All of lore.kernel.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Rob Herring <robh+dt@kernel.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Lee Jones <lee.jones@linaro.org>,
	bcousson@baylibre.com, Tony Lindgren <tony@atomide.com>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-input@vger.kernel.org, linux-omap@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>,
	Tero Kristo <kristo@kernel.org>,
	Ryan Barnett <ryan.barnett@collins.com>,
	Grygorii Strashko <grygorii.strashko@ti.com>,
	Jason Reeder <jreeder@ti.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Jonathan Cameron <Jonathan.Cameron@huawei.com>
Subject: [PATCH v2 38/46] iio: adc: ti_am335x_adc: Fix style
Date: Thu,  2 Sep 2021 23:51:36 +0200	[thread overview]
Message-ID: <20210902215144.507243-39-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20210902215144.507243-1-miquel.raynal@bootlin.com>

These warnings are reported by checkpatch.pl essentially.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/iio/adc/ti_am335x_adc.c | 104 ++++++++++++++++----------------
 1 file changed, 52 insertions(+), 52 deletions(-)

diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 7479b3c629e8..cb2ff4eaa35e 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -58,7 +58,7 @@ static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
 }
 
 static void tiadc_writel(struct tiadc_device *adc, unsigned int reg,
-					unsigned int val)
+			 unsigned int val)
 {
 	writel(val, adc->mfd_tscadc->tscadc_base + reg);
 }
@@ -73,7 +73,7 @@ static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
 }
 
 static u32 get_adc_chan_step_mask(struct tiadc_device *adc_dev,
-		struct iio_chan_spec const *chan)
+				  struct iio_chan_spec const *chan)
 {
 	int i;
 
@@ -120,8 +120,6 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 	 * Channel would represent which analog input
 	 * needs to be given to ADC to digitalize data.
 	 */
-
-
 	for (i = 0; i < adc_dev->channels; i++) {
 		int chan;
 
@@ -134,9 +132,8 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 		}
 
 		if (adc_dev->step_avg[i])
-			stepconfig =
-			STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
-			STEPCONFIG_FIFO1;
+			stepconfig = STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
+				     STEPCONFIG_FIFO1;
 		else
 			stepconfig = STEPCONFIG_FIFO1;
 
@@ -144,10 +141,9 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 			stepconfig |= STEPCONFIG_MODE_SWCNT;
 
 		tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
-				stepconfig | STEPCONFIG_INP(chan) |
-				STEPCONFIG_INM_ADCREFM |
-				STEPCONFIG_RFP_VREFP |
-				STEPCONFIG_RFM_VREFN);
+			     stepconfig | STEPCONFIG_INP(chan) |
+			     STEPCONFIG_INM_ADCREFM | STEPCONFIG_RFP_VREFP |
+			     STEPCONFIG_RFM_VREFN);
 
 		if (adc_dev->open_delay[i] > STEPDELAY_OPEN_MASK) {
 			dev_warn(dev, "chan %d open delay truncating to 0x3FFFF\n",
@@ -162,8 +158,8 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 		}
 
 		tiadc_writel(adc_dev, REG_STEPDELAY(steps),
-				STEPDELAY_OPEN(adc_dev->open_delay[i]) |
-				STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
+			     STEPDELAY_OPEN(adc_dev->open_delay[i]) |
+			     STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
 
 		adc_dev->channel_step[i] = steps;
 		steps++;
@@ -188,10 +184,12 @@ static irqreturn_t tiadc_irq_h(int irq, void *private)
 		config = tiadc_readl(adc_dev, REG_CTRL);
 		config &= ~(CNTRLREG_SSENB);
 		tiadc_writel(adc_dev, REG_CTRL, config);
-		tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN
-				| IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
+		tiadc_writel(adc_dev, REG_IRQSTATUS,
+			     IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW |
+			     IRQENB_FIFO1THRES);
 
-		/* wait for idle state.
+		/*
+		 * Wait for the idle state.
 		 * ADC needs to finish the current conversion
 		 * before disabling the module
 		 */
@@ -219,11 +217,11 @@ static irqreturn_t tiadc_worker_h(int irq, void *private)
 
