From: "José Expósito" <jose.exposito89@gmail.com>
To: jikos@kernel.org
Cc: benjamin.tissoires@redhat.com, spbnick@gmail.com,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
"José Expósito" <jose.exposito89@gmail.com>
Subject: [PATCH for-5.19/uclogic 3/4] HID: uclogic: Add support for bitmap dials
Date: Thu, 14 Apr 2022 13:09:35 +0200 [thread overview]
Message-ID: <20220414110936.146378-4-jose.exposito89@gmail.com> (raw)
In-Reply-To: <20220414110936.146378-1-jose.exposito89@gmail.com>
From: Nikolai Kondrashov <spbnick@gmail.com>
A bitmap dial sends reports with a dedicated bit per direction: 1 means
clockwise rotation, 2 means counterclockwise, as opposed to the normal
1 and -1 values.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
---
drivers/hid/hid-uclogic-core.c | 6 ++++++
drivers/hid/hid-uclogic-params.h | 15 ++++++++++++++-
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
index 96f3fb8c492c..627f1d0c52f2 100644
--- a/drivers/hid/hid-uclogic-core.c
+++ b/drivers/hid/hid-uclogic-core.c
@@ -382,6 +382,12 @@ static int uclogic_raw_event_frame(
}
}
+ /* If need to, and can, transform the bitmap dial reports */
+ if (frame->bitmap_dial_byte > 0 && frame->bitmap_dial_byte < size) {
+ if (data[frame->bitmap_dial_byte] == 2)
+ data[frame->bitmap_dial_byte] = -1;
+ }
+
return 0;
}
diff --git a/drivers/hid/hid-uclogic-params.h b/drivers/hid/hid-uclogic-params.h
index 78965e683d20..e5ccc558abc3 100644
--- a/drivers/hid/hid-uclogic-params.h
+++ b/drivers/hid/hid-uclogic-params.h
@@ -153,6 +153,13 @@ struct uclogic_params_frame {
* Zero if no reversal should be done.
*/
__s8 touch_ring_flip_at;
+ /*
+ * Offset of the bitmap dial byte, in the report. Zero if not present.
+ * Only valid if "id" is not zero. A bitmap dial sends reports with a
+ * dedicated bit per direction: 1 means clockwise rotation, 2 means
+ * counterclockwise, as opposed to the normal 1 and -1.
+ */
+ unsigned int bitmap_dial_byte;
};
/*
@@ -230,6 +237,7 @@ extern int uclogic_params_init(struct uclogic_params *params,
"\t\t.touch_ring_byte = %u\n" \
"\t\t.touch_ring_max = %hhd\n" \
"\t\t.touch_ring_flip_at = %hhd\n" \
+ "\t\t.bitmap_dial_byte = %u\n" \
"\t},\n" \
"\t{\n" \
"\t\t.desc_ptr = %p\n" \
@@ -241,6 +249,7 @@ extern int uclogic_params_init(struct uclogic_params *params,
"\t\t.touch_ring_byte = %u\n" \
"\t\t.touch_ring_max = %hhd\n" \
"\t\t.touch_ring_flip_at = %hhd\n" \
+ "\t\t.bitmap_dial_byte = %u\n" \
"\t},\n" \
"\t{\n" \
"\t\t.desc_ptr = %p\n" \
@@ -252,6 +261,7 @@ extern int uclogic_params_init(struct uclogic_params *params,
"\t\t.touch_ring_byte = %u\n" \
"\t\t.touch_ring_max = %hhd\n" \
"\t\t.touch_ring_flip_at = %hhd\n" \
+ "\t\t.bitmap_dial_byte = %u\n" \
"\t},\n" \
"}\n"
@@ -281,6 +291,7 @@ extern int uclogic_params_init(struct uclogic_params *params,
(_params)->frame_list[0].touch_ring_byte, \
(_params)->frame_list[0].touch_ring_max, \
(_params)->frame_list[0].touch_ring_flip_at, \
+ (_params)->frame_list[0].bitmap_dial_byte, \
(_params)->frame_list[1].desc_ptr, \
(_params)->frame_list[1].desc_size, \
(_params)->frame_list[1].id, \
@@ -290,6 +301,7 @@ extern int uclogic_params_init(struct uclogic_params *params,
(_params)->frame_list[1].touch_ring_byte, \
(_params)->frame_list[1].touch_ring_max, \
(_params)->frame_list[1].touch_ring_flip_at, \
+ (_params)->frame_list[1].bitmap_dial_byte, \
(_params)->frame_list[2].desc_ptr, \
(_params)->frame_list[2].desc_size, \
(_params)->frame_list[2].id, \
@@ -298,7 +310,8 @@ extern int uclogic_params_init(struct uclogic_params *params,
(_params)->frame_list[2].dev_id_byte, \
(_params)->frame_list[2].touch_ring_byte, \
(_params)->frame_list[2].touch_ring_max, \
- (_params)->frame_list[2].touch_ring_flip_at
+ (_params)->frame_list[2].touch_ring_flip_at, \
+ (_params)->frame_list[2].bitmap_dial_byte
/* Get a replacement report descriptor for a tablet's interface. */
extern int uclogic_params_get_desc(const struct uclogic_params *params,
--
2.25.1
next prev parent reply other threads:[~2022-04-14 11:10 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-14 11:09 [PATCH for-5.19/uclogic 0/4] DIGImend patches, part IV José Expósito
2022-04-14 11:09 ` [PATCH for-5.19/uclogic 1/4] HID: uclogic: Compress params format string José Expósito
2022-04-14 11:09 ` [PATCH for-5.19/uclogic 2/4] HID: uclogic: Reduce indent for params format str/args José Expósito
2022-04-14 11:09 ` José Expósito [this message]
2022-04-14 11:09 ` [PATCH for-5.19/uclogic 4/4] HID: uclogic: Add support for Huion Q620M José Expósito
2022-04-21 8:09 ` [PATCH for-5.19/uclogic 0/4] DIGImend patches, part IV Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220414110936.146378-4-jose.exposito89@gmail.com \
--to=jose.exposito89@gmail.com \
--cc=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=spbnick@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.