All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Alejandro Jimenez <alejandro.j.jimenez@oracle.com>,
	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	Li RongQing <lirongqing@baidu.com>
Subject: [PATCH v4 19/32] KVM: x86: Explicitly track all possibilities for APIC map's logical modes
Date: Sat,  1 Oct 2022 00:59:02 +0000	[thread overview]
Message-ID: <20221001005915.2041642-20-seanjc@google.com> (raw)
In-Reply-To: <20221001005915.2041642-1-seanjc@google.com>

Track all possibilities for the optimized APIC map's logical modes
instead of overloading the pseudo-bitmap and treating any "unknown" value
as "invalid".

As documented by the now-stale comment above the mode values, the values
did have meaning when the optimized map was originally added.  That
dependent logical was removed by commit e45115b62f9a ("KVM: x86: use
physical LAPIC array for logical x2APIC"), but the obfuscated behavior
and its comment were left behind.

Opportunistically rename "mode" to "logical_mode", partly to make it
clear that the "disabled" case applies only to the logical map, but also
to prove that there is no lurking code that expects "mode" to be a bitmap.

Functionally, this is a glorified nop.

Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/include/asm/kvm_host.h | 21 +++++++++++---------
 arch/x86/kvm/lapic.c            | 35 +++++++++++++++++++++++++--------
 2 files changed, 39 insertions(+), 17 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 062758135c86..ac28bbfbf0e3 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -962,19 +962,22 @@ struct kvm_arch_memory_slot {
 };
 
 /*
- * We use as the mode the number of bits allocated in the LDR for the
- * logical processor ID.  It happens that these are all powers of two.
- * This makes it is very easy to detect cases where the APICs are
- * configured for multiple modes; in that case, we cannot use the map and
- * hence cannot use kvm_irq_delivery_to_apic_fast either.
+ * Track the mode of the optimized logical map, as the rules for decoding the
+ * destination vary per mode.  Enabling the optimized logical map requires all
+ * software-enabled local APIs to be in the same mode, each addressable APIC to
+ * be mapped to only one MDA, and each MDA to map to at most one APIC.
  */
-#define KVM_APIC_MODE_XAPIC_CLUSTER          4
-#define KVM_APIC_MODE_XAPIC_FLAT             8
-#define KVM_APIC_MODE_X2APIC                16
+enum kvm_apic_logical_mode {
+	KVM_APIC_MODE_SW_DISABLED,
+	KVM_APIC_MODE_XAPIC_CLUSTER,
+	KVM_APIC_MODE_XAPIC_FLAT,
+	KVM_APIC_MODE_X2APIC,
+	KVM_APIC_MODE_MAP_DISABLED,
+};
 
 struct kvm_apic_map {
 	struct rcu_head rcu;
-	u8 mode;
+	enum kvm_apic_logical_mode logical_mode;
 	u32 max_apic_id;
 	union {
 		struct kvm_lapic *xapic_flat_map[8];
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index cef8b202490b..9989893fef69 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -168,7 +168,12 @@ static bool kvm_use_posted_timer_interrupt(struct kvm_vcpu *vcpu)
 
 static inline bool kvm_apic_map_get_logical_dest(struct kvm_apic_map *map,
 		u32 dest_id, struct kvm_lapic ***cluster, u16 *mask) {
-	switch (map->mode) {
+	switch (map->logical_mode) {
+	case KVM_APIC_MODE_SW_DISABLED:
+		/* Arbitrarily use the flat map so that @cluster isn't NULL. */
+		*cluster = map->xapic_flat_map;
+		*mask = 0;
+		return true;
 	case KVM_APIC_MODE_X2APIC: {
 		u32 offset = (dest_id >> 16) * 16;
 		u32 max_apic_id = map->max_apic_id;
@@ -193,8 +198,10 @@ static inline bool kvm_apic_map_get_logical_dest(struct kvm_apic_map *map,
 		*cluster = map->xapic_cluster_map[(dest_id >> 4) & 0xf];
 		*mask = dest_id & 0xf;
 		return true;
+	case KVM_APIC_MODE_MAP_DISABLED:
+		return false;
 	default:
-		/* Not optimized. */
+		WARN_ON_ONCE(1);
 		return false;
 	}
 }
@@ -256,10 +263,12 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
 		goto out;
 
 	new->max_apic_id = max_id;
+	new->logical_mode = KVM_APIC_MODE_SW_DISABLED;
 
 	kvm_for_each_vcpu(i, vcpu, kvm) {
 		struct kvm_lapic *apic = vcpu->arch.apic;
 		struct kvm_lapic **cluster;
+		enum kvm_apic_logical_mode logical_mode;
 		u16 mask;
 		u32 ldr;
 		u8 xapic_id;
@@ -282,7 +291,8 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
 		if (!apic_x2apic_mode(apic) && !new->phys_map[xapic_id])
 			new->phys_map[xapic_id] = apic;
 
