[PATCH v6 3/4] crypto: caam - add in-kernel interface for blob generator

From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: "Horia Geantă" <horia.geanta@nxp.com>,
	"Pankaj Gupta" <pankaj.gupta@nxp.com>,
	"Herbert Xu" <herbert@gondor.apana.org.au>,
	"David S. Miller" <davem@davemloft.net>
Cc: kernel@pengutronix.de, David Gstir <david@sigma-star.at>,
	Tim Harvey <tharvey@gateworks.com>,
	Matthias Schiffer <matthias.schiffer@ew.tq-group.com>,
	Ahmad Fatoum <a.fatoum@pengutronix.de>,
	James Bottomley <jejb@linux.ibm.com>,
	Jarkko Sakkinen <jarkko@kernel.org>,
	Mimi Zohar <zohar@linux.ibm.com>,
	David Howells <dhowells@redhat.com>,
	James Morris <jmorris@namei.org>,
	Eric Biggers <ebiggers@kernel.org>,
	"Serge E. Hallyn" <serge@hallyn.com>,
	Jan Luebbe <j.luebbe@pengutronix.de>,
	Richard Weinberger <richard@nod.at>,
	Franck LENORMAND <franck.lenormand@nxp.com>,
	Sumit Garg <sumit.garg@linaro.org>,
	linux-integrity@vger.kernel.org, keyrings@vger.kernel.org,
	linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-security-module@vger.kernel.org
Subject: [PATCH v6 3/4] crypto: caam - add in-kernel interface for blob generator
Date: Wed, 16 Mar 2022 17:43:34 +0100	[thread overview]
Message-ID: <20220316164335.1720255-4-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20220316164335.1720255-1-a.fatoum@pengutronix.de>

The NXP Cryptographic Acceleration and Assurance Module (CAAM)
can be used to protect user-defined data across system reboot:

  - When the system is fused and boots into secure state, the master
    key is a unique never-disclosed device-specific key
  - random key is encrypted by key derived from master key
  - data is encrypted using the random key
  - encrypted data and its encrypted random key are stored alongside
  - This blob can now be safely stored in non-volatile memory

On next power-on:
  - blob is loaded into CAAM
  - CAAM writes decrypted data either into memory or key register

Add functions to realize encrypting and decrypting into memory alongside
the CAAM driver.

They will be used in a later commit as a source for the trusted key
seal/unseal mechanism.

Reviewed-by: David Gstir <david@sigma-star.at>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Tested-By: Tim Harvey <tharvey@gateworks.com>
Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
v5 -> v6:
  - Dropped caam_blob_alloc_desc() in favor of kzalloc() with fixed size.
    This simplifies code and wastes at most 12 bytes which are freed
    at the end of the function anyway.
  - Factored out common code between caam_encap_blob and caam_decap_blob
    as both functions were largely identical
  - use append_seq_(in|out)_ptr_intlen for both encap/decap as a result
  - use reverse christmas tree order for caam_process_blob variable
    definitions.
v4 -> v5:
  - Collected Reviewed-by's and Tested-by's
  - Note in CAAM patch what CAAM is (Jarkko)
v3 -> v4:
  - Collected Acked-by's, Reviewed-by's and Tested-by
  - Fixed typo spotted by David
v2 -> v3:
 - No change
v1 -> v2:
 - Enforce maximum keymod size (Horia)
 - Use append_seq_(in|out)_ptr_intlen instead of append_seq_(in|out)_ptr
   (Horia)
 - Make blobifier handle private to CAAM glue code file (Horia)

