From: Xiaojuan Yang <yangxiaojuan@loongson.cn>
To: qemu-devel@nongnu.org
Cc: richard.henderson@linaro.org, gaosong@loongson.cn,
mark.cave-ayland@ilande.co.uk, mst@redhat.com,
imammedo@redhat.com, ani@anisinha.ca
Subject: [PATCH v4 07/43] target/loongarch: Add fixed point load/store instruction translation
Date: Tue, 17 May 2022 19:29:47 +0800 [thread overview]
Message-ID: <20220517113023.3051143-8-yangxiaojuan@loongson.cn> (raw)
In-Reply-To: <20220517113023.3051143-1-yangxiaojuan@loongson.cn>
From: Song Gao <gaosong@loongson.cn>
This includes:
- LD.{B[U]/H[U]/W[U]/D}, ST.{B/H/W/D}
- LDX.{B[U]/H[U]/W[U]/D}, STX.{B/H/W/D}
- LDPTR.{W/D}, STPTR.{W/D}
- PRELD
- LD{GT/LE}.{B/H/W/D}, ST{GT/LE}.{B/H/W/D}
- DBAR, IBAR
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
target/loongarch/helper.h | 3 +
.../loongarch/insn_trans/trans_memory.c.inc | 229 ++++++++++++++++++
target/loongarch/insns.decode | 55 +++++
target/loongarch/op_helper.c | 15 ++
target/loongarch/translate.c | 6 +
5 files changed, 308 insertions(+)
create mode 100644 target/loongarch/insn_trans/trans_memory.c.inc
diff --git a/target/loongarch/helper.h b/target/loongarch/helper.h
index 04e0245d5e..100622bfc2 100644
--- a/target/loongarch/helper.h
+++ b/target/loongarch/helper.h
@@ -8,3 +8,6 @@ DEF_HELPER_2(raise_exception, noreturn, env, i32)
DEF_HELPER_FLAGS_1(bitrev_w, TCG_CALL_NO_RWG_SE, tl, tl)
DEF_HELPER_FLAGS_1(bitrev_d, TCG_CALL_NO_RWG_SE, tl, tl)
DEF_HELPER_FLAGS_1(bitswap, TCG_CALL_NO_RWG_SE, tl, tl)
+
+DEF_HELPER_FLAGS_3(asrtle_d, TCG_CALL_NO_WG, void, env, tl, tl)
+DEF_HELPER_FLAGS_3(asrtgt_d, TCG_CALL_NO_WG, void, env, tl, tl)
diff --git a/target/loongarch/insn_trans/trans_memory.c.inc b/target/loongarch/insn_trans/trans_memory.c.inc
new file mode 100644
index 0000000000..10914acf52
--- /dev/null
+++ b/target/loongarch/insn_trans/trans_memory.c.inc
@@ -0,0 +1,229 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (c) 2021 Loongson Technology Corporation Limited
+ */
+
+static bool gen_load(DisasContext *ctx, arg_rr_i *a, MemOp mop)
+{
+ TCGv dest = gpr_dst(ctx, a->rd, EXT_NONE);
+ TCGv addr = gpr_src(ctx, a->rj, EXT_NONE);
+ TCGv temp = NULL;
+
+ if (a->imm) {
+ temp = tcg_temp_new();
+ tcg_gen_addi_tl(temp, addr, a->imm);
+ addr = temp;
+ }
+
+ tcg_gen_qemu_ld_tl(dest, addr, ctx->mem_idx, mop);
+ gen_set_gpr(a->rd, dest, EXT_NONE);
+
+ if (temp) {
+ tcg_temp_free(temp);
+ }
+
+ return true;
+}
+
+static bool gen_store(DisasContext *ctx, arg_rr_i *a, MemOp mop)
+{
+ TCGv data = gpr_src(ctx, a->rd, EXT_NONE);
+ TCGv addr = gpr_src(ctx, a->rj, EXT_NONE);
+ TCGv temp = NULL;
+
+ if (a->imm) {
+ temp = tcg_temp_new();
+ tcg_gen_addi_tl(temp, addr, a->imm);
+ addr = temp;
+ }
+
+ tcg_gen_qemu_st_tl(data, addr, ctx->mem_idx, mop);
+
+ if (temp) {
+ tcg_temp_free(temp);
+ }
+
+ return true;
+}
+
+static bool gen_loadx(DisasContext *ctx, arg_rrr *a, MemOp mop)
+{
+ TCGv dest = gpr_dst(ctx, a->rd, EXT_NONE);
+ TCGv src1 = gpr_src(ctx, a->rj, EXT_NONE);
+ TCGv src2 = gpr_src(ctx, a->rk, EXT_NONE);