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 	for (k = 0; k < fifo1count; k = k + i) {
-		for (i = 0; i < (indio_dev->scan_bytes)/2; i++) {
+		for (i = 0; i < indio_dev->scan_bytes / 2; i++) {
 			read = tiadc_readl(adc_dev, REG_FIFO1);
 			data[i] = read & FIFOREAD_DATA_MASK;
 		}
-		iio_push_to_buffers(indio_dev, (u8 *) data);
+		iio_push_to_buffers(indio_dev, (u8 *)data);
 	}
 
 	tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES);
@@ -256,6 +254,7 @@ static int tiadc_start_dma(struct iio_dev *indio_dev)
 	struct dma_async_tx_descriptor *desc;
 
 	dma->current_period = 0; /* We start to fill period 0 */
+
 	/*
 	 * Make the fifo thresh as the multiple of total number of
 	 * channels enabled, so make sure that cyclic DMA period
@@ -265,9 +264,10 @@ static int tiadc_start_dma(struct iio_dev *indio_dev)
 	 */
 	dma->fifo_thresh = rounddown(FIFO1_THRESHOLD + 1,
 				     adc_dev->total_ch_enabled) - 1;
+
 	/* Make sure that period length is multiple of fifo thresh level */
 	dma->period_size = rounddown(DMA_BUFFER_SIZE / 2,
-				    (dma->fifo_thresh + 1) * sizeof(u16));
+				     (dma->fifo_thresh + 1) * sizeof(u16));
 
 	dma->conf.src_maxburst = dma->fifo_thresh + 1;
 	dmaengine_slave_config(dma->chan, &dma->conf);
@@ -303,9 +303,9 @@ static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
 	if (ret)
 		return ret;
 
-	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
-				IRQENB_FIFO1OVRRUN |
-				IRQENB_FIFO1UNDRFLW));
+	tiadc_writel(adc_dev, REG_IRQCLR,
+		     IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
+		     IRQENB_FIFO1UNDRFLW);
 
 	/* Flush FIFO. Needed in corner cases in simultaneous tsc/adc use */
 	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
@@ -335,8 +335,9 @@ static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
 
 	am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb);
 
-	tiadc_writel(adc_dev,  REG_IRQSTATUS, IRQENB_FIFO1THRES
-				| IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW);
+	tiadc_writel(adc_dev, REG_IRQSTATUS,
+		     IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
+		     IRQENB_FIFO1UNDRFLW);
 
 	irq_enable = IRQENB_FIFO1OVRRUN;
 	if (!dma->chan)
@@ -352,8 +353,9 @@ static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
 	struct tiadc_dma *dma = &adc_dev->dma;
 	int fifo1count, i;
 
-	tiadc_writel(adc_dev, REG_IRQCLR, (IRQENB_FIFO1THRES |
-				IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW));
+	tiadc_writel(adc_dev, REG_IRQCLR,
+		     IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
+		     IRQENB_FIFO1UNDRFLW);
 	am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
 	adc_dev->buffer_en_ch_steps = 0;
 	adc_dev->total_ch_enabled = 0;
@@ -385,12 +387,11 @@ static const struct iio_buffer_setup_ops tiadc_buffer_setup_ops = {
 };
 
 static int tiadc_iio_buffered_hardware_setup(struct device *dev,
-	struct iio_dev *indio_dev,
-	irqreturn_t (*pollfunc_bh)(int irq, void *p),
-	irqreturn_t (*pollfunc_th)(int irq, void *p),
-	int irq,
-	unsigned long flags,
-	const struct iio_buffer_setup_ops *setup_ops)
+					     struct iio_dev *indio_dev,
+					     irqreturn_t (*pollfunc_bh)(int irq, void *p),
+					     irqreturn_t (*pollfunc_th)(int irq, void *p),
+					     int irq, unsigned long flags,
+					     const struct iio_buffer_setup_ops *setup_ops)
 {
 	struct iio_buffer *buffer;
 	int ret;
@@ -402,7 +403,7 @@ static int tiadc_iio_buffered_hardware_setup(struct device *dev,
 	iio_device_attach_buffer(indio_dev, buffer);
 
 	ret = devm_request_threaded_irq(dev, irq, pollfunc_th, pollfunc_bh,
-				flags, indio_dev->name, indio_dev);
+					flags, indio_dev->name, indio_dev);
 	if (ret)
 		return ret;
 
@@ -434,12 +435,11 @@ static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev,
 	indio_dev->num_channels = channels;
 	chan_array = devm_kcalloc(dev, channels, sizeof(*chan_array),
 				  GFP_KERNEL);
-	if (chan_array == NULL)
+	if (!chan_array)
 		return -ENOMEM;
 
 	chan = chan_array;
 	for (i = 0; i < channels; i++, chan++) {
-
 		chan->type = IIO_VOLTAGE;
 		chan->indexed = 1;
 		chan->channel = adc_dev->channel_line[i];
@@ -457,8 +457,8 @@ static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev,
 }
 
 static int tiadc_read_raw(struct iio_dev *indio_dev,
-		struct iio_chan_spec const *chan,
-		int *val, int *val2, long mask)
+			  struct iio_chan_spec const *chan, int *val, int *val2,
+			  long mask)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
 	int i, map_val;
@@ -487,9 +487,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 
 	am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
 