-		if (!kvm_apic_sw_enabled(apic))
+		if (new->logical_mode == KVM_APIC_MODE_MAP_DISABLED ||
+		    !kvm_apic_sw_enabled(apic))
 			continue;
 
 		ldr = kvm_lapic_get_reg(apic, APIC_LDR);
@@ -290,17 +300,26 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
 			continue;
 
 		if (apic_x2apic_mode(apic)) {
-			new->mode |= KVM_APIC_MODE_X2APIC;
+			logical_mode = KVM_APIC_MODE_X2APIC;
 		} else {
 			ldr = GET_APIC_LOGICAL_ID(ldr);
 			if (kvm_lapic_get_reg(apic, APIC_DFR) == APIC_DFR_FLAT)
-				new->mode |= KVM_APIC_MODE_XAPIC_FLAT;
+				logical_mode = KVM_APIC_MODE_XAPIC_FLAT;
 			else
-				new->mode |= KVM_APIC_MODE_XAPIC_CLUSTER;
+				logical_mode = KVM_APIC_MODE_XAPIC_CLUSTER;
 		}
+		if (new->logical_mode != KVM_APIC_MODE_SW_DISABLED &&
+		    new->logical_mode != logical_mode) {
+			new->logical_mode = KVM_APIC_MODE_MAP_DISABLED;
+			continue;
+		}
+		new->logical_mode = logical_mode;
 
-		if (!kvm_apic_map_get_logical_dest(new, ldr, &cluster, &mask))
+		if (WARN_ON_ONCE(!kvm_apic_map_get_logical_dest(new, ldr,
+								&cluster, &mask))) {
+			new->logical_mode = KVM_APIC_MODE_MAP_DISABLED;
 			continue;
+		}
 
 		if (mask)
 			cluster[ffs(mask) - 1] = apic;
@@ -953,7 +972,7 @@ static bool kvm_apic_is_broadcast_dest(struct kvm *kvm, struct kvm_lapic **src,
 {
 	if (kvm->arch.x2apic_broadcast_quirk_disabled) {
 		if ((irq->dest_id == APIC_BROADCAST &&
-				map->mode != KVM_APIC_MODE_X2APIC))
+		     map->logical_mode != KVM_APIC_MODE_X2APIC))
 			return true;
 		if (irq->dest_id == X2APIC_BROADCAST)
 			return true;
-- 
2.38.0.rc1.362.ged0d419d3c-goog