+ TCGv addr = tcg_temp_new();
+
+ tcg_gen_add_tl(addr, src1, src2);
+ tcg_gen_qemu_ld_tl(dest, addr, ctx->mem_idx, mop);
+ gen_set_gpr(a->rd, dest, EXT_NONE);
+ tcg_temp_free(addr);
+
+ return true;
+}
+
+static bool gen_storex(DisasContext *ctx, arg_rrr *a, MemOp mop)
+{
+ TCGv data = gpr_src(ctx, a->rd, EXT_NONE);
+ TCGv src1 = gpr_src(ctx, a->rj, EXT_NONE);
+ TCGv src2 = gpr_src(ctx, a->rk, EXT_NONE);
+ TCGv addr = tcg_temp_new();
+
+ tcg_gen_add_tl(addr, src1, src2);
+ tcg_gen_qemu_st_tl(data, addr, ctx->mem_idx, mop);
+ tcg_temp_free(addr);
+
+ return true;
+}
+
+static bool gen_load_gt(DisasContext *ctx, arg_rrr *a, MemOp mop)
+{
+ TCGv dest = gpr_dst(ctx, a->rd, EXT_NONE);
+ TCGv src1 = gpr_src(ctx, a->rj, EXT_NONE);
+ TCGv src2 = gpr_src(ctx, a->rk, EXT_NONE);
+
+ gen_helper_asrtgt_d(cpu_env, src1, src2);
+ tcg_gen_qemu_ld_tl(dest, src1, ctx->mem_idx, mop);
+ gen_set_gpr(a->rd, dest, EXT_NONE);
+
+ return true;
+}
+
+static bool gen_load_le(DisasContext *ctx, arg_rrr *a, MemOp mop)
+{
+ TCGv dest = gpr_dst(ctx, a->rd, EXT_NONE);
+ TCGv src1 = gpr_src(ctx, a->rj, EXT_NONE);
+ TCGv src2 = gpr_src(ctx, a->rk, EXT_NONE);
+
+ gen_helper_asrtle_d(cpu_env, src1, src2);
+ tcg_gen_qemu_ld_tl(dest, src1, ctx->mem_idx, mop);
+ gen_set_gpr(a->rd, dest, EXT_NONE);
+
+ return true;
+}
+
+static bool gen_store_gt(DisasContext *ctx, arg_rrr *a, MemOp mop)
+{
+ TCGv data = gpr_src(ctx, a->rd, EXT_NONE);
+ TCGv src1 = gpr_src(ctx, a->rj, EXT_NONE);
+ TCGv src2 = gpr_src(ctx, a->rk, EXT_NONE);
+
+ gen_helper_asrtgt_d(cpu_env, src1, src2);
+ tcg_gen_qemu_st_tl(data, src1, ctx->mem_idx, mop);
+
+ return true;
+}
+
+static bool gen_store_le(DisasContext *ctx, arg_rrr *a, MemOp mop)
+{
+ TCGv data = gpr_src(ctx, a->rd, EXT_NONE);
+ TCGv src1 = gpr_src(ctx, a->rj, EXT_NONE);
+ TCGv src2 = gpr_src(ctx, a->rk, EXT_NONE);
+
+ gen_helper_asrtle_d(cpu_env, src1, src2);
+ tcg_gen_qemu_st_tl(data, src1, ctx->mem_idx, mop);
+
+ return true;
+}
+
+static bool trans_preld(DisasContext *ctx, arg_preld *a)
+{
+ return true;
+}
+
+static bool trans_dbar(DisasContext *ctx, arg_dbar * a)
+{
+ tcg_gen_mb(TCG_BAR_SC | TCG_MO_ALL);
+ return true;
+}
+
+static bool trans_ibar(DisasContext *ctx, arg_ibar *a)
+{
+ ctx->base.is_jmp = DISAS_STOP;
+ return true;
+}
+
+static bool gen_ldptr(DisasContext *ctx, arg_rr_i *a, MemOp mop)
+{
+ TCGv dest = gpr_dst(ctx, a->rd, EXT_NONE);
+ TCGv addr = gpr_src(ctx, a->rj, EXT_NONE);
+ TCGv temp = NULL;
+
+ if (a->imm) {
+ temp = tcg_temp_new();
+ tcg_gen_addi_tl(temp, addr, a->imm);
+ addr = temp;
+ }
+
+ tcg_gen_qemu_ld_tl(dest, addr, ctx->mem_idx, mop);
+ gen_set_gpr(a->rd, dest, EXT_NONE);
+
+ if (temp) {
+ tcg_temp_free(temp);
+ }
+
+ return true;
+}
+
+static bool gen_stptr(DisasContext *ctx, arg_rr_i *a, MemOp mop)
+{
+ TCGv data = gpr_src(ctx, a->rd, EXT_NONE);
+ TCGv addr = gpr_src(ctx, a->rj, EXT_NONE);
+ TCGv temp = NULL;
+
+ if (a->imm) {
+ temp = tcg_temp_new();
+ tcg_gen_addi_tl(temp, addr, a->im);
