From: Stefan Roese <sr@denx.de>
To: linux-pci@vger.kernel.org
Cc: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
"Bjorn Helgaas" <helgaas@kernel.org>,
"Pali Rohár" <pali@kernel.org>,
"Bharat Kumar Gogada" <bharat.kumar.gogada@xilinx.com>,
"Michal Simek" <michal.simek@xilinx.com>,
"Yao Hongbo" <yaohongbo@linux.alibaba.com>,
"Naveen Naidu" <naveennaidu479@gmail.com>
Subject: [PATCH v2 1/2] PCI/portdrv: Don't disable AER reporting in get_port_device_capability()
Date: Mon, 17 Jan 2022 09:03:47 +0100 [thread overview]
Message-ID: <20220117080348.2757180-2-sr@denx.de> (raw)
In-Reply-To: <20220117080348.2757180-1-sr@denx.de>
Testing has shown, that AER reporting is currently disabled in the
DevCtl registers of all non Root Port PCIe devices on systems using
pcie_ports_native || host->native_aer. Practically disabling AER
completely in such systems. This is due to the fact that with commit
2bd50dd800b5 ("PCI: PCIe: Disable PCIe port services during port
initialization"), a call to pci_disable_pcie_error_reporting() was
added *after* the PCIe AER setup was completed for the PCIe device
tree.
Here a longer analysis about the currect status of AER enaling /
disabling upon bootup provided by Bjorn:
pcie_portdrv_probe
pcie_port_device_register
get_port_device_capability
pci_disable_pcie_error_reporting
clear CERE NFERE FERE URRE # <-- disable for RP USP DSP
pcie_device_init
device_register # new AER service device
aer_probe
aer_enable_rootport # RP only
set_downstream_devices_error_reporting
set_device_error_reporting # self (RP)
if (RP || USP || DSP)
pci_enable_pcie_error_reporting
set CERE NFERE FERE URRE # <-- enable for RP
pci_walk_bus
set_device_error_reporting
if (RP || USP || DSP)
pci_enable_pcie_error_reporting
set CERE NFERE FERE URRE # <-- enable for USP DSP
In a typical Root Port -> Endpoint hierarchy, the above:
- Disables Error Reporting for the Root Port,
- Enables Error Reporting for the Root Port,
- Does NOT enable Error Reporting for the Endpoint because it is not
a Root Port or Switch Port.
In a deeper Root Port -> Upstream Switch Port -> Downstream Switch
Port -> Endpoint hierarchy:
- Disables Error Reporting for the Root Port,
- Enables Error Reporting for the Root Port,
- Enables Error Reporting for both Switch Ports,
- Does NOT enable Error Reporting for the Endpoint because it is not
a Root Port or Switch Port,
- Disables Error Reporting for the Switch Ports when
pcie_portdrv_probe() claims them. AER does not re-enable it
because these are not Root Ports.
This patch now removes this call to pci_disable_pcie_error_reporting()
from get_port_device_capability(), leaving the already enabled AER
configuration intact. With this change, AER is enabled in the Root Port
and the PCIe switch upstream and downstream ports. Only the PCIe
Endpoints don't have AER enabled yet. A follow-up patch will take
care of this Endpoint enabling.
Fixes: 2bd50dd800b5 ("PCI: PCIe: Disable PCIe port services during port initialization")
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Pali Rohár <pali@kernel.org>
Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yao Hongbo <yaohongbo@linux.alibaba.com>
Cc: Naveen Naidu <naveennaidu479@gmail.com>
---
v2:
- Enhance commit message as suggested by Bjorn
drivers/pci/pcie/portdrv_core.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index f81c7be4d7d8..27b990cedb4c 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -244,15 +244,8 @@ static int get_port_device_capability(struct pci_dev *dev)
#ifdef CONFIG_PCIEAER
if (dev->aer_cap && pci_aer_available() &&
- (pcie_ports_native || host->native_aer)) {
+ (pcie_ports_native || host->native_aer))
services |= PCIE_PORT_SERVICE_AER;
-
- /*
- * Disable AER on this port in case it's been enabled by the
- * BIOS (the AER service driver will enable it when necessary).
- */
- pci_disable_pcie_error_reporting(dev);
- }
#endif
/* Root Ports and Root Complex Event Collectors may generate PMEs */
--
2.34.1
next prev parent reply other threads:[~2022-01-17 8:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-17 8:03 [PATCH v2 0/2] Fully enable AER Stefan Roese
2022-01-17 8:03 ` Stefan Roese [this message]
2022-01-17 9:21 ` [PATCH v2 1/2] PCI/portdrv: Don't disable AER reporting in get_port_device_capability() Pali Rohár
2022-01-17 8:03 ` [PATCH v2 2/2] PCI/AER: Enable AER on Endpoints as well Stefan Roese
2022-01-17 9:30 ` Pali Rohár
2022-01-17 9:39 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220117080348.2757180-2-sr@denx.de \
--to=sr@denx.de \
--cc=bharat.kumar.gogada@xilinx.com \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=naveennaidu479@gmail.com \
--cc=pali@kernel.org \
--cc=rjw@rjwysocki.net \
--cc=yaohongbo@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.