To: "Horia Geantă" <horia.geanta@nxp.com>
To: Pankaj Gupta <pankaj.gupta@nxp.com>
To: Herbert Xu <herbert@gondor.apana.org.au>
To: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Jan Luebbe <j.luebbe@pengutronix.de>
Cc: David Gstir <david@sigma-star.at>
Cc: Richard Weinberger <richard@nod.at>
Cc: Franck LENORMAND <franck.lenormand@nxp.com>
Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: linux-integrity@vger.kernel.org
Cc: keyrings@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
---
 drivers/crypto/caam/Kconfig    |   3 +
 drivers/crypto/caam/Makefile   |   1 +
 drivers/crypto/caam/blob_gen.c | 160 +++++++++++++++++++++++++++++++++
 include/soc/fsl/caam-blob.h    |  79 ++++++++++++++++
 4 files changed, 243 insertions(+)
 create mode 100644 drivers/crypto/caam/blob_gen.c
 create mode 100644 include/soc/fsl/caam-blob.h

diff --git a/drivers/crypto/caam/Kconfig b/drivers/crypto/caam/Kconfig
index 84ea7cba5ee5..ea9f8b1ae981 100644
--- a/drivers/crypto/caam/Kconfig
+++ b/drivers/crypto/caam/Kconfig
@@ -151,6 +151,9 @@ config CRYPTO_DEV_FSL_CAAM_RNG_API
 	  Selecting this will register the SEC4 hardware rng to
 	  the hw_random API for supplying the kernel entropy pool.
 
+config CRYPTO_DEV_FSL_CAAM_BLOB_GEN
+	bool
+
 endif # CRYPTO_DEV_FSL_CAAM_JR
 
 endif # CRYPTO_DEV_FSL_CAAM
diff --git a/drivers/crypto/caam/Makefile b/drivers/crypto/caam/Makefile
index 3570286eb9ce..25f7ae5a4642 100644
--- a/drivers/crypto/caam/Makefile
+++ b/drivers/crypto/caam/Makefile
@@ -21,6 +21,7 @@ caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += caamalg_qi.o
 caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API) += caamhash.o
 caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API) += caamrng.o
 caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API) += caampkc.o pkc_desc.o
+caam_jr-$(CONFIG_CRYPTO_DEV_FSL_CAAM_BLOB_GEN) += blob_gen.o
 