+ addr = temp;
+ }
+
+ tcg_gen_qemu_st_tl(data, addr, ctx->mem_idx, mop);
+
+ if (temp) {
+ tcg_temp_free(temp);
+ }
+
+ return true;
+}
+
+TRANS(ld_b, gen_load, MO_SB)
+TRANS(ld_h, gen_load, MO_TESW)
+TRANS(ld_w, gen_load, MO_TESL)
+TRANS(ld_d, gen_load, MO_TEUQ)
+TRANS(st_b, gen_store, MO_UB)
+TRANS(st_h, gen_store, MO_TEUW)
+TRANS(st_w, gen_store, MO_TEUL)
+TRANS(st_d, gen_store, MO_TEUQ)
+TRANS(ld_bu, gen_load, MO_UB)
+TRANS(ld_hu, gen_load, MO_TEUW)
+TRANS(ld_wu, gen_load, MO_TEUL)
+TRANS(ldx_b, gen_loadx, MO_SB)
+TRANS(ldx_h, gen_loadx, MO_TESW)
+TRANS(ldx_w, gen_loadx, MO_TESL)
+TRANS(ldx_d, gen_loadx, MO_TEUQ)
+TRANS(stx_b, gen_storex, MO_UB)
+TRANS(stx_h, gen_storex, MO_TEUW)
+TRANS(stx_w, gen_storex, MO_TEUL)
+TRANS(stx_d, gen_storex, MO_TEUQ)
+TRANS(ldx_bu, gen_loadx, MO_UB)
+TRANS(ldx_hu, gen_loadx, MO_TEUW)
+TRANS(ldx_wu, gen_loadx, MO_TEUL)
+TRANS(ldptr_w, gen_ldptr, MO_TESL)
+TRANS(stptr_w, gen_stptr, MO_TEUL)
+TRANS(ldptr_d, gen_ldptr, MO_TEUQ)
+TRANS(stptr_d, gen_stptr, MO_TEUQ)
+TRANS(ldgt_b, gen_load_gt, MO_SB)
+TRANS(ldgt_h, gen_load_gt, MO_TESW)
+TRANS(ldgt_w, gen_load_gt, MO_TESL)
+TRANS(ldgt_d, gen_load_gt, MO_TEUQ)
+TRANS(ldle_b, gen_load_le, MO_SB)
+TRANS(ldle_h, gen_load_le, MO_TESW)
+TRANS(ldle_w, gen_load_le, MO_TESL)
+TRANS(ldle_d, gen_load_le, MO_TEUQ)
+TRANS(stgt_b, gen_store_gt, MO_UB)
+TRANS(stgt_h, gen_store_gt, MO_TEUW)
+TRANS(stgt_w, gen_store_gt, MO_TEUL)
+TRANS(stgt_d, gen_store_gt, MO_TEUQ)
+TRANS(stle_b, gen_store_le, MO_UB)
+TRANS(stle_h, gen_store_le, MO_TEUW)
+TRANS(stle_w, gen_store_le, MO_TEUL)
+TRANS(stle_d, gen_store_le, MO_TEUQ)
diff --git a/target/loongarch/insns.decode b/target/loongarch/insns.decode
index b0bed5531b..1156e6965c 100644
--- a/target/loongarch/insns.decode
+++ b/target/loongarch/insns.decode
@@ -8,21 +8,25 @@
#
# Fields
#
+%i14s2 10:s14 !function=shl_2
%sa2p1 15:2 !function=plus_1
#
# Argument sets
#
+&i imm
&r_i rd imm
&rr rd rj
&rrr rd rj rk
&rr_i rd rj imm
+&hint_r_i hint rj imm
&rrr_sa rd rj rk sa
&rr_ms_ls rd rj ms ls
#
# Formats
#
+@i15 .... ........ ..... imm:15 &i
@rr .... ........ ..... ..... rj:5 rd:5 &rr
@rrr .... ........ ..... rk:5 rj:5 rd:5 &rrr
@r_i20 .... ... imm:s20 rd:5 &r_i
@@ -30,7 +34,9 @@
@rr_ui6 .... ........ .... imm:6 rj:5 rd:5 &rr_i
@rr_i12 .... ...... imm:s12 rj:5 rd:5 &rr_i
@rr_ui12 .... ...... imm:12 rj:5 rd:5 &rr_i
+@rr_i14s2 .... .... .............. rj:5 rd:5 &rr_i imm=%i14s2
@rr_i16 .... .. imm:s16 rj:5 rd:5 &rr_i
+@hint_r_i12 .... ...... imm:s12 rj:5 hint:5 &hint_r_i
@rrr_sa2p1 .... ........ ... .. rk:5 rj:5 rd:5 &rrr_sa sa=%sa2p1
@rrr_sa2 .... ........ ... sa:2 rk:5 rj:5 rd:5 &rrr_sa
@rrr_sa3 .... ........ .. sa:3 rk:5 rj:5 rd:5 &rrr_sa
@@ -138,3 +144,52 @@ bstrins_w 0000 0000011 ..... 0 ..... ..... ..... @rr_2bw
bstrpick_w 0000 0000011 ..... 1 ..... ..... ..... @rr_2bw
bstrins_d 0000 000010 ...... ...... ..... ..... @rr_2bd
bstrpick_d 0000 000011 ...... ...... ..... ..... @rr_2bd
+
+#
+# Fixed point load/store instruction
+#
