[PATCH v5 09/10] serial: 8250_lpss: Use 32-bit reads

From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-serial@vger.kernel.org, Greg KH <gregkh@linuxfoundation.org>
Cc: "Jiri Slaby" <jirislaby@kernel.org>,
	"Lukas Wunner" <lukas@wunner.de>,
	"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Vicente Bergas" <vicencb@gmail.com>,
	"Johan Hovold" <johan@kernel.org>,
	heiko@sntech.de, giulio.benetti@micronovasrl.com,
	"Heikki Krogerus" <heikki.krogerus@linux.intel.com>,
	"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v5 09/10] serial: 8250_lpss: Use 32-bit reads
Date: Tue, 26 Apr 2022 15:24:47 +0300	[thread overview]
Message-ID: <20220426122448.38997-10-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20220426122448.38997-1-ilpo.jarvinen@linux.intel.com>

Use 32-bit reads in order to not lose higher bits of DW UART regs. This
change does not fix any known issue as the high bits are not used for
anything related to 8250 driver (dw8250_readl_ext and dw8250_writel_ext
used within the dwlib are already doing
readl/writel/ioread32be/iowrite32be anyway).

This change is necessary for the next patch that enables 9th bit
address mode. DW UART reports address frames with BIT(8) of LSR.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/8250/8250_lpss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 0f5af061e0b4..4ba43bef9933 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -330,7 +330,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	uart.port.irq = pci_irq_vector(pdev, 0);
 	uart.port.private_data = &lpss->data;
 	uart.port.type = PORT_16550A;
-	uart.port.iotype = UPIO_MEM;
+	uart.port.iotype = UPIO_MEM32;
 	uart.port.regshift = 2;
 	uart.port.uartclk = lpss->board->base_baud * 16;
 	uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
-- 
2.30.2

