From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: "Lars-Peter Clausen" <lars@metafoo.de>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Lucas Stankus" <lucas.p.stankus@gmail.com>,
"Puranjay Mohan" <puranjay12@gmail.com>,
"Dmitry Rokosov" <ddrokosov@sberdevices.ru>,
"Alexandru Tachici" <alexandru.tachici@analog.com>,
"Marcelo Schmitt" <marcelo.schmitt1@gmail.com>,
"Renato Lui Geh" <renatogeh@gmail.com>,
"Eugen Hristev" <eugen.hristev@microchip.com>,
"Nicolas Ferre" <nicolas.ferre@microchip.com>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Claudiu Beznea" <claudiu.beznea@microchip.com>,
"Andreas Klinger" <ak@it-klinger.de>,
"Marcus Folkesson" <marcus.folkesson@gmail.com>,
"Kent Gustavsson" <kent@minoris.se>,
"Lad Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
"Alim Akhtar" <alim.akhtar@samsung.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
"Oleksij Rempel" <linux@rempel-privat.de>,
kernel@pengutronix.de, "Nuno Sá" <nuno.sa@analog.com>,
"Nishant Malpani" <nish.malpani25@gmail.com>,
"Rui Miguel Silva" <rmfrfs@gmail.com>,
"Dragos Bogdan" <dragos.bogdan@analog.com>,
"Jean-Baptiste Maneyrol" <jmaneyrol@invensense.com>,
"Lorenzo Bianconi" <lorenzo@kernel.org>,
"Benson Leung" <bleung@chromium.org>,
"Guenter Roeck" <groeck@chromium.org>,
"Stefan Popa" <stefan.popa@analog.com>,
"Robert Yang" <decatf@gmail.com>,
"Sean Nyekjaer" <sean@geanix.com>,
"Artur Rojek" <contact@artur-rojek.eu>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"Philippe Reynes" <tremyfr@yahoo.fr>,
"Alexandru Lazar" <alazar@startmail.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Caleb Connolly" <caleb.connolly@linaro.org>,
"Fabrice Gasnier" <fabrice.gasnier@foss.st.com>,
"Stefan Agner" <stefan@agner.ch>,
"Daniel Baluta" <daniel.baluta@nxp.com>,
"Harald Geyer" <harald@ccbib.org>,
"Eugene Zaikonnikov" <ez@norophonic.com>,
"Phil Reid" <preid@electromag.com.au>,
"Matt Ranostay" <matt.ranostay@konsulko.com>,
"Stephen Boyd" <swboyd@chromium.org>,
"Sankar Velliangiri" <navin@linumiz.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org,
linux-samsung-soc@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
chrome-platform@lists.linux.dev
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Rob Herring <robh@kernel.org>
Subject: [PATCH v2 4/5] dt-bindings: iio: use lowercase hex in examples
Date: Tue, 24 Jan 2023 09:10:36 +0100 [thread overview]
Message-ID: <20230124081037.31013-4-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20230124081037.31013-1-krzysztof.kozlowski@linaro.org>
Use lowercase hex in addresses in examples.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml | 2 +-
.../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml | 2 +-
Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml | 2 +-
.../devicetree/bindings/iio/potentiometer/adi,ad5272.yaml | 2 +-
.../devicetree/bindings/iio/temperature/adi,ltc2983.yaml | 6 +++---
5 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
index 714e48e613de..6ddb03f61bd9 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
@@ -44,7 +44,7 @@ examples:
accel@f {
compatible = "kionix,kxtf9";
- reg = <0x0F>;
+ reg = <0xf>;
mount-matrix = "0", "1", "0",
"1", "0", "0",
"0", "0", "1";
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index e27d094cfa05..dca6cfe1e88e 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -150,7 +150,7 @@ examples:
adc@126c0000 {
compatible = "samsung,exynos3250-adc";
