From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: linux-arm-msm@vger.kernel.org, andersson@kernel.org,
agross@kernel.org, krzysztof.kozlowski@linaro.org
Cc: marijn.suijten@somainline.org,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Subject: [PATCH v2 4/6] clk: qcom: Add GPU clock controller driver for SM6375
Date: Thu, 26 Jan 2023 19:13:33 +0100 [thread overview]
Message-ID: <20230126181335.12970-5-konrad.dybcio@linaro.org> (raw)
In-Reply-To: <20230126181335.12970-1-konrad.dybcio@linaro.org>
Add support for the GPU clock controller found on SM6375.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
- Add "depends on" (Krzysztof)
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gpucc-sm6375.c | 480 ++++++++++++++++++++++++++++++++
3 files changed, 490 insertions(+)
create mode 100644 drivers/clk/qcom/gpucc-sm6375.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 4ee1bf151ee2..a5995ede04e9 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -807,6 +807,15 @@ config SM_GPUCC_6125
Say Y if you want to support graphics controller devices and
functionality such as 3D graphics.
+config SM_GPUCC_6375
+ tristate "SM6375 Graphics Clock Controller"
+ select SM_GCC_6375
+ depends on ARM64 || COMPILE_TEST
+ help
+ Support for the graphics clock controller on SM6375 devices.
+ Say Y if you want to support graphics controller devices and
+ functionality such as 3D graphics.
+
config SM_GPUCC_6350
tristate "SM6350 Graphics Clock Controller"
select SM_GCC_6350
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 14405ccf1992..5a1b65b2ac05 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -114,6 +114,7 @@ obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o
obj-$(CONFIG_SM_GCC_8550) += gcc-sm8550.o
obj-$(CONFIG_SM_GPUCC_6125) += gpucc-sm6125.o
obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o
+obj-$(CONFIG_SM_GPUCC_6375) += gpucc-sm6375.o
obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o
diff --git a/drivers/clk/qcom/gpucc-sm6375.c b/drivers/clk/qcom/gpucc-sm6375.c
new file mode 100644
index 000000000000..9be3827acfae
--- /dev/null
+++ b/drivers/clk/qcom/gpucc-sm6375.c
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,sm6375-gpucc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "clk-regmap-phy-mux.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+ DT_BI_TCXO,
+ DT_GCC_GPU_GPLL0_CLK_SRC,
+ DT_GCC_GPU_GPLL0_DIV_CLK_SRC,
+ DT_GCC_GPU_SNOC_DVM_GFX_CLK,
+};
+
+enum {
+ P_BI_TCXO,
+ P_GCC_GPU_GPLL0_CLK_SRC,
+ P_GCC_GPU_GPLL0_DIV_CLK_SRC,
+ P_GPU_CC_PLL0_OUT_EVEN,
+ P_GPU_CC_PLL0_OUT_MAIN,
+ P_GPU_CC_PLL0_OUT_ODD,
+ P_GPU_CC_PLL1_OUT_EVEN,
+ P_GPU_CC_PLL1_OUT_MAIN,
+ P_GPU_CC_PLL1_OUT_ODD,
+};
+
+static struct pll_vco lucid_vco[] = {
+ { 249600000, 2000000000, 0 },
+};
+
+/* 532MHz Configuration */
+static const struct alpha_pll_config gpucc_pll0_config = {
+ .l = 0x1b,
+ .alpha = 0xb555,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00002261,
+ .config_ctl_hi1_val = 0x329a299c,
+ .user_ctl_val = 0x00000001,
+ .user_ctl_hi_val = 0x00000805,
+ .user_ctl_hi1_val = 0x00000000,
+};
+
+static struct clk_alpha_pll gpucc_pll0 = {
+ .offset = 0x0,
+ .vco_table = lucid_vco,
+ .num_vco = ARRAY_SIZE(lucid_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_pll0",
+ .parent_data = &(const struct clk_parent_data){
+ .index = P_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_ops,
+ },
+ },
+};
+
