
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Add all of the RPM PM660/PM660L regulators and the fixed ones,
defining the common electrical part of this platform.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 395 +++++++++++++++++-
1 file changed, 394 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 9ba359c848d0..b7f3da0d72e7 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -1,6 +1,8 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
- * Copyright (c) 2020, Konrad Dybcio
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno
+ * <angelogioacchino.delregno@somainline.org>
*/
/dts-v1/;
@@ -39,6 +41,55 @@ framebuffer0: framebuffer@9d400000 {
};
};
+ board_vbat: vbat-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT";
+
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ cam_vdig_imx300_219_vreg: cam_vdig_imx300_219_vreg {
+ compatible = "regulator-fixed";
+ regulator-name = "cam_vdig_imx300_219_vreg";
+ startup-delay-us = <0>;
+ enable-active-high;
+ gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_vdig_default>;
+ };
+
+ cam_vana_front_vreg: cam_vana_front_vreg {
+ compatible = "regulator-fixed";
+ regulator-name = "cam_vana_front_vreg";
+ startup-delay-us = <0>;
+ enable-active-high;
+ gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&imx219_vana_default>;
+ };
+
+ cam_vana_rear_vreg: cam_vana_rear_vreg {
+ compatible = "regulator-fixed";
+ regulator-name = "cam_vana_rear_vreg";
+ startup-delay-us = <0>;
+ enable-active-high;
+ gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ pinctrl-names = "default";
+ pinctrl-0 = <&imx300_vana_default>;
+ };
+
gpio_keys {
status = "okay";
compatible = "gpio-keys";
@@ -134,3 +185,345 @@ i2c@c1b6000 {
};
};
};
+
+&rpm_requests {
+ pm660l-regulators {
+ compatible = "qcom,rpm-pm660l-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+
+ vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+ vdd_l2-supply = <&vreg_bob>;
+ vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+ vdd_l4_l6-supply = <&vreg_bob>;
+ vdd_bob-supply = <&vph_pwr>;
+
+ vreg_s1b_1p125: s1 {
+ regulator-min-microvolt = <1125000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_s2b_1p05: s2 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ };
+
+ /*
+ * At least on Nile's configuration, S3B/S4B (VDD_CX) and
+ * S5B (VDD_MX) are managed only through RPM Power Domains.
+ * Trying to set a voltage on the main supply will create
+ * havoc and freeze the SoC.
+ * In any case, reference voltages for these regulators are:
+ * S3B/S4B: 0.870V
+ * S5B: 0.915V
+ */
+
+ /* LDOs */
+ vreg_l1b_0p925: l1 {
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <928000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l2b_2p95: l2 {
+ /*
+ * This regulator supports 1.648 - 3.104V on this board
+ * but we set a max voltage of anything less than 2.7V
+ * to satisfy a condition in sdhci.c that will disable
+ * 3.3V SDHCI signaling, which happens to be not really
+ * supported on the Xperia Nile/Ganges platform.
+ */
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2696000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l3b_3p0: l3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-min-microamp = <200>;
+ regulator-max-microamp = <600000>;
+ regulator-system-load = <100000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l4b_29p5: l4 {
+ regulator-min-microvolt = <2944000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+
+ regulator-min-microamp = <200>;
+ regulator-max-microamp = <600000>;
+ regulator-system-load = <570000>;
+ regulator-allow-set-load;
+ };
+
+ /*
+ * Downstream specifies a range of 1721-3600mV,
+ * but the only assigned consumers are SDHCI2 VMMC
+ * and Coresight QPDI that both request pinned 2.95V.
+ * Tighten the range to 1.8-3.328 (closest to 3.3) to
+ * make the mmc driver happy.
+ */
+ vreg_l5b_29p5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3328000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l6b_3p3: l6 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l7b_3p125: l7 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <3128000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l8b_3p3: l8 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ /* L9B (870mV) is currently unused */
+ /* L10B (915mV) is currently unused */
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3624000>;
+ regulator-enable-ramp-delay = <500>;
+ regulator-ramp-delay = <0>;
+ };
+ };
+
+ pm660-regulators {
+ compatible = "qcom,rpm-pm660-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+
+ vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+ vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+ vdd_l5-supply = <&vreg_s2b_1p05>;
+ vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+ vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+ /*
+ * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+ * by the Core Power Reduction hardened (CPRh) and the
+ * Operating State Manager (OSM) HW automatically.
