All of lore.kernel.org
 help / color / mirror / Atom feed
From: kan.liang@linux.intel.com
To: joro@8bytes.org, will@kernel.org, baolu.lu@linux.intel.com,
	dwmw2@infradead.org, robin.murphy@arm.com,
	robert.moore@intel.com, rafael.j.wysocki@intel.com,
	lenb@kernel.org, iommu@lists.linux.dev,
	linux-kernel@vger.kernel.org
Cc: yu-cheng.yu@intel.com, Kan Liang <kan.liang@linux.intel.com>
Subject: [PATCH V4 1/7] iommu/vt-d: Support size of the register set in DRHD
Date: Sat, 28 Jan 2023 12:04:22 -0800	[thread overview]
Message-ID: <20230128200428.1459118-2-kan.liang@linux.intel.com> (raw)
In-Reply-To: <20230128200428.1459118-1-kan.liang@linux.intel.com>

From: Kan Liang <kan.liang@linux.intel.com>

A new field, which indicates the size of the remapping hardware register
set for this remapping unit, is introduced in the DMA-remapping hardware
unit definition (DRHD) structure with the VT-d Spec 4.0. With this
information, SW doesn't need to 'guess' the size of the register set
anymore.

Update the struct acpi_dmar_hardware_unit to reflect the field. Store the
size of the register set in struct dmar_drhd_unit for each dmar device.

The 'size' information is ResvZ for the old BIOS and platforms. Fall back
to the old guessing method. There is nothing changed.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
---
 drivers/iommu/intel/dmar.c | 11 +++++++----
 include/acpi/actbl1.h      |  2 +-
 include/linux/dmar.h       |  1 +
 3 files changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
index b00a0ceb2d13..3a40fef1ec1b 100644
--- a/drivers/iommu/intel/dmar.c
+++ b/drivers/iommu/intel/dmar.c
@@ -427,6 +427,8 @@ static int dmar_parse_one_drhd(struct acpi_dmar_header *header, void *arg)
 	memcpy(dmaru->hdr, header, header->length);
 	dmaru->reg_base_addr = drhd->address;
 	dmaru->segment = drhd->segment;
+	/* The size of the register set is 2 ^ N 4 KB pages. */
+	dmaru->reg_size = 1UL << (drhd->size + 12);
 	dmaru->include_all = drhd->flags & 0x1; /* BIT0: INCLUDE_ALL */
 	dmaru->devices = dmar_alloc_dev_scope((void *)(drhd + 1),
 					      ((void *)drhd) + drhd->header.length,
@@ -956,17 +958,18 @@ static void unmap_iommu(struct intel_iommu *iommu)
 /**
  * map_iommu: map the iommu's registers
  * @iommu: the iommu to map
- * @phys_addr: the physical address of the base resgister
+ * @drhd: DMA remapping hardware definition structure
  *
  * Memory map the iommu's registers.  Start w/ a single page, and
  * possibly expand if that turns out to be insufficent.
  */
-static int map_iommu(struct intel_iommu *iommu, u64 phys_addr)
+static int map_iommu(struct intel_iommu *iommu, struct dmar_drhd_unit *drhd)
 {
+	u64 phys_addr = drhd->reg_base_addr;
 	int map_size, err=0;
 
 	iommu->reg_phys = phys_addr;
-	iommu->reg_size = VTD_PAGE_SIZE;
+	iommu->reg_size = drhd->reg_size;
 
 	if (!request_mem_region(iommu->reg_phys, iommu->reg_size, iommu->name)) {
 		pr_err("Can't reserve memory\n");
@@ -1050,7 +1053,7 @@ static int alloc_iommu(struct dmar_drhd_unit *drhd)
 	}
 	sprintf(iommu->name, "dmar%d", iommu->seq_id);
 
-	err = map_iommu(iommu, drhd->reg_base_addr);
+	err = map_iommu(iommu, drhd);
 	if (err) {
 		pr_err("Failed to map %s\n", iommu->name);
 		goto error_free_seq_id;
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index 4175dce3967c..bdded0ac46eb 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -802,7 +802,7 @@ struct acpi_dmar_pci_path {
 struct acpi_dmar_hardware_unit {
 	struct acpi_dmar_header header;
 	u8 flags;
-	u8 reserved;
+	u8 size;		/* Size of the register set */
 	u16 segment;
 	u64 address;		/* Register Base Address */
 };
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index d81a51978d01..725d5e6acec0 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -39,6 +39,7 @@ struct dmar_drhd_unit {
 	struct list_head list;		/* list of drhd units	*/
 	struct  acpi_dmar_header *hdr;	/* ACPI header		*/
 	u64	reg_base_addr;		/* register base address*/
+	unsigned long reg_size;		/* size of register set */
 	struct	dmar_dev_scope *devices;/* target device array	*/
 	int	devices_cnt;		/* target device count	*/
 	u16	segment;		/* PCI domain		*/
-- 
2.35.1


  reply	other threads:[~2023-01-28 20:04 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-28 20:04 [PATCH V4 0/7] iommu/vt-d: Support performance monitoring for IOMMU kan.liang
2023-01-28 20:04 ` kan.liang [this message]
2023-01-28 20:04 ` [PATCH V4 2/7] iommu/vt-d: Retrieve IOMMU perfmon capability information kan.liang
2023-01-28 20:04 ` [PATCH V4 3/7] iommu/vt-d: Support Enhanced Command Interface kan.liang
2023-01-28 20:04 ` [PATCH V4 4/7] iommu/vt-d: Add IOMMU perfmon support kan.liang
2023-01-28 20:04 ` [PATCH V4 5/7] iommu/vt-d: Support cpumask for IOMMU perfmon kan.liang
2023-01-28 20:04 ` [PATCH V4 6/7] iommu/vt-d: Add IOMMU perfmon overflow handler support kan.liang
2023-01-28 20:04 ` [PATCH V4 7/7] iommu/vt-d: Enable IOMMU perfmon support kan.liang
2023-01-31  7:54 ` [PATCH V4 0/7] iommu/vt-d: Support performance monitoring for IOMMU Baolu Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230128200428.1459118-2-kan.liang@linux.intel.com \
    --to=kan.liang@linux.intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=dwmw2@infradead.org \
    --cc=iommu@lists.linux.dev \
    --cc=joro@8bytes.org \
    --cc=lenb@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rafael.j.wysocki@intel.com \
    --cc=robert.moore@intel.com \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    --cc=yu-cheng.yu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.