All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Daniel Lezcano <daniel.lezcano@linaro.org>,
	Wolfram Sang <wsa@kernel.org>,
	linux-pm@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	"Wolfram Sang" <wsa+renesas@sang-engineering.com>
Subject: [PATCH v2 3/3] drivers/thermal/rcar_gen3_thermal: Fix device initialization
Date: Wed,  8 Feb 2023 20:03:33 +0100	[thread overview]
Message-ID: <20230208190333.3159879-4-niklas.soderlund+renesas@ragnatech.se> (raw)
In-Reply-To: <20230208190333.3159879-1-niklas.soderlund+renesas@ragnatech.se>

The thermal zone is registered before the device is register and the
thermal coefficients are calculated, providing a window for very
incorrect readings.

The reason why the zone was register before the device was fully
initialized was that the presence of the set_trips() callback is used to
determine if the driver supports interrupt or not, as it is not defined
if the device is incapable of interrupts.

Fix this by using the operations structure in the private data instead
of the zone to determine if interrupts are available or not, and
initialize the device before registering the zone.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/thermal/rcar_gen3_thermal.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 2dfce4f09631..8835846884d1 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -89,7 +89,8 @@ struct rcar_gen3_thermal_priv {
 	struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM];
 	struct thermal_zone_device_ops ops;
 	unsigned int num_tscs;
-	void (*thermal_init)(struct rcar_gen3_thermal_tsc *tsc);
+	void (*thermal_init)(struct rcar_gen3_thermal_priv *priv,
+			     struct rcar_gen3_thermal_tsc *tsc);
 	int ptat[3];
 };
 
@@ -240,7 +241,7 @@ static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data)
 	for (i = 0; i < priv->num_tscs; i++) {
 		status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR);
 		rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0);
-		if (status)
+		if (status && priv->tscs[i]->zone)
 			thermal_zone_device_update(priv->tscs[i]->zone,
 						   THERMAL_EVENT_UNSPECIFIED);
 	}
@@ -311,7 +312,8 @@ static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
 	return true;
 }
 
-static void rcar_gen3_thermal_init_r8a7795es1(struct rcar_gen3_thermal_tsc *tsc)
+static void rcar_gen3_thermal_init_r8a7795es1(struct rcar_gen3_thermal_priv *priv,
+					      struct rcar_gen3_thermal_tsc *tsc)
 {
 	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,  CTSR_THBGR);
 	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,  0x0);
@@ -322,7 +324,7 @@ static void rcar_gen3_thermal_init_r8a7795es1(struct rcar_gen3_thermal_tsc *tsc)
 
 	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0x3F);
 	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
-	if (tsc->zone->ops->set_trips)
+	if (priv->ops.set_trips)
 		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN,
 					IRQ_TEMPD1 | IRQ_TEMP2);
 
@@ -338,7 +340,8 @@ static void rcar_gen3_thermal_init_r8a7795es1(struct rcar_gen3_thermal_tsc *tsc)
 	usleep_range(1000, 2000);
 }
 
-static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
+static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_priv *priv,
+				   struct rcar_gen3_thermal_tsc *tsc)
 {
 	u32 reg_val;
 
@@ -350,7 +353,7 @@ static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
 
 	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0);
 	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
-	if (tsc->zone->ops->set_trips)
+	if (priv->ops.set_trips)
 		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN,
 					IRQ_TEMPD1 | IRQ_TEMP2);
 
@@ -510,6 +513,9 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 	for (i = 0; i < priv->num_tscs; i++) {
 		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
 
+		priv->thermal_init(priv, tsc);
+		rcar_gen3_thermal_calc_coefs(priv, tsc, *ths_tj_1);
+
 		zone = devm_thermal_of_zone_register(dev, i, tsc, &priv->ops);
 		if (IS_ERR(zone)) {
 			dev_err(dev, "Sensor %u: Can't register thermal zone\n", i);
@@ -518,9 +524,6 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		}
 		tsc->zone = zone;
 
-		priv->thermal_init(tsc);
-		rcar_gen3_thermal_calc_coefs(priv, tsc, *ths_tj_1);
-
 		tsc->zone->tzp->no_hwmon = false;
 		ret = thermal_add_hwmon_sysfs(tsc->zone);
 		if (ret)
@@ -558,7 +561,7 @@ static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev)
 	for (i = 0; i < priv->num_tscs; i++) {
 		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
 
-		priv->thermal_init(tsc);
+		priv->thermal_init(priv, tsc);
 	}
 
 	return 0;
-- 
2.39.1


  parent reply	other threads:[~2023-02-08 19:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-08 19:03 [PATCH v2 0/3] drivers/thermal/rcar_gen3_thermal: Fix device initialization Niklas Söderlund
2023-02-08 19:03 ` [PATCH v2 1/3] drivers/thermal/rcar_gen3_thermal: Do not call set_trips() when resuming Niklas Söderlund
2023-02-08 19:03 ` [PATCH v2 2/3] drivers/thermal/rcar_gen3_thermal: Create device local ops struct Niklas Söderlund
2023-02-08 19:03 ` Niklas Söderlund [this message]
2023-02-10 10:27 ` [PATCH v2 0/3] drivers/thermal/rcar_gen3_thermal: Fix device initialization Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230208190333.3159879-4-niklas.soderlund+renesas@ragnatech.se \
    --to=niklas.soderlund+renesas@ragnatech.se \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=wsa+renesas@sang-engineering.com \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.