- reg = <0x126C0000 0x100>;
+ reg = <0x126c0000 0x100>;
interrupts = <0 137 0>;
#io-channel-cells = <1>;
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
index 88298bc43b81..79da0323c327 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
@@ -46,7 +46,7 @@ examples:
dac@4c {
compatible = "ti,dac5571";
- reg = <0x4C>;
+ reg = <0x4c>;
vref-supply = <&vdd_supply>;
};
};
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
index 0ebb6725a1af..b8d7083c97f8 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
@@ -44,7 +44,7 @@ examples:
potentiometer@2f {
compatible = "adi,ad5272-020";
- reg = <0x2F>;
+ reg = <0x2f>;
reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
};
};
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index b69813f281da..3e5b7b47bcdc 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -519,9 +519,9 @@ examples:
reg = <12>;
adi,sensor-type = <26>; //Steinhart
adi,rsense-handle = <&rsense2>;
- adi,custom-steinhart = <0x00F371EC 0x12345678
- 0x2C0F8733 0x10018C66 0xA0FEACCD
- 0x90021D99>; //6 entries
+ adi,custom-steinhart = <0x00f371ec 0x12345678
+ 0x2c0f8733 0x10018c66 0xa0feaccd
+ 0x90021d99>; //6 entries
};
thermocouple@20 {
--
2.34.1
next prev parent reply other threads:[~2023-01-24 8:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-24 8:10 [PATCH v2 1/5] dt-bindings: iio: drop unneeded quotes Krzysztof Kozlowski
2023-01-24 8:10 ` [PATCH v2 2/5] dt-bindings: iio: minor whitespace cleanups Krzysztof Kozlowski
2023-01-24 8:10 ` [PATCH v2 3/5] dt-bindings: iio: correct node names in examples Krzysztof Kozlowski
2023-01-24 8:10 ` Krzysztof Kozlowski [this message]
2023-01-24 8:10 ` [PATCH v2 5/5] dt-bindings: iio: cleanup examples - indentation Krzysztof Kozlowski
2023-01-28 16:16 ` [PATCH v2 1/5] dt-bindings: iio: drop unneeded quotes Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230124081037.31013-4-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=Michael.Hennerich@analog.com \
--cc=ak@it-klinger.de \
--cc=alazar@startmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@foss.st.com \
--cc=alexandru.tachici@analog.com \
--cc=alim.akhtar@samsung.com \
--cc=bleung@chromium.org \
--cc=caleb.connolly@linaro.org \
--cc=chrome-platform@lists.linux.dev \
--cc=claudiu.beznea@microchip.com \
--cc=contact@artur-rojek.eu \
--cc=daniel.baluta@nxp.com \
--cc=ddrokosov@sberdevices.ru \
--cc=decatf@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dragos.bogdan@analog.com \
--cc=eugen.hristev@microchip.com \
--cc=ez@norophonic.com \
--cc=fabrice.gasnier@foss.st.com \
--cc=groeck@chromium.org \
--cc=harald@ccbib.org \
--cc=jic23@kernel.org \
--cc=jmaneyrol@invensense.com \
--cc=kent@minoris.se \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@rempel-privat.de \
--cc=lorenzo@kernel.org \
--cc=lucas.p.stankus@gmail.com \
--cc=marcelo.schmitt1@gmail.com \
--cc=marcus.folkesson@gmail.com \
--cc=matt.ranostay@konsulko.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=navin@linumiz.com \
--cc=nicolas.ferre@microchip.com \
--cc=nish.malpani25@gmail.com \
--cc=nuno.sa@analog.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=preid@electromag.com.au \
--cc=puranjay12@gmail.com \
--cc=renatogeh@gmail.com \
--cc=rmfrfs@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sean@geanix.com \
--cc=stefan.popa@analog.com \
--cc=stefan@agner.ch \
--cc=swboyd@chromium.org \
--cc=tremyfr@yahoo.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.