+ld_b 0010 100000 ............ ..... ..... @rr_i12
+ld_h 0010 100001 ............ ..... ..... @rr_i12
+ld_w 0010 100010 ............ ..... ..... @rr_i12
+ld_d 0010 100011 ............ ..... ..... @rr_i12
+st_b 0010 100100 ............ ..... ..... @rr_i12
+st_h 0010 100101 ............ ..... ..... @rr_i12
+st_w 0010 100110 ............ ..... ..... @rr_i12
+st_d 0010 100111 ............ ..... ..... @rr_i12
+ld_bu 0010 101000 ............ ..... ..... @rr_i12
+ld_hu 0010 101001 ............ ..... ..... @rr_i12
+ld_wu 0010 101010 ............ ..... ..... @rr_i12
+ldx_b 0011 10000000 00000 ..... ..... ..... @rrr
+ldx_h 0011 10000000 01000 ..... ..... ..... @rrr
+ldx_w 0011 10000000 10000 ..... ..... ..... @rrr
+ldx_d 0011 10000000 11000 ..... ..... ..... @rrr
+stx_b 0011 10000001 00000 ..... ..... ..... @rrr
+stx_h 0011 10000001 01000 ..... ..... ..... @rrr
+stx_w 0011 10000001 10000 ..... ..... ..... @rrr
+stx_d 0011 10000001 11000 ..... ..... ..... @rrr
+ldx_bu 0011 10000010 00000 ..... ..... ..... @rrr
+ldx_hu 0011 10000010 01000 ..... ..... ..... @rrr
+ldx_wu 0011 10000010 10000 ..... ..... ..... @rrr
+preld 0010 101011 ............ ..... ..... @hint_r_i12
+dbar 0011 10000111 00100 ............... @i15
+ibar 0011 10000111 00101 ............... @i15
+ldptr_w 0010 0100 .............. ..... ..... @rr_i14s2
+stptr_w 0010 0101 .............. ..... ..... @rr_i14s2
+ldptr_d 0010 0110 .............. ..... ..... @rr_i14s2
+stptr_d 0010 0111 .............. ..... ..... @rr_i14s2
+ldgt_b 0011 10000111 10000 ..... ..... ..... @rrr
+ldgt_h 0011 10000111 10001 ..... ..... ..... @rrr
+ldgt_w 0011 10000111 10010 ..... ..... ..... @rrr
+ldgt_d 0011 10000111 10011 ..... ..... ..... @rrr
+ldle_b 0011 10000111 10100 ..... ..... ..... @rrr
+ldle_h 0011 10000111 10101 ..... ..... ..... @rrr
+ldle_w 0011 10000111 10110 ..... ..... ..... @rrr
+ldle_d 0011 10000111 10111 ..... ..... ..... @rrr
+stgt_b 0011 10000111 11000 ..... ..... ..... @rrr
+stgt_h 0011 10000111 11001 ..... ..... ..... @rrr
+stgt_w 0011 10000111 11010 ..... ..... ..... @rrr
+stgt_d 0011 10000111 11011 ..... ..... ..... @rrr
+stle_b 0011 10000111 11100 ..... ..... ..... @rrr
+stle_h 0011 10000111 11101 ..... ..... ..... @rrr
+stle_w 0011 10000111 11110 ..... ..... ..... @rrr
+stle_d 0011 10000111 11111 ..... ..... ..... @rrr
diff --git a/target/loongarch/op_helper.c b/target/loongarch/op_helper.c
index f4b22c70a0..bd2db783c9 100644
--- a/target/loongarch/op_helper.c
+++ b/target/loongarch/op_helper.c
@@ -40,3 +40,18 @@ target_ulong helper_bitswap(target_ulong v)
((v & (target_ulong)0x0F0F0F0F0F0F0F0FULL) << 4);
return v;
}
+
+/* loongarch assert op */
+void helper_asrtle_d(CPULoongArchState *env, target_ulong rj, target_ulong rk)
+{
+ if (rj > rk) {
+ do_raise_exception(env, EXCCODE_ADEM, GETPC());
+ }
+}
+
+void helper_asrtgt_d(CPULoongArchState *env, target_ulong rj, target_ulong rk)
+{
+ if (rj <= rk) {
+ do_raise_exception(env, EXCCODE_ADEM, GETPC());
+ }
+}
diff --git a/target/loongarch/translate.c b/target/loongarch/translate.c