+ */
+
+ vreg_s4a_2p04: s4 {
+ regulator-min-microvolt = <2040000>;
+ regulator-max-microvolt = <2040000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ regulator-always-on;
+ };
+
+ vreg_s5a_1p35: s5 {
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_s6a_0p87: s6 {
+ regulator-min-microvolt = <504000>;
+ regulator-max-microvolt = <992000>;
+ regulator-enable-ramp-delay = <150>;
+ regulator-ramp-delay = <0>;
+ };
+
+ /* LDOs */
+ vreg_l1a_1p225: l1 {
+ regulator-min-microvolt = <1226000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l2a_1p0: l2 {
+ regulator-min-microvolt = <944000>;
+ regulator-max-microvolt = <1008000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l3a_1p0: l3 {
+ regulator-min-microvolt = <944000>;
+ regulator-max-microvolt = <1008000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l5a_0p848: l5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <952000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l6a_1p3: l6 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1368000>;
+ regulator-allow-set-load;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l7a_1p2: l7 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l8a_1p8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-system-load = <325000>;
+ regulator-allow-set-load;
+ };
+
+
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1804000>;
+ regulator-max-microvolt = <1896000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l10a_1p8: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1944000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l11a_1p8: l11 {
+ regulator-min-microvolt = <1784000>;
+ regulator-max-microvolt = <1944000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l12a_1p8: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1944000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ /* This gives power to the LPDDR4: never turn it off! */
+ vreg_l13a_1p8: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1944000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_l14a_1p8: l14 {
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l15a_1p8: l15 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ /* L16A (2.70V) is unused */
+
+ vreg_l17a_1p8: l17 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ };
+
+ vreg_l18a_1v8: l18 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <10>;
+ regulator-min-microamp = <200>;
+ regulator-max-microamp = <50000>;
+ regulator-system-load = <10000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l19a_3p3: l19 {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-enable-ramp-delay = <250>;
+ regulator-ramp-delay = <0>;
+ regulator-allow-set-load;
+ };
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <8 4>;
+
+ imx300_vana_default: imx300-vana-default {
+ pins = "gpio50";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ imx219_vana_default: imx219-vana-default {
+ pins = "gpio51";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cam_vdig_default: cam-vdig-default {
+ pins = "gpio52";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+};
--
2.32.0
next prev parent reply other threads:[~2021-07-28 22:26 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210728222542.54269-1-konrad.dybcio@somainline.org>
2021-07-28 22:25 ` [PATCH 01/39] arm64: dts: qcom: sdm630: Rewrite memory map Konrad Dybcio
2021-07-28 22:25 ` [PATCH 02/39] arm64: dts: qcom: sdm630: Add RPMPD nodes Konrad Dybcio
2021-07-28 22:25 ` [PATCH 03/39] arm64: dts: qcom: sdm630: Add MMCC node Konrad Dybcio
2021-07-28 22:25 ` [PATCH 04/39] arm64: dts: qcom: sdm630: Add interconnect provider nodes Konrad Dybcio
2021-08-10 1:02 ` Dmitry Baryshkov
2021-07-28 22:25 ` [PATCH 05/39] arm64: dts: qcom: sdm630: Add MDSS nodes Konrad Dybcio
2021-07-28 22:25 ` [PATCH 06/39] arm64: dts: qcom: sdm630: Add qfprom subnodes Konrad Dybcio
2021-07-28 22:25 ` [PATCH 07/39] arm64: dts: qcom: sdm630: Add USB configuration Konrad Dybcio