  parent reply	other threads:[~2022-10-01  1:02 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-01  0:58 [PATCH v4 00/32] KVM: x86: AVIC and local APIC fixes+cleanups Sean Christopherson
2022-10-01  0:58 ` [PATCH v4 01/32] KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps Sean Christopherson
2022-12-08 21:47   ` Maxim Levitsky
2022-10-01  0:58 ` [PATCH v4 02/32] KVM: x86: Purge "highest ISR" cache when updating APICv state Sean Christopherson
2022-12-08 21:47   ` Maxim Levitsky
2022-10-01  0:58 ` [PATCH v4 03/32] KVM: SVM: Flush the "current" TLB when activating AVIC Sean Christopherson
     [not found]   ` <b9f336f17eec6bfbb8429700e0f135d19813c576.camel@redhat.com>
2022-12-08 21:52     ` Maxim Levitsky
2022-12-09  0:40       ` Sean Christopherson
2022-12-08 22:02     ` Maxim Levitsky
2022-10-01  0:58 ` [PATCH v4 04/32] KVM: SVM: Process ICR on AVIC IPI delivery failure due to invalid target Sean Christopherson
2022-10-01  0:58 ` [PATCH v4 05/32] KVM: x86: Don't inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled Sean Christopherson
2022-12-08 21:53   ` Maxim Levitsky
2022-10-01  0:58 ` [PATCH v4 06/32] KVM: x86: Track xAPIC ID only on userspace SET, _after_ vAPIC is updated Sean Christopherson
2022-12-08 21:53   ` Maxim Levitsky
2022-10-01  0:58 ` [PATCH v4 07/32] KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID Sean Christopherson
2022-12-08 21:53   ` Maxim Levitsky
2022-10-01  0:58 ` [PATCH v4 08/32] KVM: SVM: Don't put/load AVIC when setting virtual APIC mode Sean Christopherson
2022-12-08 21:53   ` Maxim Levitsky
2022-10-01  0:58 ` [PATCH v4 09/32] KVM: x86: Handle APICv updates for APIC "mode" changes via request Sean Christopherson
2022-12-08 21:54   ` Maxim Levitsky
2022-10-01  0:58 ` [PATCH v4 10/32] KVM: x86: Move APIC access page helper to common x86 code Sean Christopherson
2022-12-08 21:55   ` Maxim Levitsky
2022-10-01  0:58 ` [PATCH v4 11/32] KVM: x86: Inhibit APIC memslot if x2APIC and AVIC are enabled Sean Christopherson
2022-12-08 21:56   ` Maxim Levitsky
2022-12-16 19:03     ` Sean Christopherson
2022-12-16 19:40       ` Sean Christopherson
2022-12-27 11:25         ` Paolo Bonzini
2023-01-03 16:30           ` Sean Christopherson
2022-10-01  0:58 ` [PATCH v4 12/32] KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" boolean Sean Christopherson
2022-10-01  0:58 ` [PATCH v4 13/32] KVM: SVM: Compute dest based on sender's x2APIC status for AVIC kick Sean Christopherson
2022-10-01  0:58 ` [PATCH v4 14/32] KVM: SVM: Fix x2APIC Logical ID calculation for avic_kick_target_vcpus_fast Sean Christopherson
2022-10-01  0:58 ` [PATCH v4 15/32] Revert "KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible" Sean Christopherson
2022-12-08 21:56   ` Maxim Levitsky
2022-10-01  0:58 ` [PATCH v4 16/32] KVM: SVM: Document that vCPU ID == APIC ID in AVIC kick fastpatch Sean Christopherson
2022-10-01  0:59 ` [PATCH v4 17/32] KVM: SVM: Add helper to perform final AVIC "kick" of single vCPU Sean Christopherson
2022-10-01  0:59 ` [PATCH v4 18/32] KVM: x86: Explicitly skip optimized logical map setup if vCPU's LDR==0 Sean Christopherson
2022-12-08 21:56   ` Maxim Levitsky
2022-10-01  0:59 ` Sean Christopherson [this message]
2022-12-08 21:57   ` [PATCH v4 19/32] KVM: x86: Explicitly track all possibilities for APIC map's logical modes Maxim Levitsky
2022-12-16 18:39     ` Sean Christopherson
2022-12-16 23:34       ` Sean Christopherson
2022-12-27 11:30         ` Paolo Bonzini
2022-10-01  0:59 ` [PATCH v4 20/32] KVM: x86: Skip redundant x2APIC logical mode optimized cluster setup Sean Christopherson
2022-12-08 21:57   ` Maxim Levitsky
2022-10-01  0:59 ` [PATCH v4 21/32] KVM: x86: Disable APIC logical map if logical ID covers multiple MDAs Sean Christopherson
2022-10-01  0:59 ` [PATCH v4 22/32] KVM: x86: Disable APIC logical map if vCPUs are aliased in logical mode Sean Christopherson
2022-10-01  0:59 ` [PATCH v4 23/32] KVM: x86: Honor architectural behavior for aliased 8-bit APIC IDs Sean Christopherson
2022-12-08 21:58   ` Maxim Levitsky
2022-10-01  0:59 ` [PATCH v4 24/32] KVM: x86: Inhibit APICv/AVIC if the optimized physical map is disabled Sean Christopherson
2022-12-08 21:58   ` Maxim Levitsky
2022-12-09  0:56     ` Sean Christopherson
2022-10-01  0:59 ` [PATCH v4 25/32] KVM: SVM: Inhibit AVIC if vCPUs are aliased in logical mode Sean Christopherson
2022-12-08 21:58   ` Maxim Levitsky
2022-10-01  0:59 ` [PATCH v4 26/32] KVM: SVM: Always update local APIC on writes to logical dest register Sean Christopherson
2022-12-08 21:58   ` Maxim Levitsky
2022-10-01  0:59 ` [PATCH v4 27/32] KVM: SVM: Update svm->ldr_reg cache even if LDR is "bad" Sean Christopherson
2022-12-08 21:59   ` Maxim Levitsky
2022-12-09  0:49     ` Sean Christopherson
2022-10-01  0:59 ` [PATCH v4 28/32] KVM: SVM: Require logical ID to be power-of-2 for AVIC entry Sean Christopherson
2022-12-08 22:00   ` Maxim Levitsky
2022-12-29  8:27     ` mlevitsk
2023-01-04 10:08       ` Maxim Levitsky
2023-01-04 18:02       ` Sean Christopherson
2023-01-04 18:34         ` Maxim Levitsky
2022-10-01  0:59 ` [PATCH v4 29/32] KVM: SVM: Handle multiple logical targets in AVIC kick fastpath Sean Christopherson
2022-12-08 22:00   ` Maxim Levitsky
2022-10-01  0:59 ` [PATCH v4 30/32] KVM: SVM: Ignore writes to Remote Read Data on AVIC write traps Sean Christopherson
2022-10-01  0:59 ` [PATCH v4 31/32] Revert "KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu" Sean Christopherson
2022-12-08 22:01   ` Maxim Levitsky
2022-10-01  0:59 ` [PATCH v4 32/32] KVM: x86: Track required APICv inhibits with variable, not callback Sean Christopherson
2022-12-08 22:03   ` Maxim Levitsky
2022-12-27 11:22 ` [PATCH v4 00/32] KVM: x86: AVIC and local APIC fixes+cleanups Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221001005915.2041642-20-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=alejandro.j.jimenez@oracle.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lirongqing@baidu.com \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=suravee.suthikulpanit@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.