[PATCH 1/5] thermal/core: Rearm the monitoring only one time

From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: daniel.lezcano@linaro.org, rafael@kernel.org
Cc: rui.zhang@intel.com, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org, Amit Kucheria <amitk@kernel.org>
Subject: [PATCH 1/5] thermal/core: Rearm the monitoring only one time
Date: Fri,  5 Aug 2022 17:38:30 +0200	[thread overview]
Message-ID: <20220805153834.2510142-1-daniel.lezcano@linaro.org> (raw)

The current code calls monitor_thermal_zone() inside the
handle_thermal_trip() function. But this one is called in a loop for
each trip point which means the monitoring is rearmed several times
for nothing (assuming there could be several passive and active trip
points).

Move the monitor_thermal_zone() function out of the
handle_thermal_trip() function and after the thermal trip loop, so the
timer will be disabled or rearmed one time.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/thermal_core.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index b4c68410c158..4e1a83987b99 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -383,11 +383,6 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
 		handle_critical_trips(tz, trip, trip_temp, type);
 	else
 		handle_non_critical_trips(tz, trip);
-	/*
-	 * Alright, we handled this trip successfully.
-	 * So, start monitoring again.
-	 */
-	monitor_thermal_zone(tz);
 }
 
 static void update_temperature(struct thermal_zone_device *tz)
@@ -503,6 +498,8 @@ void thermal_zone_device_update(struct thermal_zone_device *tz,
 
 	for (count = 0; count < tz->num_trips; count++)
 		handle_thermal_trip(tz, count);
+
+	monitor_thermal_zone(tz);
 }
 EXPORT_SYMBOL_GPL(thermal_zone_device_update);
 
-- 
2.25.1