 caam-$(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI) += qi.o
 ifneq ($(CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI),)
diff --git a/drivers/crypto/caam/blob_gen.c b/drivers/crypto/caam/blob_gen.c
new file mode 100644
index 000000000000..2564e63c8fe0
--- /dev/null
+++ b/drivers/crypto/caam/blob_gen.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Pengutronix, Steffen Trumtrar <kernel@pengutronix.de>
+ * Copyright (C) 2021 Pengutronix, Ahmad Fatoum <kernel@pengutronix.de>
+ */
+
+#include <linux/device.h>
+#include <soc/fsl/caam-blob.h>
+
+#include "compat.h"
+#include "desc_constr.h"
+#include "desc.h"
+#include "error.h"
+#include "intern.h"
+#include "jr.h"
+#include "regs.h"
+
+/* header + (key mod immediate) + 2x seq_intlen pointers + op */
+#define CAAM_BLOB_DESC_BYTES_MAX \
+	(CAAM_CMD_SZ + \
+	 CAAM_CMD_SZ + CAAM_BLOB_KEYMOD_LENGTH + \
+	 2 * (CAAM_CMD_SZ + CAAM_PTR_SZ_MAX) + \
+	 CAAM_CMD_SZ)
+
+struct caam_blob_priv {
+	struct device jrdev;
+};
+
+struct caam_blob_job_result {
+	int err;
+	struct completion completion;
+};
+
+static void caam_blob_job_done(struct device *dev, u32 *desc, u32 err, void *context)
+{
+	struct caam_blob_job_result *res = context;
+	int ecode = 0;
+
+	dev_dbg(dev, "%s %d: err 0x%x\n", __func__, __LINE__, err);
+
+	if (err)
+		ecode = caam_jr_strstatus(dev, err);
+
+	res->err = ecode;
+
+	/*
+	 * Upon completion, desc points to a buffer containing a CAAM job
+	 * descriptor which encapsulates data into an externally-storable
+	 * blob.
+	 */
+	complete(&res->completion);
+}
+
+int caam_process_blob(struct caam_blob_priv *priv, bool encap,
+		      const char *keymod, void *input, void *output,
+		      size_t length)
+{
+	size_t in_len = length, out_len = length;
+	struct caam_blob_job_result testres;
+	struct device *jrdev = &priv->jrdev;
+	dma_addr_t dma_in, dma_out;
+	int op = OP_PCLID_BLOB;
+	size_t keymod_len;
+	u32 *desc;
+	int ret;
+
+	keymod_len = strlen(keymod);
+
+	if (length <= CAAM_BLOB_OVERHEAD || keymod_len > CAAM_BLOB_KEYMOD_LENGTH)
+		return -EINVAL;
+
+	if (encap) {
+		op |= OP_TYPE_ENCAP_PROTOCOL;
+		in_len -= CAAM_BLOB_OVERHEAD;
+	} else {
+		op |= OP_TYPE_DECAP_PROTOCOL;
+		out_len -= CAAM_BLOB_OVERHEAD;
+	}
+
+	desc = kzalloc(CAAM_BLOB_DESC_BYTES_MAX, GFP_KERNEL | GFP_DMA);
+	if (!desc) {
+		dev_err(jrdev, "unable to allocate desc\n");
+		return -ENOMEM;
+	}
+
+	dma_in = dma_map_single(jrdev, input, in_len, DMA_TO_DEVICE);
+	if (dma_mapping_error(jrdev, dma_in)) {
+		dev_err(jrdev, "unable to map input DMA buffer\n");
+		ret = -ENOMEM;
+		goto out_free;
+	}
+
+	dma_out = dma_map_single(jrdev, output, out_len, DMA_FROM_DEVICE);
+	if (dma_mapping_error(jrdev, dma_out)) {
+		dev_err(jrdev, "unable to map output DMA buffer\n");
+		ret = -ENOMEM;
+		goto out_unmap_in;
+	}
+
+	/*
+	 * A data blob is encrypted using a blob key (BK); a random number.
+	 * The BK is used as an AES-CCM key. The initial block (B0) and the
+	 * initial counter (Ctr0) are generated automatically and stored in
+	 * Class 1 Context DWords 0+1+2+3. The random BK is stored in the
+	 * Class 1 Key Register. Operation Mode is set to AES-CCM.
+	 */
+
+	init_job_desc(desc, 0);
+	append_key_as_imm(desc, keymod, keymod_len, keymod_len,
+			  CLASS_2 | KEY_DEST_CLASS_REG);
+	append_seq_in_ptr_intlen(desc, dma_in, in_len, 0);
+	append_seq_out_ptr_intlen(desc, dma_out, out_len, 0);
+	append_operation(desc, op);
+
+	print_hex_dump_debug("data@"__stringify(__LINE__)": ",
+			     DUMP_PREFIX_ADDRESS, 16, 1, input,
+			     in_len, false);
+	print_hex_dump_debug("jobdesc@"__stringify(__LINE__)": ",
+			     DUMP_PREFIX_ADDRESS, 16, 1, desc,
+			     desc_bytes(desc), false);
+
+	testres.err = 0;
+	init_completion(&testres.completion);
