From: Hangbin Liu <liuhangbin@gmail.com>
To: netdev@vger.kernel.org
Cc: Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Andrii Nakryiko <andrii@kernel.org>,
bpf@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>,
"David S . Miller" <davem@davemloft.net>,
Mathieu Xhonneux <m.xhonneux@gmail.com>,
Lorenz Bauer <lmb@cloudflare.com>,
William Tu <u9012063@gmail.com>,
Toshiaki Makita <toshiaki.makita1@gmail.com>,
Jesper Dangaard Brouer <brouer@redhat.com>,
Hangbin Liu <liuhangbin@gmail.com>
Subject: [PATCH bpf 4/7] selftests/bpf/test_lwt_seg6local: use temp netns for testing
Date: Tue, 25 Jan 2022 16:17:14 +0800 [thread overview]
Message-ID: <20220125081717.1260849-5-liuhangbin@gmail.com> (raw)
In-Reply-To: <20220125081717.1260849-1-liuhangbin@gmail.com>
Use temp netns instead of hard code name for testing in case the
netns already exists.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
.../selftests/bpf/test_lwt_seg6local.sh | 170 +++++++++---------
1 file changed, 88 insertions(+), 82 deletions(-)
diff --git a/tools/testing/selftests/bpf/test_lwt_seg6local.sh b/tools/testing/selftests/bpf/test_lwt_seg6local.sh
index 5620919fde9e..826f4423ce02 100755
--- a/tools/testing/selftests/bpf/test_lwt_seg6local.sh
+++ b/tools/testing/selftests/bpf/test_lwt_seg6local.sh
@@ -23,6 +23,12 @@
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
+readonly NS1="ns1-$(mktemp -u XXXXXX)"
+readonly NS2="ns2-$(mktemp -u XXXXXX)"
+readonly NS3="ns3-$(mktemp -u XXXXXX)"
+readonly NS4="ns4-$(mktemp -u XXXXXX)"
+readonly NS5="ns5-$(mktemp -u XXXXXX)"
+readonly NS6="ns6-$(mktemp -u XXXXXX)"
msg="skip all tests:"
if [ $UID != 0 ]; then
@@ -41,23 +47,23 @@ cleanup()
fi
set +e
- ip netns del ns1 2> /dev/null
- ip netns del ns2 2> /dev/null
- ip netns del ns3 2> /dev/null
- ip netns del ns4 2> /dev/null
- ip netns del ns5 2> /dev/null
- ip netns del ns6 2> /dev/null
+ ip netns del ${NS1} 2> /dev/null
+ ip netns del ${NS2} 2> /dev/null
+ ip netns del ${NS3} 2> /dev/null
+ ip netns del ${NS4} 2> /dev/null
+ ip netns del ${NS5} 2> /dev/null
+ ip netns del ${NS6} 2> /dev/null
rm -f $TMP_FILE
}
set -e
-ip netns add ns1
-ip netns add ns2
-ip netns add ns3
-ip netns add ns4
-ip netns add ns5
-ip netns add ns6
+ip netns add ${NS1}
+ip netns add ${NS2}
+ip netns add ${NS3}
+ip netns add ${NS4}
+ip netns add ${NS5}
+ip netns add ${NS6}
trap cleanup 0 2 3 6 9
@@ -67,78 +73,78 @@ ip link add veth5 type veth peer name veth6
ip link add veth7 type veth peer name veth8
ip link add veth9 type veth peer name veth10
-ip link set veth1 netns ns1
-ip link set veth2 netns ns2
-ip link set veth3 netns ns2
-ip link set veth4 netns ns3
-ip link set veth5 netns ns3
-ip link set veth6 netns ns4
-ip link set veth7 netns ns4
-ip link set veth8 netns ns5
-ip link set veth9 netns ns5
-ip link set veth10 netns ns6
-
-ip netns exec ns1 ip link set dev veth1 up
-ip netns exec ns2 ip link set dev veth2 up
-ip netns exec ns2 ip link set dev veth3 up
-ip netns exec ns3 ip link set dev veth4 up
-ip netns exec ns3 ip link set dev veth5 up
-ip netns exec ns4 ip link set dev veth6 up
-ip netns exec ns4 ip link set dev veth7 up
-ip netns exec ns5 ip link set dev veth8 up
-ip netns exec ns5 ip link set dev veth9 up
-ip netns exec ns6 ip link set dev veth10 up
-ip netns exec ns6 ip link set dev lo up
+ip link set veth1 netns ${NS1}
+ip link set veth2 netns ${NS2}
+ip link set veth3 netns ${NS2}
+ip link set veth4 netns ${NS3}
+ip link set veth5 netns ${NS3}
+ip link set veth6 netns ${NS4}
+ip link set veth7 netns ${NS4}
+ip link set veth8 netns ${NS5}
+ip link set veth9 netns ${NS5}
+ip link set veth10 netns ${NS6}
+
+ip netns exec ${NS1} ip link set dev veth1 up
+ip netns exec ${NS2} ip link set dev veth2 up
+ip netns exec ${NS2} ip link set dev veth3 up
+ip netns exec ${NS3} ip link set dev veth4 up
