From: Prabhakar <prabhakar.csengg@gmail.com>
To: Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v2 1/9] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
Date: Wed, 21 Dec 2022 00:02:34 +0000 [thread overview]
Message-ID: <20221221000242.340202-2-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <20221221000242.340202-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC
is almost identical to one found on the RZ/G2L SoC the only difference
being it can support BUS_ERR_INT for which it has additional registers.
Hence new generic compatible string "renesas,rzg2ul-irqc" is added for
RZ/G2UL SoC.
Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC
interrupt-names property is added so that we can parse them based on
names.
While at it updated the example node to four spaces and added
interrupt-names property.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1- > v2
* Dropped RB tags
* Added generic compatible string for rzg2ul
* Added interrupt-names
* Added checks for RZ/G2UL to make sure interrupts are 42 and interrupt-names
* Updated example node with interrupt-names
* Used 4 spaces for example node
---
.../renesas,rzg2l-irqc.yaml | 240 +++++++++++++-----
1 file changed, 180 insertions(+), 60 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
index 33b90e975e33..6a0cf57698ab 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -19,16 +19,19 @@ description: |
- NMI edge select (NMI is not treated as NMI exception and supports fall edge and
stand-up edge detection interrupts)
-allOf:
- - $ref: /schemas/interrupt-controller.yaml#
-
properties:
compatible:
- items:
- - enum:
- - renesas,r9a07g044-irqc # RZ/G2{L,LC}
- - renesas,r9a07g054-irqc # RZ/V2L
- - const: renesas,rzg2l-irqc
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r9a07g044-irqc # RZ/G2{L,LC}
+ - renesas,r9a07g054-irqc # RZ/V2L
+ - const: renesas,rzg2l-irqc
+
+ - items:
+ - enum:
+ - renesas,r9a07g043u-irqc # RZ/G2UL
+ - const: renesas,rzg2ul-irqc
'#interrupt-cells':
description: The first cell should contain external interrupt number (IRQ0-7) and the
@@ -44,7 +47,96 @@ properties:
maxItems: 1
interrupts:
- maxItems: 41
+ minItems: 41
+ items:
+ - description: NMI interrupt
+ - description: IRQ0 interrupt
+ - description: IRQ1 interrupt
+ - description: IRQ2 interrupt
+ - description: IRQ3 interrupt
+ - description: IRQ4 interrupt
+ - description: IRQ5 interrupt
+ - description: IRQ6 interrupt
+ - description: IRQ7 interrupt
+ - description: GPIO interrupt, TINT0
+ - description: GPIO interrupt, TINT1
+ - description: GPIO interrupt, TINT2
+ - description: GPIO interrupt, TINT3
+ - description: GPIO interrupt, TINT4
+ - description: GPIO interrupt, TINT5
+ - description: GPIO interrupt, TINT6
+ - description: GPIO interrupt, TINT7
+ - description: GPIO interrupt, TINT8
+ - description: GPIO interrupt, TINT9
+ - description: GPIO interrupt, TINT10
+ - description: GPIO interrupt, TINT11
+ - description: GPIO interrupt, TINT12
+ - description: GPIO interrupt, TINT13
+ - description: GPIO interrupt, TINT14
+ - description: GPIO interrupt, TINT15
+ - description: GPIO interrupt, TINT16
+ - description: GPIO interrupt, TINT17
+ - description: GPIO interrupt, TINT18
+ - description: GPIO interrupt, TINT19
+ - description: GPIO interrupt, TINT20
+ - description: GPIO interrupt, TINT21
+ - description: GPIO interrupt, TINT22
+ - description: GPIO interrupt, TINT23
+ - description: GPIO interrupt, TINT24
+ - description: GPIO interrupt, TINT25
+ - description: GPIO interrupt, TINT26
+ - description: GPIO interrupt, TINT27
+ - description: GPIO interrupt, TINT28
+ - description: GPIO interrupt, TINT29
+ - description: GPIO interrupt, TINT30
+ - description: GPIO interrupt, TINT31
+ - description: Bus error interrupt
+
+ interrupt-names:
+ minItems: 41
+ items:
+ - const: nmi
+ - const: irq0
+ - const: irq1
+ - const: irq2
+ - const: irq3
+ - const: irq4
+ - const: irq5
+ - const: irq6
+ - const: irq7
+ - const: tint0
+ - const: tint1
+ - const: tint2
+ - const: tint3
