Re: [PATCH v2 6/7] ARM: dts: r9a06g032: Add the USBF controller node

From: Herve Codina <herve.codina@bootlin.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Magnus Damm <magnus.damm@gmail.com>,
	Gareth Williams <gareth.williams.jx@renesas.com>,
	linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>
Subject: Re: [PATCH v2 6/7] ARM: dts: r9a06g032: Add the USBF controller node
Date: Tue, 15 Nov 2022 16:09:17 +0100	[thread overview]
Message-ID: <20221115160917.73e7b4ef@bootlin.com> (raw)
In-Reply-To: <20221115142754.6253881b@bootlin.com>

Hi Krzysztof

On Tue, 15 Nov 2022 14:27:54 +0100
Herve Codina <herve.codina@bootlin.com> wrote:

> Hi Krzysztof,
> 
> On Tue, 15 Nov 2022 14:16:27 +0100
> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> 
> > On 14/11/2022 12:15, Herve Codina wrote:  
> > > Add the USBF controller available in the r9a06g032 SoC.
> > > 
> > > Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> > > ---
> > >  arch/arm/boot/dts/r9a06g032.dtsi | 12 ++++++++++++
> > >  1 file changed, 12 insertions(+)
> > > 
> > > diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
> > > index 563024c9a4ae..a4bb069457a3 100644
> > > --- a/arch/arm/boot/dts/r9a06g032.dtsi
> > > +++ b/arch/arm/boot/dts/r9a06g032.dtsi
> > > @@ -117,6 +117,18 @@ dmamux: dma-router@a0 {
> > >  			};
> > >  		};
> > >  
> > > +		udc: usb@4001e000 {
> > > +			compatible = "renesas,r9a06g032-usbf", "renesas,rzn1-usbf";
> > > +			reg = <0x4001e000 0x2000>;
> > > +			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
> > > +				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
> > > +			clocks = <&sysctrl R9A06G032_HCLK_USBF>,
> > > +				 <&sysctrl R9A06G032_HCLK_USBPM>;
> > > +			clock-names = "hclkf", "hclkpm";
> > > +			power-domains = <&sysctrl>;
> > > +			status = "disabled";    
> > 
> > If you provided all resources (clocks, power domains etc), why disabling it?  
> 
> Because I forgot to remove the 'status' property ...
> 'status' will be simply removed in v3.
> Sorry for this mistake.
> 
> Thanks for the review,
> Hervé
> 

I said something completely wrong for this point.

status is set disabled because it is a .dtsi and can be
included by several dts to represent a board.
This node (USB device) can be wired on some board and not on
some others.
So, the node will be enabled in each dts board that has the USBF
device wired and used.

Hervé

-- 
Hervé Codina, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com