From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>,
Johannes Thumshirn <johannes.thumshirn@wdc.com>
Subject: [PATCH 14/20] aic7xxx: do not reference scsi command when resetting device
Date: Thu, 12 May 2022 13:12:30 +0200 [thread overview]
Message-ID: <20220512111236.109851-15-hare@suse.de> (raw)
In-Reply-To: <20220512111236.109851-1-hare@suse.de>
When sending a device reset we should not take a reference to the
scsi command.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
---
drivers/scsi/aic7xxx/aic7xxx_osm.c | 108 +++++++++++++++--------------
1 file changed, 57 insertions(+), 51 deletions(-)
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 15e53b33b955..4ae0a1c4d374 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -366,7 +366,8 @@ static void ahc_linux_queue_cmd_complete(struct ahc_softc *ahc,
struct scsi_cmnd *cmd);
static void ahc_linux_freeze_simq(struct ahc_softc *ahc);
static void ahc_linux_release_simq(struct ahc_softc *ahc);
-static int ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag);
+static int ahc_linux_queue_recovery_cmd(struct scsi_device *sdev,
+ struct scsi_cmnd *cmd);
static void ahc_linux_initialize_scsi_bus(struct ahc_softc *ahc);
static u_int ahc_linux_user_tagdepth(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo);
@@ -728,7 +729,7 @@ ahc_linux_abort(struct scsi_cmnd *cmd)
{
int error;
- error = ahc_linux_queue_recovery_cmd(cmd, SCB_ABORT);
+ error = ahc_linux_queue_recovery_cmd(cmd->device, cmd);
if (error != SUCCESS)
printk("aic7xxx_abort returns 0x%x\n", error);
return (error);
@@ -742,7 +743,7 @@ ahc_linux_dev_reset(struct scsi_cmnd *cmd)
{
int error;
- error = ahc_linux_queue_recovery_cmd(cmd, SCB_DEVICE_RESET);
+ error = ahc_linux_queue_recovery_cmd(cmd->device, NULL);
if (error != SUCCESS)
printk("aic7xxx_dev_reset returns 0x%x\n", error);
return (error);
@@ -2036,11 +2037,12 @@ ahc_linux_release_simq(struct ahc_softc *ahc)
}
static int
-ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
+ahc_linux_queue_recovery_cmd(struct scsi_device *sdev,
+ struct scsi_cmnd *cmd)
{
struct ahc_softc *ahc;
struct ahc_linux_device *dev;
- struct scb *pending_scb;
+ struct scb *pending_scb = NULL, *scb;
u_int saved_scbptr;
u_int active_scb_index;
u_int last_phase;
@@ -2053,18 +2055,19 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
int disconnected;
unsigned long flags;
- pending_scb = NULL;
paused = FALSE;
wait = FALSE;
- ahc = *(struct ahc_softc **)cmd->device->host->hostdata;
+ ahc = *(struct ahc_softc **)sdev->host->hostdata;
- scmd_printk(KERN_INFO, cmd, "Attempting to queue a%s message\n",
- flag == SCB_ABORT ? "n ABORT" : " TARGET RESET");
+ sdev_printk(KERN_INFO, sdev, "Attempting to queue a%s message\n",
+ cmd ? "n ABORT" : " TARGET RESET");
- printk("CDB:");
- for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
- printk(" 0x%x", cmd->cmnd[cdb_byte]);
- printk("\n");
+ if (cmd) {
+ printk("CDB:");
+ for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
+ printk(" 0x%x", cmd->cmnd[cdb_byte]);
+ printk("\n");
+ }
ahc_lock(ahc, &flags);
@@ -2075,7 +2078,7 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
* at all, and the system wanted us to just abort the
* command, return success.
*/
- dev = scsi_transport_device_data(cmd->device);
+ dev = scsi_transport_device_data(sdev);
if (dev == NULL) {
/*
@@ -2083,13 +2086,12 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
* so we must not still own the command.
*/
printk("%s:%d:%d:%d: Is not an active device\n",
- ahc_name(ahc), cmd->device->channel, cmd->device->id,
- (u8)cmd->device->lun);
+ ahc_name(ahc), sdev->channel, sdev->id, (u8)sdev->lun);
retval = SUCCESS;
goto no_cmd;
}
- if ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED)) == 0
+ if (cmd && (dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED)) == 0
&& ahc_search_untagged_queues(ahc, cmd, cmd->device->id,
cmd->device->channel + 'A',
(u8)cmd->device->lun,
@@ -2104,25 +2106,28 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
/*
* See if we can find a matching cmd in the pending list.