index 8c7c3968c9..3b8ada08ed 100644
--- a/target/loongarch/translate.c
+++ b/target/loongarch/translate.c
@@ -31,6 +31,11 @@ static inline int plus_1(DisasContext *ctx, int x)
return x + 1;
}
+static inline int shl_2(DisasContext *ctx, int x)
+{
+ return x << 2;
+}
+
void generate_exception(DisasContext *ctx, int excp)
{
tcg_gen_movi_tl(cpu_pc, ctx->base.pc_next);
@@ -148,6 +153,7 @@ static void gen_set_gpr(int reg_num, TCGv t, DisasExtend dst_ext)
#include "insn_trans/trans_arith.c.inc"
#include "insn_trans/trans_shift.c.inc"
#include "insn_trans/trans_bit.c.inc"
+#include "insn_trans/trans_memory.c.inc"
static void loongarch_tr_translate_insn(DisasContextBase *dcbase, CPUState *cs)
{
--
2.31.1
next prev parent reply other threads:[~2022-05-17 12:02 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-17 11:29 [PATCH v4 00/43] Add LoongArch softmmu support Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 01/43] target/loongarch: Add README Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 02/43] target/loongarch: Add core definition Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 03/43] target/loongarch: Add main translation routines Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 04/43] target/loongarch: Add fixed point arithmetic instruction translation Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 05/43] target/loongarch: Add fixed point shift " Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 06/43] target/loongarch: Add fixed point bit " Xiaojuan Yang
2022-05-17 11:29 ` Xiaojuan Yang [this message]
2022-05-17 11:29 ` [PATCH v4 08/43] target/loongarch: Add fixed point atomic " Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 09/43] target/loongarch: Add fixed point extra " Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 10/43] target/loongarch: Add floating point arithmetic " Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 11/43] target/loongarch: Add floating point comparison " Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 12/43] target/loongarch: Add floating point conversion " Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 13/43] target/loongarch: Add floating point move " Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 14/43] target/loongarch: Add floating point load/store " Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 15/43] target/loongarch: Add branch " Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 16/43] target/loongarch: Add disassembler Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 17/43] target/loongarch: Add target build suport Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 18/43] target/loongarch: Add system emulation introduction Xiaojuan Yang
