From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Jonathan Marek <jonathan@marek.ca>,
Stephen Boyd <sboyd@kernel.org>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
freedreno@lists.freedesktop.org
Subject: [PATCH 1/2] drm/msm/hdmi: use bulk regulator API
Date: Fri, 15 Oct 2021 03:10:59 +0300 [thread overview]
Message-ID: <20211015001100.4193241-1-dmitry.baryshkov@linaro.org> (raw)
Switch to using bulk regulator API instead of hand coding loops.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/gpu/drm/msm/hdmi/hdmi.c | 34 +++++++----------------
drivers/gpu/drm/msm/hdmi/hdmi.h | 6 ++--
drivers/gpu/drm/msm/hdmi/hdmi_bridge.c | 20 ++++---------
drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 24 ++++++----------
drivers/gpu/drm/msm/hdmi/hdmi_phy.c | 33 ++++++++--------------
5 files changed, 40 insertions(+), 77 deletions(-)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 737453b6e596..db17a000d968 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -154,19 +154,13 @@ static struct hdmi *msm_hdmi_init(struct platform_device *pdev)
ret = -ENOMEM;
goto fail;
}
- for (i = 0; i < config->hpd_reg_cnt; i++) {
- struct regulator *reg;
-
- reg = devm_regulator_get(&pdev->dev,
- config->hpd_reg_names[i]);
- if (IS_ERR(reg)) {
- ret = PTR_ERR(reg);
- DRM_DEV_ERROR(&pdev->dev, "failed to get hpd regulator: %s (%d)\n",
- config->hpd_reg_names[i], ret);
- goto fail;
- }
+ for (i = 0; i < config->hpd_reg_cnt; i++)
+ hdmi->hpd_regs[i].supply = config->hpd_reg_names[i];
- hdmi->hpd_regs[i] = reg;
+ ret = devm_regulator_bulk_get(&pdev->dev, config->hpd_reg_cnt, hdmi->hpd_regs);
+ if (ret) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to get hpd regulator: %d\n", ret);
+ goto fail;
}
hdmi->pwr_regs = devm_kcalloc(&pdev->dev,
@@ -177,19 +171,11 @@ static struct hdmi *msm_hdmi_init(struct platform_device *pdev)
ret = -ENOMEM;
goto fail;
}
- for (i = 0; i < config->pwr_reg_cnt; i++) {
- struct regulator *reg;
- reg = devm_regulator_get(&pdev->dev,
- config->pwr_reg_names[i]);
- if (IS_ERR(reg)) {
- ret = PTR_ERR(reg);
- DRM_DEV_ERROR(&pdev->dev, "failed to get pwr regulator: %s (%d)\n",
- config->pwr_reg_names[i], ret);
- goto fail;
- }
-
- hdmi->pwr_regs[i] = reg;
+ ret = devm_regulator_bulk_get(&pdev->dev, config->pwr_reg_cnt, hdmi->pwr_regs);
+ if (ret) {
+ DRM_DEV_ERROR(&pdev->dev, "failed to get pwr regulator: %d\n", ret);
+ goto fail;
}
hdmi->hpd_clks = devm_kcalloc(&pdev->dev,
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index d0b84f0abee1..82261078c6b1 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -56,8 +56,8 @@ struct hdmi {
void __iomem *qfprom_mmio;
phys_addr_t mmio_phy_addr;
- struct regulator **hpd_regs;
- struct regulator **pwr_regs;
+ struct regulator_bulk_data *hpd_regs;
+ struct regulator_bulk_data *pwr_regs;
struct clk **hpd_clks;
struct clk **pwr_clks;
@@ -163,7 +163,7 @@ struct hdmi_phy {
void __iomem *mmio;
struct hdmi_phy_cfg *cfg;
const struct hdmi_phy_funcs *funcs;
- struct regulator **regs;
+ struct regulator_bulk_data *regs;
struct clk **clks;
};
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
index 6e380db9287b..f04eb4a70f0d 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
@@ -28,13 +28,9 @@ static void msm_hdmi_power_on(struct drm_bridge *bridge)
pm_runtime_get_sync(&hdmi->pdev->dev);
- for (i = 0; i < config->pwr_reg_cnt; i++) {
- ret = regulator_enable(hdmi->pwr_regs[i]);
- if (ret) {
- DRM_DEV_ERROR(dev->dev, "failed to enable pwr regulator: %s (%d)\n",
- config->pwr_reg_names[i], ret);
- }
- }
+ ret = regulator_bulk_enable(config->pwr_reg_cnt, hdmi->pwr_regs);
+ if (ret)
+ DRM_DEV_ERROR(dev->dev, "failed to enable pwr regulator: %d\n", ret);
if (config->pwr_clk_cnt > 0) {
DBG("pixclock: %lu", hdmi->pixclock);
@@ -70,13 +66,9 @@ static void power_off(struct drm_bridge *bridge)
for (i = 0; i < config->pwr_clk_cnt; i++)
clk_disable_unprepare(hdmi->pwr_clks[i]);
- for (i = 0; i < config->pwr_reg_cnt; i++) {
- ret = regulator_disable(hdmi->pwr_regs[i]);
- if (ret) {
- DRM_DEV_ERROR(dev->dev, "failed to disable pwr regulator: %s (%d)\n",
- config->pwr_reg_names[i], ret);
- }
- }
+ ret = regulator_bulk_disable(config->pwr_reg_cnt, hdmi->pwr_regs);
+ if (ret)
+ DRM_DEV_ERROR(dev->dev, "failed to disable pwr regulator: %d\n", ret);
pm_runtime_put_autosuspend(&hdmi->pdev->dev);
}
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
index 58707a1f3878..a7f729cdec7b 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