*/
- LIST_FOREACH(pending_scb, &ahc->pending_scbs, pending_links) {
- if (pending_scb->io_ctx == cmd)
- break;
- }
-
- if (pending_scb == NULL && flag == SCB_DEVICE_RESET) {
-
+ if (cmd) {
+ LIST_FOREACH(scb, &ahc->pending_scbs, pending_links) {
+ if (scb->io_ctx == cmd) {
+ pending_scb = scb;
+ break;
+ }
+ }
+ } else {
/* Any SCB for this device will do for a target reset */
- LIST_FOREACH(pending_scb, &ahc->pending_scbs, pending_links) {
- if (ahc_match_scb(ahc, pending_scb, scmd_id(cmd),
- scmd_channel(cmd) + 'A',
+ LIST_FOREACH(scb, &ahc->pending_scbs, pending_links) {
+ if (ahc_match_scb(ahc, scb, sdev->id,
+ sdev->channel + 'A',
CAM_LUN_WILDCARD,
- SCB_LIST_NULL, ROLE_INITIATOR))
+ SCB_LIST_NULL, ROLE_INITIATOR)) {
+ pending_scb = scb;
break;
+ }
}
}
if (pending_scb == NULL) {
- scmd_printk(KERN_INFO, cmd, "Command not found\n");
+ sdev_printk(KERN_INFO, sdev, "Command not found\n");
goto no_cmd;
}
@@ -2153,22 +2158,22 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
ahc_dump_card_state(ahc);
disconnected = TRUE;
- if (flag == SCB_ABORT) {
- if (ahc_search_qinfifo(ahc, cmd->device->id,
- cmd->device->channel + 'A',
- cmd->device->lun,
+ if (cmd) {
+ if (ahc_search_qinfifo(ahc, sdev->id,
+ sdev->channel + 'A',
+ sdev->lun,
pending_scb->hscb->tag,
ROLE_INITIATOR, CAM_REQ_ABORTED,
SEARCH_COMPLETE) > 0) {
printk("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
- ahc_name(ahc), cmd->device->channel,
- cmd->device->id, (u8)cmd->device->lun);
+ ahc_name(ahc), sdev->channel,
+ sdev->id, (u8)sdev->lun);
retval = SUCCESS;
goto done;
}
- } else if (ahc_search_qinfifo(ahc, cmd->device->id,
- cmd->device->channel + 'A',
- cmd->device->lun,
+ } else if (ahc_search_qinfifo(ahc, sdev->id,
+ sdev->channel + 'A',
+ sdev->lun,
pending_scb->hscb->tag,
ROLE_INITIATOR, /*status*/0,
SEARCH_COUNT) > 0) {
@@ -2181,7 +2186,7 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
bus_scb = ahc_lookup_scb(ahc, ahc_inb(ahc, SCB_TAG));
if (bus_scb == pending_scb)
disconnected = FALSE;
- else if (flag != SCB_ABORT
+ else if (!cmd
&& ahc_inb(ahc, SAVED_SCSIID) == pending_scb->hscb->scsiid
&& ahc_inb(ahc, SAVED_LUN) == SCB_GET_LUN(pending_scb))
disconnected = FALSE;
@@ -2201,18 +2206,18 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
saved_scsiid = ahc_inb(ahc, SAVED_SCSIID);
if (last_phase != P_BUSFREE
&& (pending_scb->hscb->tag == active_scb_index
- || (flag == SCB_DEVICE_RESET
- && SCSIID_TARGET(ahc, saved_scsiid) == scmd_id(cmd)))) {
+ || (!cmd && SCSIID_TARGET(ahc, saved_scsiid) == sdev->id))) {
/*
* We're active on the bus, so assert ATN
* and hope that the target responds.
*/
pending_scb = ahc_lookup_scb(ahc, active_scb_index);
- pending_scb->flags |= SCB_RECOVERY_SCB|flag;
+ pending_scb->flags |= SCB_RECOVERY_SCB;
+ pending_scb->flags |= cmd ? SCB_ABORT : SCB_DEVICE_RESET;
ahc_outb(ahc, MSG_OUT, HOST_MSG);
ahc_outb(ahc, SCSISIGO, last_phase|ATNO);
- scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n");
+ sdev_printk(KERN_INFO, sdev, "Device is active, asserting ATN\n");
wait = TRUE;
} else if (disconnected) {
@@ -2233,7 +2238,8 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
* an unsolicited reselection occurred.
*/
pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED;
- pending_scb->flags |= SCB_RECOVERY_SCB|flag;
+ pending_scb->flags |= SCB_RECOVERY_SCB;
+ pending_scb->flags |= cmd ? SCB_ABORT : SCB_DEVICE_RESET;
/*
* Remove any cached copy of this SCB in the
@@ -2242,9 +2248,9 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
* same element in the SCB, SCB_NEXT, for
* both the qinfifo and the disconnected list.