2022-05-17 11:29 ` [PATCH v4 19/43] target/loongarch: Add CSRs definition Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 20/43] target/loongarch: Add basic vmstate description of CPU Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 21/43] target/loongarch: Implement qmp_query_cpu_definitions() Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 22/43] target/loongarch: Add MMU support for LoongArch CPU Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 23/43] target/loongarch: Add LoongArch interrupt and exception handle Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 24/43] target/loongarch: Add constant timer support Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 25/43] target/loongarch: Add LoongArch CSR instruction Xiaojuan Yang
2022-05-18 17:18 ` Richard Henderson
2022-05-17 11:30 ` [PATCH v4 26/43] target/loongarch: Add LoongArch IOCSR instruction Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 27/43] target/loongarch: Add TLB instruction support Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 28/43] target/loongarch: Add other core instructions support Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 29/43] target/loongarch: Add timer related " Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 30/43] hw/loongarch: Add support loongson3 virt machine type Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 31/43] hw/loongarch: Add LoongArch ipi interrupt support(IPI) Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 32/43] hw/intc: Add LoongArch ls7a interrupt controller support(PCH-PIC) Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 33/43] hw/intc: Add LoongArch ls7a msi interrupt controller support(PCH-MSI) Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 34/43] hw/intc: Add LoongArch extioi interrupt controller(EIOINTC) Xiaojuan Yang
2022-05-18 18:04 ` Richard Henderson
2022-05-19 3:03 ` yangxiaojuan
2022-05-17 11:30 ` [PATCH v4 35/43] hw/loongarch: Add irq hierarchy for the system Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 36/43] Enable common virtio pci support for LoongArch Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 37/43] hw/loongarch: Add some devices support for 3A5000 Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 38/43] hw/loongarch: Add LoongArch ls7a rtc device support Xiaojuan Yang
2022-05-18 19:59 ` Richard Henderson
2022-05-19 13:04 ` yangxiaojuan
2022-05-19 15:24 ` Richard Henderson
2022-05-20 10:07 ` yangxiaojuan
2022-05-17 11:30 ` [PATCH v4 39/43] hw/loongarch: Add LoongArch load elf function Xiaojuan Yang
2022-05-18 20:01 ` Richard Henderson
2022-05-17 11:30 ` [PATCH v4 40/43] hw/loongarch: Add LoongArch ls7a acpi device support Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 41/43] target/loongarch: Add gdb support Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 42/43] tests/tcg/loongarch64: Add hello/memory test in loongarch64 system Xiaojuan Yang
2022-05-17 11:30 ` [PATCH v4 43/43] target/loongarch: 'make check-tcg' support Xiaojuan Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220517113023.3051143-8-yangxiaojuan@loongson.cn \
--to=yangxiaojuan@loongson.cn \
--cc=ani@anisinha.ca \
--cc=gaosong@loongson.cn \
--cc=imammedo@redhat.com \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.