2021-07-28 22:25 ` [PATCH 08/39] arm64: dts: qcom: sdm630: Fix TLMM node and pinctrl configuration Konrad Dybcio
2021-07-28 22:25 ` [PATCH 09/39] arm64: dts: qcom: sdm630: Add SDHCI2 node Konrad Dybcio
2021-07-28 22:25 ` [PATCH 10/39] arm64: dts: qcom: sdm630: Add interconnect and opp table to sdhc_1 Konrad Dybcio
2021-07-28 22:25 ` [PATCH 11/39] arm64: dts: qcom: sdm630: Add GPU Clock Controller node Konrad Dybcio
2021-07-28 22:25 ` [PATCH 12/39] arm64: dts: qcom: sdm630: Add clocks and power domains to SMMU nodes Konrad Dybcio
2021-07-28 22:25 ` [PATCH 13/39] arm64: dts: qcom: sdm630: Add qcom,adreno-smmu compatible Konrad Dybcio
2021-07-28 22:25 ` [PATCH 14/39] arm64: dts: qcom: sdm630: Add TSENS node Konrad Dybcio
2021-07-29 10:50 ` Thara Gopinath
2021-07-29 10:52 ` Konrad Dybcio
2021-07-29 10:54 ` Thara Gopinath
2021-07-29 10:55 ` Konrad Dybcio
2021-07-29 11:14 ` Thara Gopinath
2021-07-29 13:48 ` AngeloGioacchino Del Regno
2021-08-24 15:16 ` Bjorn Andersson
2021-08-02 22:39 ` Rob Herring
2021-07-28 22:25 ` [PATCH 15/39] arm64: dts: qcom: sdm630: Add modem/ADSP SMP2P nodes Konrad Dybcio
2021-07-28 22:25 ` [PATCH 16/39] arm64: dts: qcom: sdm630: Add thermal-zones configuration Konrad Dybcio
2021-07-28 22:25 ` [PATCH 17/39] arm64: dts: qcom: sdm630: Add ADSP remoteproc configuration Konrad Dybcio
2021-07-28 22:25 ` [PATCH 18/39] arm64: dts: qcom: sdm630: Raise tcsr_mutex_regs size Konrad Dybcio
2021-07-28 22:25 ` [PATCH 19/39] arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration Konrad Dybcio
2021-07-28 22:25 ` [PATCH 20/39] arm64: dts: qcom: pm660: Support SPMI regulators on PMIC sid 1 Konrad Dybcio
2021-07-28 22:25 ` [PATCH 21/39] arm64: dts: qcom: pm660l: Add WLED support Konrad Dybcio
2021-07-28 22:25 ` [PATCH 22/39] arm64: dts: qcom: pm660l: Support SPMI regulators on PMIC sid 3 Konrad Dybcio
2021-07-28 22:25 ` [PATCH 23/39] arm64: dts: qcom: pm660(l): Add VADC and temp alarm nodes Konrad Dybcio
2021-07-28 22:25 ` [PATCH 24/39] arm64: dts: qcom: sdm660: Make the DTS an overlay on top of 630 Konrad Dybcio
2021-07-28 22:25 ` [PATCH 25/39] arm64: dts: qcom: Add device tree for SDM636 Konrad Dybcio
2021-07-28 22:25 ` [PATCH 26/39] arm64: dts: qcom: sdm630: Add IMEM node Konrad Dybcio
2021-07-28 22:25 ` [PATCH 27/39] arm64: dts: qcom: sdm630: Configure the camera subsystem Konrad Dybcio
2021-07-28 22:25 ` [PATCH 28/39] arm64: dts: qcom: sdm660: Add required nodes for DSI1 Konrad Dybcio
2021-07-28 22:25 ` Konrad Dybcio [this message]
2021-07-28 22:25 ` [PATCH 30/39] arm64: dts: qcom: sdm630-nile: Use &labels Konrad Dybcio
2021-07-28 22:25 ` [PATCH 31/39] arm64: dts: qcom: sdm630-nile: Add USB Konrad Dybcio
2021-07-28 22:25 ` [PATCH 32/39] arm64: dts: qcom: sdm630-nile: Add Volume up key Konrad Dybcio
2021-07-28 22:25 ` [PATCH 33/39] arm64: dts: qcom: sdm630-xperia: Retire sdm630-sony-xperia-ganges.dtsi Konrad Dybcio
2021-07-28 22:25 ` [PATCH 34/39] arm64: dts: qcom: sdm630-nile: Add Synaptics touchscreen Konrad Dybcio
2021-07-28 22:25 ` [PATCH 35/39] arm64: dts: qcom: sdm630-nile: Specify ADSP firmware name Konrad Dybcio
2021-07-28 22:25 ` [PATCH 36/39] arm64: dts: qcom: sdm630-nile: Enable uSD card slot Konrad Dybcio
2021-07-28 22:25 ` [PATCH 37/39] arm64: dts: qcom: sdm630-nile: Remove gpio-keys autorepeat Konrad Dybcio
2021-07-28 22:25 ` [PATCH 38/39] arm64: dts: qcom: sdm630: Add I2C functions to I2C pins Konrad Dybcio
2021-07-28 22:25 ` [PATCH 39/39] arm64: dts: qcom: sdm630: Add DMA to I2C hosts Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210728222542.54269-30-konrad.dybcio@somainline.org \
--to=konrad.dybcio@somainline.org \
--cc=agross@kernel.org \
--cc=angelogioacchino.delregno@somainline.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jamipkettunen@somainline.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=martin.botka@somainline.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.