+/* 514MHz Configuration */
+static const struct alpha_pll_config gpucc_pll1_config = {
+ .l = 0x1a,
+ .alpha = 0xc555,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00002261,
+ .config_ctl_hi1_val = 0x329a299c,
+ .user_ctl_val = 0x00000001,
+ .user_ctl_hi_val = 0x00000805,
+ .user_ctl_hi1_val = 0x00000000,
+};
+
+static struct clk_alpha_pll gpucc_pll1 = {
+ .offset = 0x100,
+ .vco_table = lucid_vco,
+ .num_vco = ARRAY_SIZE(lucid_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_pll1",
+ .parent_data = &(const struct clk_parent_data){
+ .index = P_BI_TCXO,
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_lucid_ops,
+ },
+ },
+};
+
+static const struct parent_map gpucc_parent_map_0[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPU_CC_PLL0_OUT_MAIN, 1 },
+ { P_GPU_CC_PLL1_OUT_MAIN, 3 },
+ { P_GCC_GPU_GPLL0_CLK_SRC, 5 },
+ { P_GCC_GPU_GPLL0_DIV_CLK_SRC, 6 },
+};
+
+static const struct clk_parent_data gpucc_parent_data_0[] = {
+ { .index = P_BI_TCXO },
+ { .hw = &gpucc_pll0.clkr.hw },
+ { .hw = &gpucc_pll1.clkr.hw },
+ { .index = DT_GCC_GPU_GPLL0_CLK_SRC },
+ { .index = DT_GCC_GPU_GPLL0_DIV_CLK_SRC },
+};
+
+static const struct parent_map gpucc_parent_map_1[] = {
+ { P_BI_TCXO, 0 },
+ { P_GPU_CC_PLL0_OUT_EVEN, 1 },
+ { P_GPU_CC_PLL0_OUT_ODD, 2 },
+ { P_GPU_CC_PLL1_OUT_EVEN, 3 },
+ { P_GPU_CC_PLL1_OUT_ODD, 4 },
+ { P_GCC_GPU_GPLL0_CLK_SRC, 5 },
+};
+
+static const struct clk_parent_data gpucc_parent_data_1[] = {
+ { .index = P_BI_TCXO },
+ { .hw = &gpucc_pll0.clkr.hw },
+ { .hw = &gpucc_pll0.clkr.hw },
+ { .hw = &gpucc_pll1.clkr.hw },
+ { .hw = &gpucc_pll1.clkr.hw },
+ { .index = DT_GCC_GPU_GPLL0_CLK_SRC },
+};
+
+static const struct parent_map gpucc_parent_map_2[] = {
+ { P_BI_TCXO, 0 },
+ { P_GCC_GPU_GPLL0_CLK_SRC, 5 },
+ { P_GCC_GPU_GPLL0_DIV_CLK_SRC, 6 },
+};
+
+static const struct clk_parent_data gpucc_parent_data_2[] = {
+ { .index = P_BI_TCXO },
+ { .index = DT_GCC_GPU_GPLL0_CLK_SRC },
+ { .index = DT_GCC_GPU_GPLL0_DIV_CLK_SRC },
+};
+
+static const struct freq_tbl ftbl_gpucc_gmu_clk_src[] = {
+ F(200000000, P_GCC_GPU_GPLL0_DIV_CLK_SRC, 1.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gpucc_gmu_clk_src = {
+ .cmd_rcgr = 0x1120,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gpucc_parent_map_0,
+ .freq_tbl = ftbl_gpucc_gmu_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpucc_gmu_clk_src",
+ .parent_data = gpucc_parent_data_0,
+ .num_parents = ARRAY_SIZE(gpucc_parent_data_0),
+ .ops = &clk_rcg2_shared_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_gpucc_gx_gfx3d_clk_src[] = {
+ F(266000000, P_GPU_CC_PLL0_OUT_EVEN, 2, 0, 0),
+ F(390000000, P_GPU_CC_PLL0_OUT_EVEN, 2, 0, 0),
+ F(490000000, P_GPU_CC_PLL0_OUT_EVEN, 2, 0, 0),
+ F(650000000, P_GPU_CC_PLL0_OUT_EVEN, 2, 0, 0),
+ F(770000000, P_GPU_CC_PLL0_OUT_EVEN, 2, 0, 0),
+ F(840000000, P_GPU_CC_PLL0_OUT_EVEN, 2, 0, 0),
+ F(900000000, P_GPU_CC_PLL0_OUT_EVEN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gpucc_gx_gfx3d_clk_src = {
+ .cmd_rcgr = 0x101c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gpucc_parent_map_1,
+ .freq_tbl = ftbl_gpucc_gx_gfx3d_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpucc_gx_gfx3d_clk_src",
+ .parent_data = gpucc_parent_data_1,
+ .num_parents = ARRAY_SIZE(gpucc_parent_data_1),
+ .flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_branch gpucc_ahb_clk = {
