All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Chang S. Bae" <chang.seok.bae@intel.com>
To: peterz@infradead.org, linux-kernel@vger.kernel.org,
	dave.hansen@linux.intel.com
Cc: linux-tip-commits@vger.kernel.org, rui.zhang@intel.com,
	rafael.j.wysocki@intel.com, x86@kernel.org,
	"Chang S. Bae" <chang.seok.bae@intel.com>
Subject: [PATCH][Rebased] intel_idle: Add a new flag to initialize the AMX state
Date: Tue, 14 Jun 2022 09:41:16 -0700	[thread overview]
Message-ID: <20220614164116.5196-1-chang.seok.bae@intel.com> (raw)
In-Reply-To: <YqHKKa/yamRS06tC@worktop.programming.kicks-ass.net>

The non-initialized AMX state can be the cause of C-state demotion from C6
to C1E. This low-power idle state may improve power savings and thus result
in a higher available turbo frequency budget.

This behavior is implementation-specific. Initialize the state for the C6
entrance of Sapphire Rapids as needed.

Tested-by: Zhang Rui <rui.zhang@intel.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20220608164748.11864-3-chang.seok.bae@intel.com
[changb: Rebase to the upstream with peterz's help]
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
---
The patch merged in the tip's x86/fpu branch [1] has conflict with the
upstream -- commit 32d4fd5751ea ("cpuidle,intel_idle: Fix
CPUIDLE_FLAG_IRQ_ENABLE") as of v5.19-rc2.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/log/?h=x86/fpu
---
 drivers/idle/intel_idle.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 424ef470223d..8a19ba1c2c1b 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -54,6 +54,7 @@
 #include <asm/intel-family.h>
 #include <asm/mwait.h>
 #include <asm/msr.h>
+#include <asm/fpu/api.h>
 
 #define INTEL_IDLE_VERSION "0.5.1"
 
@@ -105,6 +106,11 @@ static unsigned int mwait_substates __initdata;
  */
 #define CPUIDLE_FLAG_ALWAYS_ENABLE	BIT(15)
 
+/*
+ * Initialize large xstate for the C6-state entrance.
+ */
+#define CPUIDLE_FLAG_INIT_XSTATE	BIT(16)
+
 /*
  * MWAIT takes an 8-bit "hint" in EAX "suggesting"
  * the C-state (top nibble) and sub-state (bottom nibble)
@@ -159,6 +165,13 @@ static __cpuidle int intel_idle_irq(struct cpuidle_device *dev,
 	return ret;
 }
 
+static __cpuidle int intel_idle_xstate(struct cpuidle_device *dev,
+				       struct cpuidle_driver *drv, int index)
+{
+	fpu_idle_fpregs();
+	return __intel_idle(dev, drv, index);
+}
+
 /**
  * intel_idle_s2idle - Ask the processor to enter the given idle state.
  * @dev: cpuidle device of the target CPU.
@@ -174,8 +187,12 @@ static __cpuidle int intel_idle_irq(struct cpuidle_device *dev,
 static __cpuidle int intel_idle_s2idle(struct cpuidle_device *dev,
 				       struct cpuidle_driver *drv, int index)
 {
-	unsigned long eax = flg2MWAIT(drv->states[index].flags);
 	unsigned long ecx = 1; /* break on interrupt flag */
+	struct cpuidle_state *state = &drv->states[index];
+	unsigned long eax = flg2MWAIT(state->flags);
+
+	if (state->flags & CPUIDLE_FLAG_INIT_XSTATE)
+		fpu_idle_fpregs();
 
 	mwait_idle_with_hints(eax, ecx);
 
@@ -910,7 +927,8 @@ static struct cpuidle_state spr_cstates[] __initdata = {
 	{
 		.name = "C6",
 		.desc = "MWAIT 0x20",
-		.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED |
+					   CPUIDLE_FLAG_INIT_XSTATE,
 		.exit_latency = 290,
 		.target_residency = 800,
 		.enter = &intel_idle,
@@ -1819,6 +1837,9 @@ static void __init intel_idle_init_cstates_icpu(struct cpuidle_driver *drv)
 		if (cpuidle_state_table[cstate].flags & CPUIDLE_FLAG_IRQ_ENABLE)
 			drv->states[drv->state_count].enter = intel_idle_irq;
 
+		if (cpuidle_state_table[cstate].flags & CPUIDLE_FLAG_INIT_XSTATE)
+			drv->states[drv->state_count].enter = intel_idle_xstate;
+
 		if ((disabled_states_mask & BIT(drv->state_count)) ||
 		    ((icpu->use_acpi || force_use_acpi) &&
 		     intel_idle_off_by_default(mwait_hint) &&
-- 
2.17.1


  reply	other threads:[~2022-06-14 16:51 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-08 16:47 [PATCH v5 0/2] x86/fpu: Make AMX state ready for CPU idle Chang S. Bae
2022-06-08 16:47 ` [PATCH v5 1/2] x86/fpu: Add a helper to prepare AMX state for low-power " Chang S. Bae
2022-06-08 19:32   ` [tip: x86/fpu] " tip-bot2 for Chang S. Bae
2022-06-14 22:46   ` tip-bot2 for Chang S. Bae
2022-06-14 22:53   ` tip-bot2 for Chang S. Bae
2022-07-19 17:31   ` tip-bot2 for Chang S. Bae
2022-06-08 16:47 ` [PATCH v5 2/2] intel_idle: Add a new flag to initialize the AMX state Chang S. Bae
2022-06-08 19:32   ` [tip: x86/fpu] " tip-bot2 for Chang S. Bae
2022-06-09 10:23     ` Peter Zijlstra
2022-06-14 16:41       ` Chang S. Bae [this message]
2022-07-19 17:31         ` tip-bot2 for Chang S. Bae
     [not found]   ` <38cd51750ef7b995506d001eae3e4ec872cf5b77.camel@linux.intel.com>
2022-06-14 17:23     ` [PATCH v5 2/2] " Chang S. Bae
2022-06-15  6:25       ` Artem Bityutskiy
2022-06-14 22:53   ` [tip: x86/fpu] " tip-bot2 for Chang S. Bae
2022-07-18  9:06     ` Borislav Petkov
2022-07-18 18:56       ` [PATCH][Rebased] " Chang S. Bae

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220614164116.5196-1-chang.seok.bae@intel.com \
    --to=chang.seok.bae@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tip-commits@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=rafael.j.wysocki@intel.com \
    --cc=rui.zhang@intel.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.