From: Takashi Iwai <tiwai@suse.de>
To: alsa-devel@alsa-project.org
Subject: [PATCH 3/3] ALSA: pci: cs46xx: Fix set up buffer type properly
Date: Mon, 9 Aug 2021 09:18:29 +0200 [thread overview]
Message-ID: <20210809071829.22238-4-tiwai@suse.de> (raw)
In-Reply-To: <20210809071829.22238-1-tiwai@suse.de>
CS46xx driver switches the buffer depending on the number of periods,
and in some cases it switches to the own buffer without updating the
buffer type properly. This may cause a problem with the mmap on
exotic architectures that require the own mmap call for the coherent
DMA buffer.
This patch addresses the potential breakage by replacing the buffer
setup with the proper macro. It also simplifies the source code,
too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
sound/pci/cs46xx/cs46xx_lib.c | 30 ++++++++----------------------
1 file changed, 8 insertions(+), 22 deletions(-)
diff --git a/sound/pci/cs46xx/cs46xx_lib.c b/sound/pci/cs46xx/cs46xx_lib.c
index 8877afb66704..62f45847b351 100644
--- a/sound/pci/cs46xx/cs46xx_lib.c
+++ b/sound/pci/cs46xx/cs46xx_lib.c
@@ -1121,9 +1121,7 @@ static int snd_cs46xx_playback_hw_params(struct snd_pcm_substream *substream,
if (params_periods(hw_params) == CS46XX_FRAGS) {
if (runtime->dma_area != cpcm->hw_buf.area)
snd_pcm_lib_free_pages(substream);
- runtime->dma_area = cpcm->hw_buf.area;
- runtime->dma_addr = cpcm->hw_buf.addr;
- runtime->dma_bytes = cpcm->hw_buf.bytes;
+ snd_pcm_set_runtime_buffer(substream, &cpcm->hw_buf);
#ifdef CONFIG_SND_CS46XX_NEW_DSP
@@ -1143,11 +1141,8 @@ static int snd_cs46xx_playback_hw_params(struct snd_pcm_substream *substream,
#endif
} else {
- if (runtime->dma_area == cpcm->hw_buf.area) {
- runtime->dma_area = NULL;
- runtime->dma_addr = 0;
- runtime->dma_bytes = 0;
- }
+ if (runtime->dma_area == cpcm->hw_buf.area)
+ snd_pcm_set_runtime_buffer(substream, NULL);
err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
if (err < 0) {
#ifdef CONFIG_SND_CS46XX_NEW_DSP
@@ -1196,9 +1191,7 @@ static int snd_cs46xx_playback_hw_free(struct snd_pcm_substream *substream)
if (runtime->dma_area != cpcm->hw_buf.area)
snd_pcm_lib_free_pages(substream);
- runtime->dma_area = NULL;
- runtime->dma_addr = 0;
- runtime->dma_bytes = 0;
+ snd_pcm_set_runtime_buffer(substream, NULL);
return 0;
}
@@ -1287,16 +1280,11 @@ static int snd_cs46xx_capture_hw_params(struct snd_pcm_substream *substream,
if (runtime->periods == CS46XX_FRAGS) {
if (runtime->dma_area != chip->capt.hw_buf.area)
snd_pcm_lib_free_pages(substream);
- runtime->dma_area = chip->capt.hw_buf.area;
- runtime->dma_addr = chip->capt.hw_buf.addr;
- runtime->dma_bytes = chip->capt.hw_buf.bytes;
+ snd_pcm_set_runtime_buffer(substream, &chip->capt.hw_buf);
substream->ops = &snd_cs46xx_capture_ops;
} else {
- if (runtime->dma_area == chip->capt.hw_buf.area) {
- runtime->dma_area = NULL;
- runtime->dma_addr = 0;
- runtime->dma_bytes = 0;
- }
+ if (runtime->dma_area == chip->capt.hw_buf.area)
+ snd_pcm_set_runtime_buffer(substream, NULL);
err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
if (err < 0)
return err;
@@ -1313,9 +1301,7 @@ static int snd_cs46xx_capture_hw_free(struct snd_pcm_substream *substream)
if (runtime->dma_area != chip->capt.hw_buf.area)
snd_pcm_lib_free_pages(substream);
- runtime->dma_area = NULL;
- runtime->dma_addr = 0;
- runtime->dma_bytes = 0;
+ snd_pcm_set_runtime_buffer(substream, NULL);
return 0;
}
--
2.26.2
prev parent reply other threads:[~2021-08-09 7:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-09 7:18 [PATCH 0/3] ALSA: pcm: More mmap coverages Takashi Iwai
2021-08-09 7:18 ` [PATCH 1/3] ALSA: pcm: Check mmap capability of runtime dma buffer at first Takashi Iwai
2021-08-09 7:18 ` [PATCH 2/3] ALSA: pci: rme: Set up buffer type properly Takashi Iwai
2021-08-09 7:18 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210809071829.22238-4-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.