From: Yu Kuai <yukuai3@huawei.com>
To: <josef@toxicpanda.com>, <axboe@kernel.dk>, <yukuai3@huawei.com>,
<ming.lei@redhat.com>
Cc: <linux-block@vger.kernel.org>, <nbd@other.debian.org>,
<linux-kernel@vger.kernel.org>, <yi.zhang@huawei.com>
Subject: [PATCH -next v3 6/6] nbd: use pr_err to output error message
Date: Sat, 21 May 2022 15:37:49 +0800 [thread overview]
Message-ID: <20220521073749.3146892-7-yukuai3@huawei.com> (raw)
In-Reply-To: <20220521073749.3146892-1-yukuai3@huawei.com>
Instead of using the long printk(KERN_ERR "nbd: ...") to
output error message, defining pr_fmt and using
the short pr_err("") to do that. The replacemen is done
by using the following command:
sed -i 's/printk(KERN_ERR "nbd: /pr_err("/g' \
drivers/block/nbd.c
This patch also rewrap to 80 columns where possible.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
drivers/block/nbd.c | 40 ++++++++++++++++++----------------------
1 file changed, 18 insertions(+), 22 deletions(-)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 349bc3da878d..07f3c139a3d7 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -1928,16 +1928,16 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
* MKDEV() expect that the max bits of first_minor is 20.
*/
if (index < 0 || index > MINORMASK >> part_shift) {
- printk(KERN_ERR "nbd: illegal input index %d\n", index);
+ pr_err("illegal input index %d\n", index);
return -EINVAL;
}
}
if (!info->attrs[NBD_ATTR_SOCKETS]) {
- printk(KERN_ERR "nbd: must specify at least one socket\n");
+ pr_err("must specify at least one socket\n");
return -EINVAL;
}
if (!info->attrs[NBD_ATTR_SIZE_BYTES]) {
- printk(KERN_ERR "nbd: must specify a size in bytes for the device\n");
+ pr_err("must specify a size in bytes for the device\n");
return -EINVAL;
}
again:
@@ -1973,7 +1973,7 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
nbd_put(nbd);
if (index == -1)
goto again;
- printk(KERN_ERR "nbd: nbd%d already in use\n", index);
+ pr_err("nbd%d already in use\n", index);
return -EBUSY;
}
if (WARN_ON(nbd->config)) {
@@ -1985,7 +1985,7 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
if (IS_ERR(config)) {
mutex_unlock(&nbd->config_lock);
nbd_put(nbd);
- printk(KERN_ERR "nbd: couldn't allocate config\n");
+ pr_err("couldn't allocate config\n");
return PTR_ERR(config);
}
nbd->config = config;
@@ -2041,7 +2041,7 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
struct nlattr *socks[NBD_SOCK_MAX+1];
if (nla_type(attr) != NBD_SOCK_ITEM) {
- printk(KERN_ERR "nbd: socks must be embedded in a SOCK_ITEM attr\n");
+ pr_err("socks must be embedded in a SOCK_ITEM attr\n");
ret = -EINVAL;
goto out;
}
@@ -2050,7 +2050,7 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
nbd_sock_policy,
info->extack);
if (ret != 0) {
- printk(KERN_ERR "nbd: error processing sock list\n");
+ pr_err("error processing sock list\n");
ret = -EINVAL;
goto out;
}
@@ -2122,7 +2122,7 @@ static int nbd_genl_disconnect(struct sk_buff *skb, struct genl_info *info)
return -EPERM;
if (!info->attrs[NBD_ATTR_INDEX]) {
- printk(KERN_ERR "nbd: must specify an index to disconnect\n");
+ pr_err("must specify an index to disconnect\n");
return -EINVAL;
}
index = nla_get_u32(info->attrs[NBD_ATTR_INDEX]);
@@ -2130,14 +2130,12 @@ static int nbd_genl_disconnect(struct sk_buff *skb, struct genl_info *info)
nbd = idr_find(&nbd_index_idr, index);
if (!nbd) {
mutex_unlock(&nbd_index_mutex);
- printk(KERN_ERR "nbd: couldn't find device at index %d\n",
- index);
+ pr_err("couldn't find device at index %d\n", index);
return -EINVAL;
}
if (!refcount_inc_not_zero(&nbd->refs)) {
mutex_unlock(&nbd_index_mutex);
- printk(KERN_ERR "nbd: device at index %d is going down\n",
- index);
+ pr_err("device at index %d is going down\n", index);
