All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: linux-clk@vger.kernel.org,
	Mike Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: Yassine Oudjana <y.oudjana@protonmail.com>,
	Naresh Kamboju <naresh.kamboju@linaro.org>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	Tony Lindgren <tony@atomide.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Alexander Stein <alexander.stein@ew.tq-group.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v5 10/28] clk: tests: Add tests for single parent mux
Date: Mon, 16 May 2022 15:25:09 +0200	[thread overview]
Message-ID: <20220516132527.328190-11-maxime@cerno.tech> (raw)
In-Reply-To: <20220516132527.328190-1-maxime@cerno.tech>

We have a few tests for a mux with a single parent, testing the case
where it used to be orphan.

Let's leverage most of the code but register the clock properly to test
a few trivial things.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk_test.c | 186 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 177 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index 429e96796c66..87f581c2e1e1 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -352,6 +352,181 @@ struct clk_single_parent_ctx {
 	struct clk_hw hw;
 };
 
+static int clk_single_parent_mux_test_init(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx;
+	int ret;
+
+	ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	test->priv = ctx;
+
+	ctx->parent_ctx.rate = DUMMY_CLOCK_INIT_RATE;
+	ctx->parent_ctx.hw.init =
+		CLK_HW_INIT_NO_PARENT("parent-clk",
+				      &clk_dummy_rate_ops,
+				      0);
+
+	ret = clk_hw_register(NULL, &ctx->parent_ctx.hw);
+	if (ret)
+		return ret;
+
+	ctx->hw.init = CLK_HW_INIT("test-clk", "parent-clk",
+				   &clk_dummy_single_parent_ops,
+				   CLK_SET_RATE_PARENT);
+
+	ret = clk_hw_register(NULL, &ctx->hw);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void
+clk_single_parent_mux_test_exit(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+
+	clk_hw_unregister(&ctx->hw);
+	clk_hw_unregister(&ctx->parent_ctx.hw);
+}
+
+/*
+ * Test that for a clock with a single parent, clk_get_parent() actually
+ * returns the parent.
+ */
+static void
+clk_test_single_parent_mux_get_parent(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+
+	parent = clk_get_parent(clk);
+	KUNIT_EXPECT_TRUE(test, clk_is_match(parent, ctx->parent_ctx.hw.clk));
+}
+
+/*
+ * Test that for a clock that can't modify its rate and with a single
+ * parent, if we set disjoints range on the parent and then the child,
+ * the second will return an error.
+ *
+ * FIXME: clk_set_rate_range() only considers the current clock when
+ * evaluating whether ranges are disjoints and not the upstream clocks
+ * ranges.
+ */
+static void
+clk_test_single_parent_mux_set_range_disjoint_child_last(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+	int ret;
+
+	kunit_skip(test, "This needs to be fixed in the core.");
+
+	parent = clk_get_parent(clk);
+	KUNIT_ASSERT_PTR_NE(test, parent, NULL);
+
+	ret = clk_set_rate_range(parent, 1000, 2000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate_range(clk, 3000, 4000);
+	KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that for a clock that can't modify its rate and with a single
+ * parent, if we set disjoints range on the child and then the parent,
+ * the second will return an error.
+ *
+ * FIXME: clk_set_rate_range() only considers the current clock when
+ * evaluating whether ranges are disjoints and not the downstream clocks
+ * ranges.
+ */
+static void
+clk_test_single_parent_mux_set_range_disjoint_parent_last(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+	int ret;
+
+	kunit_skip(test, "This needs to be fixed in the core.");
+
+	parent = clk_get_parent(clk);
+	KUNIT_ASSERT_PTR_NE(test, parent, NULL);
+
+	ret = clk_set_rate_range(clk, 1000, 2000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate_range(parent, 3000, 4000);
+	KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that for a clock that can't modify its rate and with a single
+ * parent, if we set a range on the parent and a more restrictive one on
+ * the child, and then call clk_round_rate(), the boundaries of the
+ * two clocks are taken into account.
+ */
+static void
+clk_test_single_parent_mux_set_range_round_rate_child_smaller(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+	unsigned long rate;
+	int ret;
+
+	parent = clk_get_parent(clk);
+	KUNIT_ASSERT_PTR_NE(test, parent, NULL);
+
+	ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1 + 1000, DUMMY_CLOCK_RATE_2 - 1000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
+	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
+
+	rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
+	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
+}
+
+static struct kunit_case clk_single_parent_mux_test_cases[] = {
+	KUNIT_CASE(clk_test_single_parent_mux_get_parent),
+	KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_child_last),
+	KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_parent_last),
+	KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_child_smaller),
+	{}
+};
+
+/*
+ * Test suite for a basic mux clock with one parent, with
+ * CLK_SET_RATE_PARENT on the child.
+ *
+ * These tests exercise the consumer API and check that the state of the
+ * child and parent are sane and consistent.
+ */
+static struct kunit_suite
+clk_single_parent_mux_test_suite = {
+	.name = "clk-single-parent-mux-test",
+	.init = clk_single_parent_mux_test_init,
+	.exit = clk_single_parent_mux_test_exit,
+	.test_cases = clk_single_parent_mux_test_cases,
+};
+
 static int clk_orphan_transparent_single_parent_mux_test_init(struct kunit *test)
 {
 	struct clk_single_parent_ctx *ctx;
@@ -388,14 +563,6 @@ static int clk_orphan_transparent_single_parent_mux_test_init(struct kunit *test
 	return 0;
 }
 