+ - const: tint4
+ - const: tint5
+ - const: tint6
+ - const: tint7
+ - const: tint8
+ - const: tint9
+ - const: tint10
+ - const: tint11
+ - const: tint12
+ - const: tint13
+ - const: tint14
+ - const: tint15
+ - const: tint16
+ - const: tint17
+ - const: tint18
+ - const: tint19
+ - const: tint20
+ - const: tint21
+ - const: tint22
+ - const: tint23
+ - const: tint24
+ - const: tint25
+ - const: tint26
+ - const: tint27
+ - const: tint28
+ - const: tint29
+ - const: tint30
+ - const: tint31
+ - const: bus-err
clocks:
maxItems: 2
@@ -72,6 +164,23 @@ required:
- power-domains
- resets
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,rzg2ul-irqc
+ then:
+ properties:
+ interrupts:
+ minItems: 42
+ interrupt-names:
+ minItems: 42
+ required:
+ - interrupt-names
+
unevaluatedProperties: false
examples:
@@ -80,55 +189,66 @@ examples:
#include <dt-bindings/clock/r9a07g044-cpg.h>
irqc: interrupt-controller@110a0000 {
- compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
- reg = <0x110a0000 0x10000>;
- #interrupt-cells = <2>;
- #address-cells = <0>;
- interrupt-controller;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
- <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
- clock-names = "clk", "pclk";
- power-domains = <&cpg>;
- resets = <&cpg R9A07G044_IA55_RESETN>;
+ compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
+ reg = <0x110a0000 0x10000>;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "nmi",
+ "irq0", "irq1", "irq2", "irq3",
+ "irq4", "irq5", "irq6", "irq7",
+ "tint0", "tint1", "tint2", "tint3",
+ "tint4", "tint5", "tint6", "tint7",
+ "tint8", "tint9", "tint10", "tint11",
+ "tint12", "tint13", "tint14", "tint15",
+ "tint16", "tint17", "tint18", "tint19",
+ "tint20", "tint21", "tint22", "tint23",
+ "tint24", "tint25", "tint26", "tint27",
+ "tint28", "tint29", "tint30", "tint31";
+ clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+ <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+ clock-names = "clk", "pclk";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_IA55_RESETN>;
};
--
2.25.1
next prev parent reply other threads:[~2022-12-21 0:03 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-21 0:02 [PATCH v2 0/9] Add IRQC support to RZ/G2UL SoC Prabhakar
2022-12-21 0:02 ` Prabhakar [this message]
2022-12-21 12:37 ` [PATCH v2 1/9] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document " Geert Uytterhoeven
2022-12-21 21:06 ` Lad, Prabhakar
2022-12-22 8:19 ` Geert Uytterhoeven
2022-12-22 11:53 ` Lad, Prabhakar
2022-12-21 0:02 ` [PATCH v2 2/9] dt-bindings: interrupt-controller: irqc-rzg2l: Drop RZG2L_NMI macro Prabhakar
2022-12-29 8:46 ` Krzysztof Kozlowski
2023-01-03 8:43 ` Geert Uytterhoeven
2023-01-03 10:33 ` Lad, Prabhakar
2022-12-21 0:02 ` [PATCH v2 3/9] irqchip: irq-renesas-rzg2l: Skip mapping NMI interrupt as part of hierarchy domain Prabhakar
2022-12-21 10:31 ` Marc Zyngier
2022-12-22 11:52 ` Lad, Prabhakar
2022-12-21 0:02 ` [PATCH v2 4/9] irqchip: irq-renesas-rzg2l: Add support for RZ/G2UL SoC Prabhakar
2022-12-21 10:20 ` Marc Zyngier
2022-12-21 12:18 ` Geert Uytterhoeven
2022-12-22 11:49 ` Lad, Prabhakar
2022-12-22 12:51 ` Geert Uytterhoeven
2022-12-21 0:02 ` [PATCH v2 5/9] pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts Prabhakar
2022-12-21 0:02 ` [PATCH v2 6/9] pinctrl: renesas: rzg2l: Add BUILD_BUG_ON() checks Prabhakar
2022-12-21 0:02 ` [PATCH v2 7/9] arm64: dts: renesas: r9a07g043u: Add IRQC node Prabhakar
2022-12-21 0:02 ` [PATCH v2 8/9] arm64: dts: renesas: r9a07g043[u]: Update pinctrl node to handle GPIO interrupts Prabhakar
2022-12-21 0:02 ` [PATCH v2 9/9] arm64: dts: renesas: rzg2ul-smarc-som: Add PHY interrupt support for ETH{0/1} Prabhakar
2022-12-27 13:02 ` Geert Uytterhoeven
2022-12-28 23:36 ` Lad, Prabhakar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221221000242.340202-2-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.csengg@gmail.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=maz@kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.