@@ -146,16 +146,13 @@ int msm_hdmi_hpd_enable(struct drm_connector *connector)
const struct hdmi_platform_config *config = hdmi->config;
struct device *dev = &hdmi->pdev->dev;
uint32_t hpd_ctrl;
- int i, ret;
+ int ret;
unsigned long flags;
- for (i = 0; i < config->hpd_reg_cnt; i++) {
- ret = regulator_enable(hdmi->hpd_regs[i]);
- if (ret) {
- DRM_DEV_ERROR(dev, "failed to enable hpd regulator: %s (%d)\n",
- config->hpd_reg_names[i], ret);
- goto fail;
- }
+ ret = regulator_bulk_enable(config->hpd_reg_cnt, hdmi->hpd_regs);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "failed to enable hpd regulators: %d\n", ret);
+ goto fail;
}
ret = pinctrl_pm_select_default_state(dev);
@@ -207,7 +204,7 @@ static void hdp_disable(struct hdmi_connector *hdmi_connector)
struct hdmi *hdmi = hdmi_connector->hdmi;
const struct hdmi_platform_config *config = hdmi->config;
struct device *dev = &hdmi->pdev->dev;
- int i, ret = 0;
+ int ret;
/* Disable HPD interrupt */
hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL, 0);
@@ -225,12 +222,9 @@ static void hdp_disable(struct hdmi_connector *hdmi_connector)
if (ret)
dev_warn(dev, "pinctrl state chg failed: %d\n", ret);
- for (i = 0; i < config->hpd_reg_cnt; i++) {
- ret = regulator_disable(hdmi->hpd_regs[i]);
- if (ret)
- dev_warn(dev, "failed to disable hpd regulator: %s (%d)\n",
- config->hpd_reg_names[i], ret);
- }
+ ret = regulator_bulk_disable(config->hpd_reg_cnt, hdmi->hpd_regs);
+ if (ret)
+ dev_warn(dev, "failed to disable hpd regulator: %d\n", ret);
}
static void
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
index 8a38d4b95102..16b0e8836d27 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
@@ -23,22 +23,15 @@ static int msm_hdmi_phy_resource_init(struct hdmi_phy *phy)
if (!phy->clks)
return -ENOMEM;
- for (i = 0; i < cfg->num_regs; i++) {
- struct regulator *reg;
-
- reg = devm_regulator_get(dev, cfg->reg_names[i]);
- if (IS_ERR(reg)) {
- ret = PTR_ERR(reg);
- if (ret != -EPROBE_DEFER) {
- DRM_DEV_ERROR(dev,
- "failed to get phy regulator: %s (%d)\n",
- cfg->reg_names[i], ret);
- }
+ for (i = 0; i < cfg->num_regs; i++)
+ phy->regs[i].supply = cfg->reg_names[i];
- return ret;
- }
+ ret = devm_regulator_bulk_get(dev, cfg->num_regs, phy->regs);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ DRM_DEV_ERROR(dev, "failed to get phy regulators: %d\n", ret);
- phy->regs[i] = reg;
+ return ret;
}
for (i = 0; i < cfg->num_clks; i++) {
@@ -66,11 +59,10 @@ int msm_hdmi_phy_resource_enable(struct hdmi_phy *phy)
pm_runtime_get_sync(dev);
- for (i = 0; i < cfg->num_regs; i++) {
- ret = regulator_enable(phy->regs[i]);
- if (ret)
- DRM_DEV_ERROR(dev, "failed to enable regulator: %s (%d)\n",
- cfg->reg_names[i], ret);
+ ret = regulator_bulk_enable(cfg->num_regs, phy->regs);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "failed to enable regulators: (%d)\n", ret);
+ return ret;
}
for (i = 0; i < cfg->num_clks; i++) {
@@ -92,8 +84,7 @@ void msm_hdmi_phy_resource_disable(struct hdmi_phy *phy)
for (i = cfg->num_clks - 1; i >= 0; i--)
clk_disable_unprepare(phy->clks[i]);
- for (i = cfg->num_regs - 1; i >= 0; i--)
- regulator_disable(phy->regs[i]);
+ regulator_bulk_disable(cfg->num_regs, phy->regs);
pm_runtime_put_sync(dev);
}
--
2.33.0
next reply other threads:[~2021-10-15 0:11 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-15 0:10 Dmitry Baryshkov [this message]
2021-10-15 0:11 ` [PATCH 2/2] drm/msm/hdmi: switch to drm_bridge_connector Dmitry Baryshkov
2021-10-15 22:25 ` [Freedreno] " abhinavk
2021-10-16 14:21 ` Dmitry Baryshkov
2021-10-18 23:54 ` abhinavk
2021-11-25 12:50 ` Dmitry Baryshkov
2021-11-25 12:50 ` Dmitry Baryshkov
2021-12-06 20:42 ` Abhinav Kumar
2021-12-06 20:42 ` Abhinav Kumar
2021-12-06 22:47 ` Dmitry Baryshkov
2021-12-06 22:47 ` Dmitry Baryshkov
2021-12-06 22:58 ` Abhinav Kumar
2021-12-06 22:58 ` Abhinav Kumar
2021-12-07 0:21 ` Dmitry Baryshkov
2021-12-07 0:21 ` Dmitry Baryshkov
2021-12-07 0:26 ` Abhinav Kumar
2021-12-07 0:26 ` Abhinav Kumar
2021-10-15 19:46 ` [PATCH 1/2] drm/msm/hdmi: use bulk regulator API Stephen Boyd
2021-10-15 22:16 ` [Freedreno] " abhinavk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211015001100.4193241-1-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=abhinavk@codeaurora.org \
--cc=airlied@linux.ie \
--cc=bjorn.andersson@linaro.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jonathan@marek.ca \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=sboyd@kernel.org \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.