+ .halt_reg = 0x1078,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1078,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_ahb_clk",
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpucc_cx_gfx3d_clk = {
+ .halt_reg = 0x10a4,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x10a4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_cx_gfx3d_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &gpucc_gx_gfx3d_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpucc_cx_gfx3d_slv_clk = {
+ .halt_reg = 0x10a8,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x10a8,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_cx_gfx3d_slv_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &gpucc_gx_gfx3d_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpucc_cx_gmu_clk = {
+ .halt_reg = 0x1098,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1098,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_cx_gmu_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &gpucc_gmu_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpucc_cx_snoc_dvm_clk = {
+ .halt_reg = 0x108c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x108c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_cx_snoc_dvm_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .index = DT_GCC_GPU_SNOC_DVM_GFX_CLK,
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpucc_cxo_aon_clk = {
+ .halt_reg = 0x1004,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_cxo_aon_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpucc_cxo_clk = {
+ .halt_reg = 0x109c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x109c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_cxo_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpucc_gx_cxo_clk = {
+ .halt_reg = 0x1060,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1060,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_gx_cxo_clk",
+ .flags = CLK_IS_CRITICAL,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpucc_gx_gfx3d_clk = {
+ .halt_reg = 0x1054,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1054,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_gx_gfx3d_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &gpucc_gx_gfx3d_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpucc_gx_gmu_clk = {
+ .halt_reg = 0x1064,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x1064,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_gx_gmu_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &gpucc_gmu_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gpucc_sleep_clk = {
+ .halt_reg = 0x1090,
+ .halt_check = BRANCH_HALT_VOTED,
+ .clkr = {
+ .enable_reg = 0x1090,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpucc_sleep_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc gpu_cx_gdsc = {
+ .gdscr = 0x106c,
+ .gds_hw_ctrl = 0x1540,
+ .pd = {
+ .name = "gpu_cx_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = VOTABLE,
+};
+
+static struct gdsc gpu_gx_gdsc = {
+ .gdscr = 0x100c,
+ .clamp_io_ctrl = 0x1508,
+ .resets = (unsigned int []){ GPU_GX_BCR, GPU_ACD_BCR, GPU_GX_ACD_MISC_BCR },
+ .reset_count = 3,
+ .pd = {
+ .name = "gpu_gx_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = CLAMP_IO | SW_RESET | AON_RESET,
+};
+
+static struct clk_regmap *gpucc_sm6375_clocks[] = {
+ [GPU_CC_AHB_CLK] = &gpucc_ahb_clk.clkr,
+ [GPU_CC_CX_GFX3D_CLK] = &gpucc_cx_gfx3d_clk.clkr,
+ [GPU_CC_CX_GFX3D_SLV_CLK] = &gpucc_cx_gfx3d_slv_clk.clkr,