+ip netns exec ${NS3} ip link set dev veth5 up
+ip netns exec ${NS4} ip link set dev veth6 up
+ip netns exec ${NS4} ip link set dev veth7 up
+ip netns exec ${NS5} ip link set dev veth8 up
+ip netns exec ${NS5} ip link set dev veth9 up
+ip netns exec ${NS6} ip link set dev veth10 up
+ip netns exec ${NS6} ip link set dev lo up
# All link scope addresses and routes required between veths
-ip netns exec ns1 ip -6 addr add fb00::12/16 dev veth1 scope link
-ip netns exec ns1 ip -6 route add fb00::21 dev veth1 scope link
-ip netns exec ns2 ip -6 addr add fb00::21/16 dev veth2 scope link
-ip netns exec ns2 ip -6 addr add fb00::34/16 dev veth3 scope link
-ip netns exec ns2 ip -6 route add fb00::43 dev veth3 scope link
-ip netns exec ns3 ip -6 route add fb00::65 dev veth5 scope link
-ip netns exec ns3 ip -6 addr add fb00::43/16 dev veth4 scope link
-ip netns exec ns3 ip -6 addr add fb00::56/16 dev veth5 scope link
-ip netns exec ns4 ip -6 addr add fb00::65/16 dev veth6 scope link
-ip netns exec ns4 ip -6 addr add fb00::78/16 dev veth7 scope link
-ip netns exec ns4 ip -6 route add fb00::87 dev veth7 scope link
-ip netns exec ns5 ip -6 addr add fb00::87/16 dev veth8 scope link
-ip netns exec ns5 ip -6 addr add fb00::910/16 dev veth9 scope link
-ip netns exec ns5 ip -6 route add fb00::109 dev veth9 scope link
-ip netns exec ns5 ip -6 route add fb00::109 table 117 dev veth9 scope link
-ip netns exec ns6 ip -6 addr add fb00::109/16 dev veth10 scope link
-
-ip netns exec ns1 ip -6 addr add fb00::1/16 dev lo
-ip netns exec ns1 ip -6 route add fb00::6 dev veth1 via fb00::21
-
-ip netns exec ns2 ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2
-ip netns exec ns2 ip -6 route add fd00::1 dev veth3 via fb00::43 scope link
-
-ip netns exec ns3 ip -6 route add fc42::1 dev veth5 via fb00::65
-ip netns exec ns3 ip -6 route add fd00::1 encap seg6local action End.BPF endpoint obj test_lwt_seg6local.o sec add_egr_x dev veth4
-
-ip netns exec ns4 ip -6 route add fd00::2 encap seg6local action End.BPF endpoint obj test_lwt_seg6local.o sec pop_egr dev veth6
-ip netns exec ns4 ip -6 addr add fc42::1 dev lo
-ip netns exec ns4 ip -6 route add fd00::3 dev veth7 via fb00::87
-
-ip netns exec ns5 ip -6 route add fd00::4 table 117 dev veth9 via fb00::109
-ip netns exec ns5 ip -6 route add fd00::3 encap seg6local action End.BPF endpoint obj test_lwt_seg6local.o sec inspect_t dev veth8
-
-ip netns exec ns6 ip -6 addr add fb00::6/16 dev lo
-ip netns exec ns6 ip -6 addr add fd00::4/16 dev lo
-
-ip netns exec ns1 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
-ip netns exec ns2 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
-ip netns exec ns3 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
-ip netns exec ns4 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
-ip netns exec ns5 sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
-
-ip netns exec ns6 sysctl net.ipv6.conf.all.seg6_enabled=1 > /dev/null
-ip netns exec ns6 sysctl net.ipv6.conf.lo.seg6_enabled=1 > /dev/null
-ip netns exec ns6 sysctl net.ipv6.conf.veth10.seg6_enabled=1 > /dev/null
-
-ip netns exec ns6 nc -l -6 -u -d 7330 > $TMP_FILE &
-ip netns exec ns1 bash -c "echo 'foobar' | nc -w0 -6 -u -p 2121 -s fb00::1 fb00::6 7330"
+ip netns exec ${NS1} ip -6 addr add fb00::12/16 dev veth1 scope link
+ip netns exec ${NS1} ip -6 route add fb00::21 dev veth1 scope link
+ip netns exec ${NS2} ip -6 addr add fb00::21/16 dev veth2 scope link
+ip netns exec ${NS2} ip -6 addr add fb00::34/16 dev veth3 scope link
+ip netns exec ${NS2} ip -6 route add fb00::43 dev veth3 scope link
+ip netns exec ${NS3} ip -6 route add fb00::65 dev veth5 scope link
+ip netns exec ${NS3} ip -6 addr add fb00::43/16 dev veth4 scope link
+ip netns exec ${NS3} ip -6 addr add fb00::56/16 dev veth5 scope link
+ip netns exec ${NS4} ip -6 addr add fb00::65/16 dev veth6 scope link
