From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 4/5] dt-bindings: remoteproc: qcom,sm6350-pas: split into separate file
Date: Wed, 16 Nov 2022 16:54:15 +0100 [thread overview]
Message-ID: <20221116155416.164239-5-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20221116155416.164239-1-krzysztof.kozlowski@linaro.org>
Split SM6350 remote processor Peripheral Authentication Service bindings
into their own file to reduce complexity and make maintenance easier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/remoteproc/qcom,adsp.yaml | 28 ---
.../bindings/remoteproc/qcom,sm6350-pas.yaml | 169 ++++++++++++++++++
2 files changed, 169 insertions(+), 28 deletions(-)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 875783b6b585..1460fbd5adab 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -37,9 +37,6 @@ properties:
- qcom,sdm845-adsp-pas
- qcom,sdm845-cdsp-pas
- qcom,sdx55-mpss-pas
- - qcom,sm6350-adsp-pas
- - qcom,sm6350-cdsp-pas
- - qcom,sm6350-mpss-pas
reg:
maxItems: 1
@@ -78,9 +75,6 @@ allOf:
- qcom,sc8280xp-nsp1-pas
- qcom,sdm845-adsp-pas
- qcom,sdm845-cdsp-pas
- - qcom,sm6350-adsp-pas
- - qcom,sm6350-cdsp-pas
- - qcom,sm6350-mpss-pas
then:
properties:
clocks:
@@ -182,8 +176,6 @@ allOf:
- qcom,sc8280xp-nsp1-pas
- qcom,sdm845-adsp-pas
- qcom,sdm845-cdsp-pas
- - qcom,sm6350-adsp-pas
- - qcom,sm6350-cdsp-pas
then:
properties:
interrupts:
@@ -200,7 +192,6 @@ allOf:
- qcom,sc7280-mpss-pas
- qcom,sc8180x-mpss-pas
- qcom,sdx55-mpss-pas
- - qcom,sm6350-mpss-pas
then:
properties:
interrupts:
@@ -272,23 +263,6 @@ allOf:
- const: mx
- const: mss
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sm6350-cdsp-pas
- then:
- properties:
- power-domains:
- items:
- - description: CX power domain
- - description: MX power domain
- power-domain-names:
- items:
- - const: cx
- - const: mx
-
- if:
properties:
compatible:
@@ -296,7 +270,6 @@ allOf:
enum:
- qcom,sc7280-mpss-pas
- qcom,sdx55-mpss-pas
- - qcom,sm6350-mpss-pas
then:
properties:
power-domains:
@@ -316,7 +289,6 @@ allOf:
- qcom,sc8180x-adsp-pas
- qcom,sc8180x-cdsp-pas
- qcom,sc8280xp-adsp-pas
- - qcom,sm6350-adsp-pas
then:
properties:
power-domains:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
new file mode 100644
index 000000000000..092d90beb91d
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sm6350-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 Peripheral Authentication Service
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SM6350 SoC Peripheral Authentication Service loads and boots
+ firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sm6350-adsp-pas
+ - qcom,sm6350-cdsp-pas
+ - qcom,sm6350-mpss-pas
+
+ reg:
+ maxItems: 1
+
+ smd-edge: false
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm6350-adsp-pas
+ - qcom,sm6350-cdsp-pas
+ - qcom,sm6350-mpss-pas
+ then:
+ properties:
+ clocks:
+ items:
+ - description: XO clock
+ clock-names:
+ items:
+ - const: xo
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm6350-adsp-pas
+ - qcom,sm6350-cdsp-pas
+ then:
+ properties:
+ interrupts:
+ maxItems: 5
+ interrupt-names:
+ maxItems: 5
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm6350-mpss-pas
+ then:
+ properties:
+ interrupts:
+ minItems: 6
+ interrupt-names:
+ minItems: 6
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm6350-cdsp-pas
+ then:
+ properties:
+ power-domains:
+ items:
+ - description: CX power domain
+ - description: MX power domain
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mx
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm6350-mpss-pas
+ then:
+ properties:
+ power-domains:
+ items:
+ - description: CX power domain
+ - description: MSS power domain
+ power-domain-names:
+ items:
+ - const: cx
+ - const: mss
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm6350-adsp-pas
+ then:
+ properties:
+ power-domains:
+ items:
+ - description: LCX power domain
+ - description: LMX power domain
+ power-domain-names:
+ items:
+ - const: lcx
+ - const: lmx
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/mailbox/qcom-ipcc.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ remoteproc@3000000 {
+ compatible = "qcom,sm6350-adsp-pas";
+ reg = <0x03000000 0x100>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ memory-region = <&pil_adsp_mem>;
+
+ power-domains = <&rpmhpd SM6350_LCX>,
+ <&rpmhpd SM6350_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ qcom,qmp = <&aoss_qmp>;
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ /* ... */
+ };
+ };
--
2.34.1
next prev parent reply other threads:[~2022-11-16 15:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-16 15:54 [PATCH 0/5] dt-bindings: remoteproc: qcom: split and reorganize PAS/PIL Krzysztof Kozlowski
2022-11-16 15:54 ` [PATCH 1/5] dt-bindings: remoteproc: qcom,adsp: split common part Krzysztof Kozlowski
2022-11-16 15:54 ` [PATCH 2/5] dt-bindings: remoteproc: qcom,sm8350-pas: split into separate file Krzysztof Kozlowski
2022-11-16 15:54 ` [PATCH 3/5] dt-bindings: remoteproc: qcom,sm8150-pas: " Krzysztof Kozlowski
2022-11-16 15:54 ` Krzysztof Kozlowski [this message]
2022-11-16 15:54 ` [PATCH 5/5] dt-bindings: remoteproc: qcom,sc8280xp-pas: " Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221116155416.164239-5-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mani@kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.