All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
	Sean Christopherson <seanjc@google.com>
Cc: Anirudh Rayabharam <anrayabh@linux.microsoft.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 14/25] KVM: VMX: Tweak the special handling of SECONDARY_EXEC_ENCLS_EXITING in setup_vmcs_config()
Date: Thu, 14 Jul 2022 11:13:16 +0200	[thread overview]
Message-ID: <20220714091327.1085353-15-vkuznets@redhat.com> (raw)
In-Reply-To: <20220714091327.1085353-1-vkuznets@redhat.com>

SECONDARY_EXEC_ENCLS_EXITING is conditionally added to the 'optional'
checklist in setup_vmcs_config() but there's little value in doing so.
First, as the control is optional, we can always check for its
presence, no harm done. Second, the only real value cpu_has_sgx() check
gives is that on the CPUs which support SECONDARY_EXEC_ENCLS_EXITING but
don't support SGX, the control is not getting enabled. It's highly unlikely
such CPUs exist but it's possible that some hypervisors expose broken vCPU
models.

Preserve cpu_has_sgx() check but filter the result of adjust_vmx_controls()
instead of the input.

Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
 arch/x86/kvm/vmx/vmx.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index ce54f13d8da1..566be73c6509 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2528,9 +2528,9 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 			SECONDARY_EXEC_PT_CONCEAL_VMX |
 			SECONDARY_EXEC_ENABLE_VMFUNC |
 			SECONDARY_EXEC_BUS_LOCK_DETECTION |
-			SECONDARY_EXEC_NOTIFY_VM_EXITING;
-		if (cpu_has_sgx())
-			opt2 |= SECONDARY_EXEC_ENCLS_EXITING;
+			SECONDARY_EXEC_NOTIFY_VM_EXITING |
+			SECONDARY_EXEC_ENCLS_EXITING;
+
 		if (adjust_vmx_controls(min2, opt2,
 					MSR_IA32_VMX_PROCBASED_CTLS2,
 					&_cpu_based_2nd_exec_control) < 0)
@@ -2577,6 +2577,9 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 		vmx_cap->vpid = 0;
 	}
 
+	if (!cpu_has_sgx())
+		_cpu_based_2nd_exec_control &= ~SECONDARY_EXEC_ENCLS_EXITING;
+
 	if (_cpu_based_exec_control & CPU_BASED_ACTIVATE_TERTIARY_CONTROLS) {
 		u64 opt3 = TERTIARY_EXEC_IPI_VIRT;
 