return -EINVAL;
}
mutex_unlock(&nbd_index_mutex);
@@ -2162,7 +2160,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
return -EPERM;
if (!info->attrs[NBD_ATTR_INDEX]) {
- printk(KERN_ERR "nbd: must specify a device to reconfigure\n");
+ pr_err("must specify a device to reconfigure\n");
return -EINVAL;
}
index = nla_get_u32(info->attrs[NBD_ATTR_INDEX]);
@@ -2170,8 +2168,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
nbd = idr_find(&nbd_index_idr, index);
if (!nbd) {
mutex_unlock(&nbd_index_mutex);
- printk(KERN_ERR "nbd: couldn't find a device at index %d\n",
- index);
+ pr_err("couldn't find a device at index %d\n", index);
return -EINVAL;
}
if (nbd->backend) {
@@ -2192,8 +2189,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
}
if (!refcount_inc_not_zero(&nbd->refs)) {
mutex_unlock(&nbd_index_mutex);
- printk(KERN_ERR "nbd: device at index %d is going down\n",
- index);
+ pr_err("device at index %d is going down\n", index);
return -EINVAL;
}
mutex_unlock(&nbd_index_mutex);
@@ -2257,7 +2253,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
struct nlattr *socks[NBD_SOCK_MAX+1];
if (nla_type(attr) != NBD_SOCK_ITEM) {
- printk(KERN_ERR "nbd: socks must be embedded in a SOCK_ITEM attr\n");
+ pr_err("socks must be embedded in a SOCK_ITEM attr\n");
ret = -EINVAL;
goto out;
}
@@ -2266,7 +2262,7 @@ static int nbd_genl_reconfigure(struct sk_buff *skb, struct genl_info *info)
nbd_sock_policy,
info->extack);
if (ret != 0) {
- printk(KERN_ERR "nbd: error processing sock list\n");
+ pr_err("error processing sock list\n");
ret = -EINVAL;
goto out;
}
@@ -2483,7 +2479,7 @@ static int __init nbd_init(void)
BUILD_BUG_ON(sizeof(struct nbd_request) != 28);
if (max_part < 0) {
- printk(KERN_ERR "nbd: max_part must be >= 0\n");
+ pr_err("max_part must be >= 0\n");
return -EINVAL;
}
@@ -2562,10 +2558,10 @@ static void __exit nbd_cleanup(void)
nbd = list_first_entry(&del_list, struct nbd_device, list);
list_del_init(&nbd->list);
if (refcount_read(&nbd->config_refs))
- printk(KERN_ERR "nbd: possibly leaking nbd_config (ref %d)\n",
+ pr_err("possibly leaking nbd_config (ref %d)\n",
refcount_read(&nbd->config_refs));
if (refcount_read(&nbd->refs) != 1)
- printk(KERN_ERR "nbd: possibly leaking a device\n");
+ pr_err("possibly leaking a device\n");
nbd_put(nbd);
}
--
2.31.1
next prev parent reply other threads:[~2022-05-21 7:24 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-21 7:37 [PATCH -next v3 0/6] nbd: bugfix and cleanup patches Yu Kuai
2022-05-21 7:37 ` [PATCH -next v3 1/6] nbd: call genl_unregister_family() first in nbd_cleanup() Yu Kuai
2022-05-23 14:13 ` Josef Bacik
2022-05-21 7:37 ` [PATCH -next v3 2/6] nbd: fix race between nbd_alloc_config() and module removal Yu Kuai
2022-05-23 14:14 ` Josef Bacik
2022-05-21 7:37 ` [PATCH -next v3 3/6] nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed Yu Kuai
2022-05-23 14:12 ` Josef Bacik
2022-05-24 1:07 ` Yu Kuai
2022-05-24 1:51 ` Yu Kuai
2022-05-21 7:37 ` [PATCH -next v3 4/6] nbd: fix io hung while disconnecting device Yu Kuai
2022-05-23 14:15 ` Josef Bacik
2022-05-21 7:37 ` [PATCH -next v3 5/6] nbd: fix possible overflow on 'first_minor' in nbd_dev_add() Yu Kuai
2022-05-23 14:15 ` Josef Bacik
2022-05-21 7:37 ` Yu Kuai [this message]
2022-05-23 14:16 ` [PATCH -next v3 6/6] nbd: use pr_err to output error message Josef Bacik
2022-05-28 12:20 ` [PATCH -next v3 0/6] nbd: bugfix and cleanup patches Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220521073749.3146892-7-yukuai3@huawei.com \
--to=yukuai3@huawei.com \
--cc=axboe@kernel.dk \
--cc=josef@toxicpanda.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ming.lei@redhat.com \
--cc=nbd@other.debian.org \
--cc=yi.zhang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.