-	timeout = jiffies + msecs_to_jiffies
-				(IDLE_TIMEOUT * adc_dev->channels);
 	/* Wait for Fifo threshold interrupt */
+	timeout = jiffies + msecs_to_jiffies(IDLE_TIMEOUT * adc_dev->channels);
 	while (1) {
 		fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
 		if (fifo1count)
@@ -501,6 +500,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 			goto err_unlock;
 		}
 	}
+
 	map_val = adc_dev->channel_step[chan->scan_index];
 
 	/*
@@ -518,13 +518,14 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 		if (stepid == map_val) {
 			read = read & FIFOREAD_DATA_MASK;
 			found = true;
-			*val = (u16) read;
+			*val = (u16)read;
 		}
 	}
+
 	am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
 
 	if (!found)
-		ret =  -EBUSY;
+		ret = -EBUSY;
 
 err_unlock:
 	mutex_unlock(&adc_dev->fifo1_lock);
@@ -565,6 +566,7 @@ static int tiadc_request_dma(struct platform_device *pdev,
 		goto err;
 
 	return 0;
+
 err:
 	dma_release_channel(dma->chan);
 	return -ENOMEM;
@@ -614,7 +616,7 @@ static int tiadc_probe(struct platform_device *pdev)
 	}
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
-	if (indio_dev == NULL) {
+	if (!indio_dev) {
 		dev_err(&pdev->dev, "failed to allocate iio device\n");
 		return -ENOMEM;
 	}
@@ -636,12 +638,11 @@ static int tiadc_probe(struct platform_device *pdev)
 		return err;
 
 	err = tiadc_iio_buffered_hardware_setup(&pdev->dev, indio_dev,
-		&tiadc_worker_h,
-		&tiadc_irq_h,
-		adc_dev->mfd_tscadc->irq,
-		IRQF_SHARED,
-		&tiadc_buffer_setup_ops);
-
+						&tiadc_worker_h,
+						&tiadc_irq_h,
+						adc_dev->mfd_tscadc->irq,
+						IRQF_SHARED,
+						&tiadc_buffer_setup_ops);
 	if (err)
 		goto err_free_channels;
 
@@ -692,8 +693,7 @@ static int __maybe_unused tiadc_suspend(struct device *dev)
 
 	idle = tiadc_readl(adc_dev, REG_CTRL);
 	idle &= ~(CNTRLREG_SSENB);
-	tiadc_writel(adc_dev, REG_CTRL, (idle |
-			CNTRLREG_POWERDOWN));
+	tiadc_writel(adc_dev, REG_CTRL, idle | CNTRLREG_POWERDOWN);
 
 	return 0;
 }
@@ -706,12 +706,12 @@ static int __maybe_unused tiadc_resume(struct device *dev)
 
 	/* Make sure ADC is powered up */
 	restore = tiadc_readl(adc_dev, REG_CTRL);
-	restore &= ~(CNTRLREG_POWERDOWN);
+	restore &= ~CNTRLREG_POWERDOWN;
 	tiadc_writel(adc_dev, REG_CTRL, restore);
 
 	tiadc_step_config(indio_dev);
 	am335x_tsc_se_set_cache(adc_dev->mfd_tscadc,
-			adc_dev->buffer_en_ch_steps);
+				adc_dev->buffer_en_ch_steps);
 	return 0;
 }
 
