From: tumic@gpxsee.org
To: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
"Lizhi Hou" <lizhi.hou@amd.com>,
"Martin Tůma" <martin.tuma@digiteqautomotive.com>
Subject: [PATCH v4 0/1] Digiteq Automotive MGB4 driver
Date: Wed, 23 Nov 2022 15:04:30 +0100 [thread overview]
Message-ID: <20221123140431.4730-1-tumic@gpxsee.org> (raw)
From: Martin Tůma <martin.tuma@digiteqautomotive.com>
Hi,
This patch adds a driver for the Digiteq Automotive MGB4 grabber card.
MGB4 is a modular frame grabber PCIe card for automotive video interfaces
(FPD-Link and GMSL for now). It is based on a Xilinx FPGA and uses their
XDMA IP core for DMA transfers. Additionally, Xilinx I2C and SPI IP cores
which already have drivers in linux are used in the design.
The driver is a quite standard v4l2 driver, with one exception - there are
a lot of sysfs options that may/must be set before opening the v4l2 device
to adapt the card on a specific signal (see mgb4.rst for details)
as the card must be able to work with various signal sources (or displays)
that can not be auto-detected.
I have run the driver through the v4l2-compliance test suite for both the
input and the output and the results look fine to me (I can provide the
output if required).
The patch requires the new XDMA v10 driver from Xilinx/AMD from the dmaengine
mailing list to compile/work:
https://www.spinics.net/lists/dmaengine/msg31864.html
Changes in v4:
* Redesigned the signal change handling logic. Now using the propper timings
API in the video input driver and a propper open() syscall check/logic in
the video output driver.
* Fixed all minor issues from v3 review.
* 'checkpatch.pl --strict' used for checking the code.
Changes in v3:
* Rebased the DMA transfers part to use the new XDMA driver from Xilinx/AMD
Changes in v2:
* Completely rewritten the original Xilinx's XDMA driver to meet kernel code
standards.
* Added all required "to" and "cc" mail addresses.
Martin Tůma (1):
Added Digiteq Automotive MGB4 driver
Documentation/admin-guide/media/mgb4.rst | 352 ++++++++
.../admin-guide/media/pci-cardlist.rst | 1 +
.../admin-guide/media/v4l-drivers.rst | 1 +
MAINTAINERS | 7 +
drivers/media/pci/Kconfig | 1 +
drivers/media/pci/Makefile | 1 +
drivers/media/pci/mgb4/Kconfig | 17 +
drivers/media/pci/mgb4/Makefile | 6 +
drivers/media/pci/mgb4/mgb4_cmt.c | 247 ++++++
drivers/media/pci/mgb4/mgb4_cmt.h | 16 +
drivers/media/pci/mgb4/mgb4_core.c | 642 ++++++++++++++
drivers/media/pci/mgb4/mgb4_core.h | 65 ++
drivers/media/pci/mgb4/mgb4_dma.c | 123 +++
drivers/media/pci/mgb4/mgb4_dma.h | 18 +
drivers/media/pci/mgb4/mgb4_i2c.c | 141 +++
drivers/media/pci/mgb4/mgb4_i2c.h | 35 +
drivers/media/pci/mgb4/mgb4_io.h | 39 +
drivers/media/pci/mgb4/mgb4_regs.c | 30 +
drivers/media/pci/mgb4/mgb4_regs.h | 35 +
drivers/media/pci/mgb4/mgb4_sysfs.h | 18 +
drivers/media/pci/mgb4/mgb4_sysfs_in.c | 780 ++++++++++++++++
drivers/media/pci/mgb4/mgb4_sysfs_out.c | 732 +++++++++++++++
drivers/media/pci/mgb4/mgb4_sysfs_pci.c | 86 ++
drivers/media/pci/mgb4/mgb4_trigger.c | 209 +++++
drivers/media/pci/mgb4/mgb4_trigger.h | 8 +
drivers/media/pci/mgb4/mgb4_vin.c | 830 ++++++++++++++++++
drivers/media/pci/mgb4/mgb4_vin.h | 63 ++
drivers/media/pci/mgb4/mgb4_vout.c | 501 +++++++++++
drivers/media/pci/mgb4/mgb4_vout.h | 58 ++
29 files changed, 5062 insertions(+)
create mode 100644 Documentation/admin-guide/media/mgb4.rst
create mode 100644 drivers/media/pci/mgb4/Kconfig
create mode 100644 drivers/media/pci/mgb4/Makefile
create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.c
create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.h
create mode 100644 drivers/media/pci/mgb4/mgb4_core.c
create mode 100644 drivers/media/pci/mgb4/mgb4_core.h
create mode 100644 drivers/media/pci/mgb4/mgb4_dma.c
create mode 100644 drivers/media/pci/mgb4/mgb4_dma.h
create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.c
create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.h
create mode 100644 drivers/media/pci/mgb4/mgb4_io.h
create mode 100644 drivers/media/pci/mgb4/mgb4_regs.c
create mode 100644 drivers/media/pci/mgb4/mgb4_regs.h
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs.h
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_in.c
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_out.c
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_pci.c
create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.c
create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.h
create mode 100644 drivers/media/pci/mgb4/mgb4_vin.c
create mode 100644 drivers/media/pci/mgb4/mgb4_vin.h
create mode 100644 drivers/media/pci/mgb4/mgb4_vout.c
create mode 100644 drivers/media/pci/mgb4/mgb4_vout.h
--
2.38.1
next reply other threads:[~2022-11-23 12:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-23 14:04 tumic [this message]
2022-11-23 14:04 ` [PATCH v4 1/1] Added Digiteq Automotive MGB4 driver tumic
2022-11-25 2:07 ` kernel test robot
2022-12-18 18:58 ` [PATCH v4 0/1] " Pavel Machek
2022-12-19 11:10 ` Martin Tůma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221123140431.4730-1-tumic@gpxsee.org \
--to=tumic@gpxsee.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lizhi.hou@amd.com \
--cc=martin.tuma@digiteqautomotive.com \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.