*/
- ahc_search_disc_list(ahc, cmd->device->id,
- cmd->device->channel + 'A',
- cmd->device->lun, pending_scb->hscb->tag,
+ ahc_search_disc_list(ahc, sdev->id,
+ sdev->channel + 'A',
+ sdev->lun, pending_scb->hscb->tag,
/*stop_on_first*/TRUE,
/*remove*/TRUE,
/*save_state*/FALSE);
@@ -2267,9 +2273,9 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
* so we are the next SCB for this target
* to run.
*/
- ahc_search_qinfifo(ahc, cmd->device->id,
- cmd->device->channel + 'A',
- cmd->device->lun, SCB_LIST_NULL,
+ ahc_search_qinfifo(ahc, sdev->id,
+ sdev->channel + 'A',
+ (u8)sdev->lun, SCB_LIST_NULL,
ROLE_INITIATOR, CAM_REQUEUE_REQ,
SEARCH_COMPLETE);
ahc_qinfifo_requeue_tail(ahc, pending_scb);
@@ -2278,7 +2284,7 @@ ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
printk("Device is disconnected, re-queuing SCB\n");
wait = TRUE;
} else {
- scmd_printk(KERN_INFO, cmd, "Unable to deliver message\n");
+ sdev_printk(KERN_INFO, sdev, "Unable to deliver message\n");
retval = FAILED;
goto done;
}
--
2.29.2
next prev parent reply other threads:[~2022-05-12 11:13 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-12 11:12 [PATCHv3 00/20] scsi: EH rework prep patches, part 1 Hannes Reinecke
2022-05-12 11:12 ` [PATCH 01/20] csiostor: use fc_block_rport() Hannes Reinecke
2022-05-12 11:12 ` [PATCH 02/20] fc_fcp: " Hannes Reinecke
2022-05-12 11:12 ` [PATCH 03/20] mptfc: simplify mpt_fc_block_error_handler() Hannes Reinecke
2022-05-12 11:12 ` [PATCH 04/20] mptfusion: correct definitions for mptscsih_dev_reset() Hannes Reinecke
2022-05-19 17:27 ` Ewan Milne
2022-05-23 12:25 ` Hannes Reinecke
2022-05-12 11:12 ` [PATCH 05/20] mptfc: open-code mptfc_block_error_handler() for bus reset Hannes Reinecke
2022-05-19 17:05 ` Ewan Milne
2022-05-20 6:42 ` Hannes Reinecke
2022-05-12 11:12 ` [PATCH 06/20] qedf: use fc rport as argument for qedf_initiate_tmf() Hannes Reinecke
2022-05-19 18:22 ` Ewan Milne
2022-05-20 6:49 ` Hannes Reinecke
2022-05-25 19:06 ` Ewan Milne
2022-05-27 5:39 ` Hannes Reinecke
2022-05-12 11:12 ` [PATCH 07/20] bnx2fc: Do not rely on a scsi command for lun or target reset Hannes Reinecke
2022-05-12 11:12 ` [PATCH 08/20] ibmvfc: open-code reset loop for " Hannes Reinecke
2022-05-19 20:05 ` Ewan Milne
2022-05-20 5:52 ` Hannes Reinecke
2022-05-12 11:12 ` [PATCH 09/20] ibmvfc: use fc_block_rport() Hannes Reinecke
2022-05-12 11:12 ` [PATCH 10/20] fnic: use dedicated device reset command Hannes Reinecke
2022-05-12 11:12 ` [PATCH 11/20] fnic: use fc_block_rport() correctly Hannes Reinecke
2022-05-12 11:12 ` [PATCH 12/20] aic7xxx: make BUILD_SCSIID() a function Hannes Reinecke
2022-05-16 5:49 ` Christoph Hellwig
2022-05-12 11:12 ` [PATCH 13/20] aic79xx: " Hannes Reinecke
2022-05-16 5:49 ` Christoph Hellwig
2022-05-12 11:12 ` Hannes Reinecke [this message]
2022-05-12 11:12 ` [PATCH 15/20] aic79xx: do not reference scsi command when resetting device Hannes Reinecke
2022-05-12 11:12 ` [PATCH 16/20] snic: reserve tag for TMF Hannes Reinecke
2022-05-13 8:03 ` John Garry
2022-05-12 11:12 ` [PATCH 17/20] snic: use dedicated device reset command Hannes Reinecke
2022-05-12 11:12 ` [PATCH 18/20] snic: Use scsi_host_busy_iter() to traverse commands Hannes Reinecke
2022-05-12 11:12 ` [PATCH 19/20] ips: Do not try to abort command from host reset Hannes Reinecke
2022-05-12 11:12 ` [PATCH 20/20] megaraid: pass in NULL scb for " Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220512111236.109851-15-hare@suse.de \
--to=hare@suse.de \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=johannes.thumshirn@wdc.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.