-- 
2.27.0


  parent reply	other threads:[~2021-09-02 21:53 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-02 21:50 [PATCH v2 00/46] TI AM437X ADC1 Miquel Raynal
2021-09-02 21:50 ` [PATCH v2 01/46] clk: ti: am43xx: Add clkctrl data for am43xx ADC1 Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 02/46] dt-bindings: mfd: ti,am3359-tscadc: Add a yaml description for this MFD Miquel Raynal
2021-09-03 16:05   ` Rob Herring
2021-09-05 11:57   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 03/46] dt-bindings: touchscreen: ti,am3359-tsc: New yaml description Miquel Raynal
2021-09-03 16:06   ` Rob Herring
2021-09-05 11:59   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 04/46] dt-bindings: iio: adc: ti,am3359-adc: " Miquel Raynal
2021-09-03 16:07   ` Rob Herring
2021-09-02 21:51 ` [PATCH v2 05/46] dt-bindings: touchscreen: ti,am3359-tsc: Remove deprecated text file Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 06/46] dt-bindings: mfd: ti,am3359-tscadc: Describe am4372 MFD compatible Miquel Raynal
2021-09-05 12:01   ` Jonathan Cameron
2021-09-07 19:04   ` Rob Herring
2021-09-02 21:51 ` [PATCH v2 07/46] dt-bindings: iio: adc: ti,am3359-adc: Describe am4372 ADC compatible Miquel Raynal
2021-09-07 19:05   ` Rob Herring
2021-09-02 21:51 ` [PATCH v2 08/46] mfd: ti_am335x_tscadc: Replace license text with SPDX tag Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 09/46] mfd: ti_am335x_tscadc: Fix style Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 10/46] mfd: ti_am335x_tscadc: Drop extra spacing when declaring stack variables Miquel Raynal
2021-09-05 12:03   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 11/46] mfd: ti_am335x_tscadc: Ensure a balanced number of node get/put Miquel Raynal
2021-09-05 12:06   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 12/46] mfd: ti_am335x_tscadc: Get rid of useless gotos Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 13/46] mfd: ti_am335x_tscadc: Reword the comment explaining the dividers Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 14/46] mfd: ti_am335x_tscadc: Don't search the tree for our clock Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 15/46] mfd: ti_am335x_tscadc: Simplify divisor calculation Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 16/46] mfd: ti_am335x_tscadc: Move the driver structure allocation earlier Miquel Raynal
2021-09-05 12:09   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 17/46] mfd: ti_am335x_tscadc: Use driver data Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 18/46] mfd: ti_am335x_tscadc: Mimic the probe from resume() Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 19/46] mfd: ti_am335x_tscadc: Drop useless variables from the driver structure Miquel Raynal
2021-09-05 12:11   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 20/46] mfd: ti_am335x_tscadc: Always provide an idle configuration Miquel Raynal
2021-09-05 12:13   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 21/46] mfd: ti_am335x_tscadc: Reorder the initialization steps Miquel Raynal
2021-09-05 12:18   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 22/46] mfd: ti_am335x_tscadc: Gather the ctrl register logic in one place Miquel Raynal
2021-09-05 12:20   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 23/46] mfd: ti_am335x_tscadc: Replace the header license text with SPDX tag Miquel Raynal
2021-09-05 12:21   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 24/46] mfd: ti_am335x_tscadc: Fix header spacing Miquel Raynal
2021-09-05 12:22   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 25/46] mfd: ti_am335x_tscadc: Use BIT() and GENMASK() when relevant in the header Miquel Raynal
2021-09-05 13:09   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 26/46] mfd: ti_am335x_tscadc: Use FIELD_PREP() " Miquel Raynal
2021-09-05 13:13   ` Jonathan Cameron
2021-09-15  7:48     ` Miquel Raynal
2021-09-19 15:49       ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 27/46] mfd: ti_am335x_tscadc: Rename the subsystem enable macro Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 28/46] mfd: ti_am335x_tscadc: Add TSC prefix in certain macros Miquel Raynal
2021-09-05 13:15   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 29/46] mfd: ti_am335x_tscadc: Rename a variable Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 30/46] mfd: ti_am335x_tscadc: Fix an error message Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 31/46] mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a touchscreen Miquel Raynal
2021-09-05 13:17   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 32/46] mfd: ti_am335x_tscadc: Introduce has_tsc Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 33/46] mfd: ti_am335x_tscadc: Move control register configuration Miquel Raynal
2021-09-03 13:24   ` Grygorii Strashko
2021-09-05 13:18     ` Jonathan Cameron
2021-09-05 13:22       ` Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 34/46] mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support Miquel Raynal
2021-09-05 13:23   ` Jonathan Cameron
2021-09-14 18:25     ` Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 35/46] mfd: ti_am335x_tscadc: Support the correctly spelled DT property Miquel Raynal
2021-09-05 13:24   ` Jonathan Cameron
2021-09-02 21:51 ` [PATCH v2 36/46] iio: adc: ti_am335x_adc: Wait the idle state to avoid stalls Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 37/46] iio: adc: ti_am335x_adc: Replace license text with SPDX tag Miquel Raynal
2021-09-02 21:51 ` Miquel Raynal [this message]
2021-09-02 21:51 ` [PATCH v2 39/46] iio: adc: ti_am335x_adc: Get rid of useless gotos Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 40/46] iio: adc: ti_am335x_adc: Gather the checks on the delays Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 41/46] iio: adc: ti_am335x_adc: Add a unit to the timeout delay Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 42/46] iio: adc: ti_am335x_adc: Add the scale information Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 43/46] iio: adc: ti_am335x_adc: Add the am437x compatible Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 44/46] ARM: dts: am437x-cm-t43: Use a correctly spelled DT property Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 45/46] ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module Miquel Raynal
2021-09-02 22:17   ` Miquel Raynal
2021-09-02 21:51 ` [PATCH v2 46/46] ARM: dts: am437x-gp-evm: enable ADC1 Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210902215144.507243-39-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=jic23@kernel.org \
    --cc=jreeder@ti.com \
    --cc=kristo@kernel.org \
    --cc=lars@metafoo.de \
    --cc=lee.jones@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --cc=ryan.barnett@collins.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.