-static void clk_orphan_transparent_single_parent_mux_test_exit(struct kunit *test)
-{
-	struct clk_single_parent_ctx *ctx = test->priv;
-
-	clk_hw_unregister(&ctx->hw);
-	clk_hw_unregister(&ctx->parent_ctx.hw);
-}
-
 /*
  * Test that a mux-only clock, with an initial rate within a range,
  * will still have the same rate after the range has been enforced.
@@ -440,7 +607,7 @@ static struct kunit_case clk_orphan_transparent_single_parent_mux_test_cases[] =
 static struct kunit_suite clk_orphan_transparent_single_parent_test_suite = {
 	.name = "clk-orphan-transparent-single-parent-test",
 	.init = clk_orphan_transparent_single_parent_mux_test_init,
-	.exit = clk_orphan_transparent_single_parent_mux_test_exit,
+	.exit = clk_single_parent_mux_test_exit,
 	.test_cases = clk_orphan_transparent_single_parent_mux_test_cases,
 };
 
@@ -1125,6 +1292,7 @@ kunit_test_suites(
 	&clk_range_test_suite,
 	&clk_range_maximize_test_suite,
 	&clk_range_minimize_test_suite,
+	&clk_single_parent_mux_test_suite,
 	&clk_uncached_test_suite
 );
 MODULE_LICENSE("GPL v2");
-- 
2.36.1


  parent reply	other threads:[~2022-05-16 13:27 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-16 13:24 [PATCH v5 00/28] clk: More clock rate fixes and tests Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 01/28] clk: Drop the rate range on clk_put() Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 02/28] clk: Skip clamping when rounding if there's no boundaries Maxime Ripard
2022-06-27 23:21   ` Stephen Boyd
2022-06-28  8:58     ` Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 03/28] clk: Introduce clk_get_rate_range() Maxime Ripard
2022-06-27 23:23   ` Stephen Boyd
2022-05-16 13:25 ` [PATCH v5 04/28] drm/vc4: hdmi: Rework hdmi_enable_4kp60 detection Maxime Ripard
2022-06-27 23:31   ` Stephen Boyd
2022-06-28  9:47     ` Maxime Ripard
2022-06-29  8:48       ` Stephen Boyd
2022-06-29  9:29         ` Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 05/28] clk: Mention that .recalc_rate can return 0 on error Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 06/28] clk: Clarify clk_get_rate() expectations Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 07/28] clk: tests: Add test suites description Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 08/28] clk: tests: Add reference to the orphan mux bug report Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 09/28] clk: tests: Add tests for uncached clock Maxime Ripard
2022-05-16 13:25 ` Maxime Ripard [this message]
2022-05-16 13:25 ` [PATCH v5 11/28] clk: tests: Add tests for mux with multiple parents Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 12/28] clk: tests: Add some tests for orphan " Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 13/28] clk: Take into account uncached clocks in clk_set_rate_range() Maxime Ripard
2022-06-29  9:01   ` Stephen Boyd
2022-06-29 12:42     ` Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 14/28] clk: Fix clk_get_parent() documentation Maxime Ripard
2022-06-29  9:05   ` Stephen Boyd
2022-06-29 13:12     ` Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 15/28] clk: Set req_rate on reparenting Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 16/28] clk: Change clk_core_init_rate_req prototype Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 17/28] clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 18/28] clk: Introduce clk_hw_init_rate_request() Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 19/28] clk: Add our request boundaries in clk_core_init_rate_req Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 20/28] clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 21/28] clk: Introduce clk_core_has_parent() Maxime Ripard
2022-06-29  9:11   ` Stephen Boyd
2022-05-16 13:25 ` [PATCH v5 22/28] clk: Stop forwarding clk_rate_requests to the parent Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 23/28] clk: Zero the clk_rate_request structure Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 24/28] clk: Test the clock pointer in clk_hw_get_name() Maxime Ripard
2022-06-29  9:13   ` Stephen Boyd
2022-06-29  9:39     ` Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 25/28] clk: Introduce the clk_hw_get_rate_range function Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 26/28] clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 27/28] clk: tests: Add some tests for clk_get_rate_range() Maxime Ripard
2022-05-16 13:25 ` [PATCH v5 28/28] clk: tests: Add missing test case for ranges Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220516132527.328190-11-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=jbrunet@baylibre.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mturquette@baylibre.com \
    --cc=naresh.kamboju@linaro.org \
    --cc=narmstrong@baylibre.com \
    --cc=sboyd@kernel.org \
    --cc=tony@atomide.com \
    --cc=y.oudjana@protonmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.