-- 
2.35.3


  parent reply	other threads:[~2022-07-14  9:15 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-14  9:13 [PATCH v4 00/25] KVM: VMX: Support updated eVMCSv1 revision + use vmcs_config for L1 VMX MSRs Vitaly Kuznetsov
2022-07-14  9:13 ` [PATCH v4 01/25] KVM: x86: hyper-v: Expose access to debug MSRs in the partition privilege flags Vitaly Kuznetsov
2022-07-21 21:43   ` Sean Christopherson
2022-07-22 17:22     ` Paolo Bonzini
2022-08-01  8:16       ` Vitaly Kuznetsov
2022-07-14  9:13 ` [PATCH v4 02/25] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-07-14  9:13 ` [PATCH v4 03/25] x86/hyperv: Update " Vitaly Kuznetsov
2022-07-14  9:57   ` Maxim Levitsky
2022-07-14  9:13 ` [PATCH v4 04/25] KVM: VMX: Define VMCS-to-EVMCS conversion for the new fields Vitaly Kuznetsov
2022-07-14  9:13 ` [PATCH v4 05/25] KVM: nVMX: Support several new fields in eVMCSv1 Vitaly Kuznetsov
2022-07-14  9:13 ` [PATCH v4 06/25] KVM: x86: hyper-v: Cache HYPERV_CPUID_NESTED_FEATURES CPUID leaf Vitaly Kuznetsov
2022-07-14  9:59   ` Maxim Levitsky
2022-07-14  9:13 ` [PATCH v4 07/25] KVM: selftests: Add ENCLS_EXITING_BITMAP{,HIGH} VMCS fields Vitaly Kuznetsov
2022-07-14  9:20   ` Kai Huang
2022-07-14  9:13 ` [PATCH v4 08/25] KVM: selftests: Switch to updated eVMCSv1 definition Vitaly Kuznetsov
2022-07-14 10:07   ` Maxim Levitsky
2022-07-14  9:13 ` [PATCH v4 09/25] KVM: VMX: nVMX: Support TSC scaling and PERF_GLOBAL_CTRL with enlightened VMCS Vitaly Kuznetsov
2022-07-21 21:58   ` Sean Christopherson
2022-07-25 17:09     ` Paolo Bonzini
2022-07-25 18:18       ` Sean Christopherson
2022-07-28 21:52         ` Paolo Bonzini
2022-07-28 22:13           ` Sean Christopherson
2022-07-28 22:24             ` Paolo Bonzini
2022-07-28 22:35               ` Sean Christopherson
2022-08-01  8:54               ` Vitaly Kuznetsov
2022-08-02 13:03               ` Vitaly Kuznetsov
2022-07-14  9:13 ` [PATCH v4 10/25] KVM: selftests: Enable TSC scaling in evmcs selftest Vitaly Kuznetsov
2022-07-14  9:13 ` [PATCH v4 11/25] KVM: VMX: Get rid of eVMCS specific VMX controls sanitization Vitaly Kuznetsov
2022-07-14 10:04   ` Maxim Levitsky
2022-07-14  9:13 ` [PATCH v4 12/25] KVM: VMX: Check VM_ENTRY_IA32E_MODE in setup_vmcs_config() Vitaly Kuznetsov
2022-07-21 22:00   ` Sean Christopherson
2022-07-14  9:13 ` [PATCH v4 13/25] KVM: VMX: Check CPU_BASED_{INTR,NMI}_WINDOW_EXITING " Vitaly Kuznetsov
2022-07-21 22:01   ` Sean Christopherson
2022-07-14  9:13 ` Vitaly Kuznetsov [this message]
2022-07-21 22:11   ` [PATCH v4 14/25] KVM: VMX: Tweak the special handling of SECONDARY_EXEC_ENCLS_EXITING " Sean Christopherson
2022-08-02 12:52     ` Vitaly Kuznetsov
2022-07-14  9:13 ` [PATCH v4 15/25] KVM: VMX: Extend VMX controls macro shenanigans Vitaly Kuznetsov
2022-07-21 22:28   ` Sean Christopherson
2022-07-22 18:33   ` Sean Christopherson
2022-07-22 21:04     ` Nathan Chancellor
2022-07-22 21:38       ` Sean Christopherson
2022-07-23  1:06         ` Nathan Chancellor
2022-07-28 16:27     ` Paolo Bonzini
2022-07-14  9:13 ` [PATCH v4 16/25] KVM: VMX: Move CPU_BASED_CR8_{LOAD,STORE}_EXITING filtering out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-21 22:30   ` Sean Christopherson
2022-07-14  9:13 ` [PATCH v4 17/25] KVM: VMX: Add missing VMEXIT controls to vmcs_config Vitaly Kuznetsov
2022-07-21 22:34   ` Sean Christopherson
2022-07-14  9:13 ` [PATCH v4 18/25] KVM: VMX: Add missing CPU based VM execution " Vitaly Kuznetsov
2022-07-21 22:39   ` Sean Christopherson
2022-07-14  9:13 ` [PATCH v4 19/25] KVM: VMX: Adjust CR3/INVPLG interception for EPT=y at runtime, not setup Vitaly Kuznetsov
2022-07-14  9:13 ` [PATCH v4 20/25] KVM: x86: VMX: Replace some Intel model numbers with mnemonics Vitaly Kuznetsov
2022-07-14  9:13 ` [PATCH v4 21/25] KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-21 22:56   ` Sean Christopherson
2022-07-28 22:25     ` Paolo Bonzini
2022-07-28 22:34       ` Sean Christopherson
2022-07-14  9:13 ` [PATCH v4 22/25] KVM: nVMX: Always set required-1 bits of pinbased_ctls to PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR Vitaly Kuznetsov
2022-07-14  9:13 ` [PATCH v4 23/25] KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-07-14  9:13 ` [PATCH v4 24/25] KVM: VMX: Cache MSR_IA32_VMX_MISC in vmcs_config Vitaly Kuznetsov
2022-07-21 23:06   ` Sean Christopherson
2022-08-02 16:11     ` Vitaly Kuznetsov
2022-08-02 16:28       ` Sean Christopherson
2022-07-14  9:13 ` [PATCH v4 25/25] KVM: nVMX: Use cached host MSR_IA32_VMX_MISC value for setting up nested MSR Vitaly Kuznetsov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220714091327.1085353-15-vkuznets@redhat.com \
    --to=vkuznets@redhat.com \
    --cc=anrayabh@linux.microsoft.com \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.