+ [GPU_CC_CX_GMU_CLK] = &gpucc_cx_gmu_clk.clkr,
+ [GPU_CC_CX_SNOC_DVM_CLK] = &gpucc_cx_snoc_dvm_clk.clkr,
+ [GPU_CC_CXO_AON_CLK] = &gpucc_cxo_aon_clk.clkr,
+ [GPU_CC_CXO_CLK] = &gpucc_cxo_clk.clkr,
+ [GPU_CC_GMU_CLK_SRC] = &gpucc_gmu_clk_src.clkr,
+ [GPU_CC_GX_CXO_CLK] = &gpucc_gx_cxo_clk.clkr,
+ [GPU_CC_GX_GFX3D_CLK] = &gpucc_gx_gfx3d_clk.clkr,
+ [GPU_CC_GX_GFX3D_CLK_SRC] = &gpucc_gx_gfx3d_clk_src.clkr,
+ [GPU_CC_GX_GMU_CLK] = &gpucc_gx_gmu_clk.clkr,
+ [GPU_CC_PLL0] = &gpucc_pll0.clkr,
+ [GPU_CC_PLL1] = &gpucc_pll1.clkr,
+ [GPU_CC_SLEEP_CLK] = &gpucc_sleep_clk.clkr,
+};
+
+static const struct qcom_reset_map gpucc_sm6375_resets[] = {
+ [GPU_GX_BCR] = { 0x1008 },
+ [GPU_ACD_BCR] = { 0x1160 },
+ [GPU_GX_ACD_MISC_BCR] = { 0x8004 },
+};
+
+static struct gdsc *gpucc_sm6375_gdscs[] = {
+ [GPU_CX_GDSC] = &gpu_cx_gdsc,
+ [GPU_GX_GDSC] = &gpu_gx_gdsc,
+};
+
+static const struct regmap_config gpucc_sm6375_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x9000,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc gpucc_sm6375_desc = {
+ .config = &gpucc_sm6375_regmap_config,
+ .clks = gpucc_sm6375_clocks,
+ .num_clks = ARRAY_SIZE(gpucc_sm6375_clocks),
+ .resets = gpucc_sm6375_resets,
+ .num_resets = ARRAY_SIZE(gpucc_sm6375_resets),
+ .gdscs = gpucc_sm6375_gdscs,
+ .num_gdscs = ARRAY_SIZE(gpucc_sm6375_gdscs),
+};
+
+static const struct of_device_id gpucc_sm6375_match_table[] = {
+ { .compatible = "qcom,sm6375-gpucc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, gpucc_sm6375_match_table);
+
+static int gpucc_sm6375_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+
+ regmap = qcom_cc_map(pdev, &gpucc_sm6375_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ clk_lucid_pll_configure(&gpucc_pll0, regmap, &gpucc_pll0_config);
+ clk_lucid_pll_configure(&gpucc_pll1, regmap, &gpucc_pll1_config);
+
+ return qcom_cc_really_probe(pdev, &gpucc_sm6375_desc, regmap);
+}
+
+static struct platform_driver gpucc_sm6375_driver = {
+ .probe = gpucc_sm6375_probe,
+ .driver = {
+ .name = "gpucc-sm6375",
+ .of_match_table = gpucc_sm6375_match_table,
+ },
+};
+
+static int __init gpucc_sm6375_init(void)
+{
+ return platform_driver_register(&gpucc_sm6375_driver);
+}
+subsys_initcall(gpucc_sm6375_init);
+
+static void __exit gpucc_sm6375_exit(void)
+{
+ platform_driver_unregister(&gpucc_sm6375_driver);
+}
+module_exit(gpucc_sm6375_exit);
+
+MODULE_DESCRIPTION("QTI GPUCC SM6375 Driver");
+MODULE_LICENSE("GPL");
--
2.39.1
next prev parent reply other threads:[~2023-01-26 18:14 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-26 18:13 [PATCH v2 0/6] SM6(11|12|37)5 GPUCC Konrad Dybcio
2023-01-26 18:13 ` [PATCH v2 1/6] dt-bindings: clock: Add Qcom SM6125 GPUCC Konrad Dybcio
2023-01-27 10:21 ` Krzysztof Kozlowski
2023-01-26 18:13 ` [PATCH v2 2/6] clk: qcom: Add GPU clock controller driver for SM6125 Konrad Dybcio
2023-01-26 22:12 ` Dmitry Baryshkov
2023-01-26 18:13 ` [PATCH v2 3/6] dt-bindings: clock: Add Qcom SM6375 GPUCC Konrad Dybcio
2023-01-27 10:22 ` Krzysztof Kozlowski
2023-01-26 18:13 ` Konrad Dybcio [this message]
2023-01-26 18:13 ` [PATCH v2 5/6] dt-bindings: clock: Add Qcom SM6115 GPUCC Konrad Dybcio
2023-01-27 10:22 ` Krzysztof Kozlowski
2023-01-26 18:13 ` [PATCH v2 6/6] clk: qcom: Add GPU clock controller driver for SM6115 Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230126181335.12970-5-konrad.dybcio@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.