From: Quentin Schulz <foss+uboot@0leil.net>
To: Heiko Stuebner <heiko@sntech.de>, Simon Glass <sjg@chromium.org>,
Philipp Tomsich <philipp.tomsich@vrull.eu>,
Klaus Goger <klaus.goger@theobroma-systems.com>
Cc: Quentin Schulz <quentin.schulz@theobroma-systems.com>,
Quentin Schulz <foss+uboot@0leil.net>,
u-boot@lists.denx.de, Kever Yang <kever.yang@rock-chips.com>
Subject: [PATCH v3 4/5] arm64: dts: rockchip: sync px30 DTSI with Linux kernel next-20221114
Date: Tue, 15 Nov 2022 18:53:17 +0100 [thread overview]
Message-ID: <20221017-upstream-ringneck-v3-4-d6ae387f35ef@theobroma-systems.com> (raw)
In-Reply-To: <20221017-upstream-ringneck-v3-0-d6ae387f35ef@theobroma-systems.com>
From: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Sync the px30 dtsi from Linux kernel next-20221114.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
---
arch/arm/dts/px30.dtsi | 28 +++++++++++++++++++++++++---
1 file changed, 25 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi
index 00f50b05d5..bfa3580429 100644
--- a/arch/arm/dts/px30.dtsi
+++ b/arch/arm/dts/px30.dtsi
@@ -365,6 +365,28 @@
status = "disabled";
};
+ i2s0_8ch: i2s@ff060000 {
+ compatible = "rockchip,px30-i2s-tdm";
+ reg = <0x0 0xff060000 0x0 0x1000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S0_TX>, <&cru SCLK_I2S0_RX>, <&cru HCLK_I2S0>;
+ clock-names = "mclk_tx", "mclk_rx", "hclk";
+ dmas = <&dmac 16>, <&dmac 17>;
+ dma-names = "tx", "rx";
+ rockchip,grf = <&grf>;
+ resets = <&cru SRST_I2S0_TX>, <&cru SRST_I2S0_RX>;
+ reset-names = "tx-m", "rx-m";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_sclkrx
+ &i2s0_8ch_lrcktx &i2s0_8ch_lrckrx
+ &i2s0_8ch_sdo0 &i2s0_8ch_sdi0
+ &i2s0_8ch_sdo1 &i2s0_8ch_sdi1
+ &i2s0_8ch_sdo2 &i2s0_8ch_sdi2
+ &i2s0_8ch_sdo3 &i2s0_8ch_sdi3>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
i2s1_2ch: i2s@ff070000 {
compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
reg = <0x0 0xff070000 0x0 0x1000>;
@@ -528,7 +550,7 @@
i2c0: i2c@ff180000 {
compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xff180000 0x0 0x1000>;
- clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+ clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
@@ -711,7 +733,7 @@
clock-names = "pclk", "timer";
};
- dmac: dmac@ff240000 {
+ dmac: dma-controller@ff240000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xff240000 0x0 0x4000>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -1072,7 +1094,7 @@
};
dsi: dsi@ff450000 {
- compatible = "rockchip,px30-mipi-dsi";
+ compatible = "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi";
reg = <0x0 0xff450000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_MIPI_DSI>;
--
b4 0.11.0-dev-7d2db
next prev parent reply other threads:[~2022-11-15 17:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-15 17:53 [PATCH v3 0/5] add support for Theobroma Systems PX30-µQ7 (Ringneck) with Haikou devkit Quentin Schulz
2022-11-15 17:53 ` [PATCH v3 1/5] rockchip: px30: fix CONFIG_IRAM_BASE Quentin Schulz
2022-11-15 17:53 ` [PATCH v3 2/5] rockchip: px30: list possible SPL boot devices Quentin Schulz
2022-11-15 17:53 ` [PATCH v3 3/5] rockchip: px30: insert u-boot, spl-boot-device into U-Boot device tree Quentin Schulz
2022-11-15 17:53 ` Quentin Schulz [this message]
2022-11-15 17:53 ` [PATCH v3 5/5] rockchip: add support for PX30 Ringneck SoM on Haikou Devkit Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221017-upstream-ringneck-v3-4-d6ae387f35ef@theobroma-systems.com \
--to=foss+uboot@0leil.net \
--cc=heiko@sntech.de \
--cc=kever.yang@rock-chips.com \
--cc=klaus.goger@theobroma-systems.com \
--cc=philipp.tomsich@vrull.eu \
--cc=quentin.schulz@theobroma-systems.com \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.