+ip netns exec ${NS4} ip -6 addr add fb00::78/16 dev veth7 scope link
+ip netns exec ${NS4} ip -6 route add fb00::87 dev veth7 scope link
+ip netns exec ${NS5} ip -6 addr add fb00::87/16 dev veth8 scope link
+ip netns exec ${NS5} ip -6 addr add fb00::910/16 dev veth9 scope link
+ip netns exec ${NS5} ip -6 route add fb00::109 dev veth9 scope link
+ip netns exec ${NS5} ip -6 route add fb00::109 table 117 dev veth9 scope link
+ip netns exec ${NS6} ip -6 addr add fb00::109/16 dev veth10 scope link
+
+ip netns exec ${NS1} ip -6 addr add fb00::1/16 dev lo
+ip netns exec ${NS1} ip -6 route add fb00::6 dev veth1 via fb00::21
+
+ip netns exec ${NS2} ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2
+ip netns exec ${NS2} ip -6 route add fd00::1 dev veth3 via fb00::43 scope link
+
+ip netns exec ${NS3} ip -6 route add fc42::1 dev veth5 via fb00::65
+ip netns exec ${NS3} ip -6 route add fd00::1 encap seg6local action End.BPF endpoint obj test_lwt_seg6local.o sec add_egr_x dev veth4
+
+ip netns exec ${NS4} ip -6 route add fd00::2 encap seg6local action End.BPF endpoint obj test_lwt_seg6local.o sec pop_egr dev veth6
+ip netns exec ${NS4} ip -6 addr add fc42::1 dev lo
+ip netns exec ${NS4} ip -6 route add fd00::3 dev veth7 via fb00::87
+
+ip netns exec ${NS5} ip -6 route add fd00::4 table 117 dev veth9 via fb00::109
+ip netns exec ${NS5} ip -6 route add fd00::3 encap seg6local action End.BPF endpoint obj test_lwt_seg6local.o sec inspect_t dev veth8
+
+ip netns exec ${NS6} ip -6 addr add fb00::6/16 dev lo
+ip netns exec ${NS6} ip -6 addr add fd00::4/16 dev lo
+
+ip netns exec ${NS1} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec ${NS2} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec ${NS3} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec ${NS4} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec ${NS5} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+
+ip netns exec ${NS6} sysctl net.ipv6.conf.all.seg6_enabled=1 > /dev/null
+ip netns exec ${NS6} sysctl net.ipv6.conf.lo.seg6_enabled=1 > /dev/null
+ip netns exec ${NS6} sysctl net.ipv6.conf.veth10.seg6_enabled=1 > /dev/null
+
+ip netns exec ${NS6} nc -l -6 -u -d 7330 > $TMP_FILE &
+ip netns exec ${NS1} bash -c "echo 'foobar' | nc -w0 -6 -u -p 2121 -s fb00::1 fb00::6 7330"
sleep 5 # wait enough time to ensure the UDP datagram arrived to the last segment
kill -TERM $!
--
2.31.1
next prev parent reply other threads:[~2022-01-25 9:07 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-25 8:17 [PATCH bpf 0/7] selftests/bpf: use temp netns for testing Hangbin Liu
2022-01-25 8:17 ` [PATCH bpf 1/7] selftests/bpf/test_xdp_redirect_multi: " Hangbin Liu
2022-01-27 5:24 ` William Tu
2022-01-27 5:34 ` John Fastabend
2022-01-27 6:40 ` Hangbin Liu
2022-01-28 2:53 ` John Fastabend
2022-01-25 8:17 ` [PATCH bpf 2/7] selftests/bpf/test_xdp_veth: " Hangbin Liu
2022-01-25 8:17 ` [PATCH bpf 3/7] selftests/bpf/test_xdp_vlan: " Hangbin Liu
2022-01-25 8:17 ` Hangbin Liu [this message]
2022-01-25 8:17 ` [PATCH bpf 5/7] selftests/bpf/test_tcp_check_syncookie: " Hangbin Liu
2022-01-26 9:32 ` Lorenz Bauer
2022-01-25 8:17 ` [PATCH bpf 6/7] selftests/bpf/test_xdp_meta: " Hangbin Liu
2022-01-25 8:17 ` [PATCH bpf 7/7] selftests/bpf/test_xdp_redirect: " Hangbin Liu
2022-01-27 5:26 ` William Tu
2022-01-28 2:54 ` [PATCH bpf 0/7] selftests/bpf: " John Fastabend
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220125081717.1260849-5-liuhangbin@gmail.com \
--to=liuhangbin@gmail.com \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=brouer@redhat.com \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=lmb@cloudflare.com \
--cc=m.xhonneux@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=toshiaki.makita1@gmail.com \
--cc=u9012063@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.