+
+	ret = caam_jr_enqueue(jrdev, desc, caam_blob_job_done, &testres);
+	if (ret == -EINPROGRESS) {
+		wait_for_completion(&testres.completion);
+		ret = testres.err;
+		print_hex_dump_debug("output@"__stringify(__LINE__)": ",
+				     DUMP_PREFIX_ADDRESS, 16, 1, output,
+				     out_len, false);
+	}
+
+	dma_unmap_single(jrdev, dma_out, out_len, DMA_FROM_DEVICE);
+out_unmap_in:
+	dma_unmap_single(jrdev, dma_in, in_len, DMA_TO_DEVICE);
+out_free:
+	kfree(desc);
+
+	return ret;
+}
+EXPORT_SYMBOL(caam_process_blob);
+
+struct caam_blob_priv *caam_blob_gen_init(void)
+{
+	struct device *jrdev;
+
+	jrdev = caam_jr_alloc();
+	if (IS_ERR(jrdev))
+		return ERR_CAST(jrdev);
+
+	return container_of(jrdev, struct caam_blob_priv, jrdev);
+}
+EXPORT_SYMBOL(caam_blob_gen_init);
+
+void caam_blob_gen_exit(struct caam_blob_priv *priv)
+{
+	caam_jr_free(&priv->jrdev);
+}
+EXPORT_SYMBOL(caam_blob_gen_exit);
diff --git a/include/soc/fsl/caam-blob.h b/include/soc/fsl/caam-blob.h
new file mode 100644
index 000000000000..2c4a05dc59cd
--- /dev/null
+++ b/include/soc/fsl/caam-blob.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Pengutronix, Ahmad Fatoum <kernel@pengutronix.de>
+ */
+
+#ifndef __CAAM_BLOB_GEN
+#define __CAAM_BLOB_GEN
+
+#include <linux/types.h>
+
+#define CAAM_BLOB_KEYMOD_LENGTH		16
+#define CAAM_BLOB_OVERHEAD		(32 + 16)
+#define CAAM_BLOB_MAX_LEN		4096
+
+struct caam_blob_priv;
+
+/** caam_blob_gen_init - initialize blob generation
+ *
+ * returns either pointer to new caam_blob_priv instance
+ * or error pointer
+ */
+struct caam_blob_priv *caam_blob_gen_init(void);
+
+/** caam_blob_gen_exit - free blob generation resources
+ *
+ * @priv: instance returned by caam_blob_gen_init
+ */
+void caam_blob_gen_exit(struct caam_blob_priv *priv);
+
+/** caam_process_blob - encapsulate or decapsulate blob
+ *
+ * @priv:   instance returned by caam_blob_gen_init
+ * @encap:  true for encapsulation, false for decapsulation
+ * @keymod: string to use as key modifier for blob capsulation
+ *	    can't be longer than CAAM_BLOB_KEYMOD_LENGTH
+ * @input:  buffer which CAAM will DMA from
+ * @output: buffer which CAAM will DMA to
+ * @length: buffer length including blob overhead
+ *          CAAM_BLOB_OVERHEAD < length <= CAAM_BLOB_MAX_LEN
+ */
+int caam_process_blob(struct caam_blob_priv *priv, bool encap,
+		      const char *keymod, void *input, void *output,
+		      size_t length);
+
+/** caam_encap_blob - encapsulate blob
+ *
+ * @priv:   instance returned by caam_blob_gen_init
+ * @keymod: string to use as key modifier for blob encapsulation
+ *	    can't be longer than CAAM_BLOB_KEYMOD_LENGTH
+ * @input:  buffer which CAAM will DMA from
+ * @output: buffer which CAAM will DMA to
+ * @length: buffer length including blob overhead
+ *          CAAM_BLOB_OVERHEAD < length <= CAAM_BLOB_MAX_LEN
+ */
+static inline int caam_encap_blob(struct caam_blob_priv *priv,
+				  const char *keymod,
+				  void *input, void *output, size_t length)
+{
+	return caam_process_blob(priv, true, keymod, input, output, length);
+}
+
+/** caam_decap_blob - decapsulate blob
+ *
+ * @priv:   instance returned by caam_blob_gen_init
+ * @keymod: string to use as key modifier for blob decapsulation
+ *	    can't be longer than CAAM_BLOB_KEYMOD_LENGTH
+ * @input:  buffer which CAAM will DMA from
+ * @output: buffer which CAAM will DMA to
+ * @length: buffer length including blob overhead
+ *          CAAM_BLOB_OVERHEAD < length <= CAAM_BLOB_MAX_LEN
+ */
+static inline int caam_decap_blob(struct caam_blob_priv *priv,
+				  const char *keymod,
+				  void *input, void *output, size_t length)
+{
+	return caam_process_blob(priv, false, keymod, input, output, length);
+}
+
+#endif
-- 
2.30.2

