From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] arm64: dts: qcom: sm8350: Add GENI I2C/SPI DMA channels
Date: Tue, 12 Apr 2022 14:51:36 -0700 [thread overview]
Message-ID: <20220412215137.2385831-2-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20220412215137.2385831-1-bjorn.andersson@linaro.org>
The GENI I2C and SPI controllers may use the GPI DMA engine, define the
rx and tx channels for these controllers to enable this.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 108 +++++++++++++++++++++++++++
1 file changed, 108 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 7e585d9e4c68..8547c0b2f060 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -721,6 +721,9 @@ i2c14: i2c@880000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c14_default>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -734,6 +737,9 @@ spi14: spi@880000 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_120mhz>;
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -747,6 +753,9 @@ i2c15: i2c@884000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c15_default>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -760,6 +769,9 @@ spi15: spi@884000 {
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_120mhz>;
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -773,6 +785,9 @@ i2c16: i2c@888000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c16_default>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -786,6 +801,9 @@ spi16: spi@888000 {
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -799,6 +817,9 @@ i2c17: i2c@88c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c17_default>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -812,6 +833,9 @@ spi17: spi@88c000 {
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -827,6 +851,9 @@ spi18: spi@890000 {
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -853,6 +880,9 @@ i2c19: i2c@894000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c19_default>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -917,6 +947,9 @@ i2c0: i2c@980000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -930,6 +963,9 @@ spi0: spi@980000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -943,6 +979,9 @@ i2c1: i2c@984000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -956,6 +995,9 @@ spi1: spi@984000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -969,6 +1011,9 @@ i2c2: i2c@988000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -982,6 +1027,9 @@ spi2: spi@988000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1012,6 +1060,9 @@ spi3: spi@98c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1025,6 +1076,9 @@ i2c4: i2c@990000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1038,6 +1092,9 @@ spi4: spi@990000 {
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1051,6 +1108,9 @@ i2c5: i2c@994000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1064,6 +1124,9 @@ spi5: spi@994000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1077,6 +1140,9 @@ i2c6: i2c@998000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1090,6 +1156,9 @@ spi6: spi@998000 {
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1116,6 +1185,9 @@ i2c7: i2c@99c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c7_default>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1180,6 +1252,9 @@ i2c8: i2c@a80000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1193,6 +1268,9 @@ spi8: spi@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_120mhz>;
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1206,6 +1284,9 @@ i2c9: i2c@a84000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1219,6 +1300,9 @@ spi9: spi@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1232,6 +1316,9 @@ i2c10: i2c@a88000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1245,6 +1332,9 @@ spi10: spi@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1258,6 +1348,9 @@ i2c11: i2c@a8c000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1271,6 +1364,9 @@ spi11: spi@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1284,6 +1380,9 @@ i2c12: i2c@a90000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1297,6 +1396,9 @@ spi12: spi@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1310,6 +1412,9 @@ i2c13: i2c@a94000 {
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c13_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1323,6 +1428,9 @@ spi13: spi@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
--
2.35.1
next prev parent reply other threads:[~2022-04-12 23:33 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-12 21:51 [PATCH 1/3] arm64: dts: qcom: sm8350: Define GPI DMA engines Bjorn Andersson
2022-04-12 21:51 ` Bjorn Andersson [this message]
2022-04-13 3:14 ` [PATCH 2/3] arm64: dts: qcom: sm8350: Add GENI I2C/SPI DMA channels Vinod Koul
2022-04-13 3:57 ` Bjorn Andersson
2022-04-18 7:19 ` Vinod Koul
2022-04-18 8:01 ` Vinod Koul
2022-04-12 21:51 ` [PATCH 3/3] arm64: dts: qcom: sm8350-hdk: Enable &gpi_dma1 Bjorn Andersson
2022-04-18 8:02 ` Vinod Koul
2022-04-18 7:18 ` [PATCH 1/3] arm64: dts: qcom: sm8350: Define GPI DMA engines Vinod Koul
2022-04-21 14:26 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220412215137.2385831-2-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.