From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Taniya Das <quic_tdas@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org
Subject: [PATCH v3 3/4] clk: qcom: rpm: drop the _clk suffix completely
Date: Fri, 2 Dec 2022 09:08:13 +0200 [thread overview]
Message-ID: <20221202070814.482470-4-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20221202070814.482470-1-dmitry.baryshkov@linaro.org>
Drop the _clk suffix from other clocks too. This does not produce any
user-visible changes, just syntax sugar.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/clk/qcom/clk-rpm.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/qcom/clk-rpm.c b/drivers/clk/qcom/clk-rpm.c
index ca96f4bf7b2d..74a94e858920 100644
--- a/drivers/clk/qcom/clk-rpm.c
+++ b/drivers/clk/qcom/clk-rpm.c
@@ -58,24 +58,24 @@ static const struct clk_parent_data gcc_cxo[] = {
}
#define DEFINE_CLK_RPM_XO_BUFFER(_platform, _name, offset) \
- static struct clk_rpm _platform##_##_name = { \
+ static struct clk_rpm _platform##_##_name##_clk = { \
.rpm_clk_id = QCOM_RPM_CXO_BUFFERS, \
.xo_offset = (offset), \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_rpm_xo_ops, \
- .name = #_name, \
+ .name = #_name "_clk", \
.parent_data = gcc_cxo, \
.num_parents = ARRAY_SIZE(gcc_cxo), \
}, \
}
#define DEFINE_CLK_RPM_FIXED(_platform, _name, r_id, r) \
- static struct clk_rpm _platform##_##_name = { \
+ static struct clk_rpm _platform##_##_name##_clk = { \
.rpm_clk_id = (r_id), \
.rate = (r), \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_rpm_fixed_ops, \
- .name = #_name, \
+ .name = #_name "_clk", \
.parent_data = gcc_pxo, \
.num_parents = ARRAY_SIZE(gcc_pxo), \
}, \
@@ -412,7 +412,7 @@ DEFINE_CLK_RPM(msm8660, cfpb, QCOM_RPM_CFPB_CLK);
DEFINE_CLK_RPM(msm8660, mmfpb, QCOM_RPM_MMFPB_CLK);
DEFINE_CLK_RPM(msm8660, smi, QCOM_RPM_SMI_CLK);
DEFINE_CLK_RPM(msm8660, ebi1, QCOM_RPM_EBI1_CLK);
-DEFINE_CLK_RPM_FIXED(msm8660, pll4_clk, QCOM_RPM_PLL_4, 540672000);
+DEFINE_CLK_RPM_FIXED(msm8660, pll4, QCOM_RPM_PLL_4, 540672000);
static struct clk_rpm *msm8660_clks[] = {
[RPM_APPS_FABRIC_CLK] = &msm8660_afab_clk,
@@ -451,11 +451,11 @@ DEFINE_CLK_RPM(apq8064, mmfpb, QCOM_RPM_MMFPB_CLK);
DEFINE_CLK_RPM(apq8064, sfab, QCOM_RPM_SYS_FABRIC_CLK);
DEFINE_CLK_RPM(apq8064, sfpb, QCOM_RPM_SFPB_CLK);
DEFINE_CLK_RPM(apq8064, qdss, QCOM_RPM_QDSS_CLK);
-DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_d0_clk, 0);
-DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_d1_clk, 8);
-DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_a0_clk, 16);
-DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_a1_clk, 24);
-DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_a2_clk, 28);
+DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_d0, 0);
+DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_d1, 8);
+DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_a0, 16);
+DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_a1, 24);
+DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_a2, 28);
static struct clk_rpm *apq8064_clks[] = {
[RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
--
2.35.1
next prev parent reply other threads:[~2022-12-02 7:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-02 7:08 [PATCH v3 0/4] clk: qcom: rpm: drop platform names Dmitry Baryshkov
2022-12-02 7:08 ` [PATCH v3 1/4] clk: qcom: rpm: remove unused active-only clock names Dmitry Baryshkov
2022-12-02 7:08 ` [PATCH v3 2/4] clk: qcom: rpm: drop separate active-only names Dmitry Baryshkov
2022-12-02 7:08 ` Dmitry Baryshkov [this message]
2022-12-02 7:08 ` [PATCH v3 4/4] clk: qcom: rpm: drop the platform from clock definitions Dmitry Baryshkov
2022-12-02 19:42 ` [PATCH v3 0/4] clk: qcom: rpm: drop platform names Bjorn Andersson
2022-12-02 20:58 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221202070814.482470-4-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=quic_tdas@quicinc.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.