All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabiano Rosas <farosas@suse.de>
To: qemu-devel@nongnu.org
Cc: "Claudio Fontana" <cfontana@suse.de>,
	jfehlig@suse.com, dfaggioli@suse.com, dgilbert@redhat.com,
	"Daniel P . Berrangé" <berrange@redhat.com>,
	"Juan Quintela" <quintela@redhat.com>,
	"Nikolay Borisov" <nborisov@suse.com>
Subject: [RFC PATCH v1 11/26] migration: Refactor precopy ram loading code
Date: Thu, 30 Mar 2023 15:03:21 -0300	[thread overview]
Message-ID: <20230330180336.2791-12-farosas@suse.de> (raw)
In-Reply-To: <20230330180336.2791-1-farosas@suse.de>

From: Nikolay Borisov <nborisov@suse.com>

To facilitate the implementation of the 'fixed-ram' migration restore,
factor out the code responsible for parsing the ramblocks
headers. This also makes ram_load_precopy easier to comprehend.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
---
 migration/ram.c | 142 +++++++++++++++++++++++++++---------------------
 1 file changed, 80 insertions(+), 62 deletions(-)

diff --git a/migration/ram.c b/migration/ram.c
index 56f0f782c8..5c085d6154 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -4319,6 +4319,83 @@ void colo_flush_ram_cache(void)
     trace_colo_flush_ram_cache_end();
 }
 
+static int parse_ramblock(QEMUFile *f, RAMBlock *block, ram_addr_t length)
+{
+    int ret = 0;
+    /* ADVISE is earlier, it shows the source has the postcopy capability on */
+    bool postcopy_advised = migration_incoming_postcopy_advised();
+
+    assert(block);
+
+    if (!qemu_ram_is_migratable(block)) {
+        error_report("block %s should not be migrated !", block->idstr);
+        ret = -EINVAL;
+    }
+
+    if (length != block->used_length) {
+        Error *local_err = NULL;
+
+        ret = qemu_ram_resize(block, length, &local_err);
+        if (local_err) {
+            error_report_err(local_err);
+        }
+    }
+    /* For postcopy we need to check hugepage sizes match */
+    if (postcopy_advised && migrate_postcopy_ram() &&
+        block->page_size != qemu_host_page_size) {
+        uint64_t remote_page_size = qemu_get_be64(f);
+        if (remote_page_size != block->page_size) {
+            error_report("Mismatched RAM page size %s "
+                         "(local) %zd != %" PRId64, block->idstr,
+                         block->page_size, remote_page_size);
+            ret = -EINVAL;
+        }
+    }
+    if (migrate_ignore_shared()) {
+        hwaddr addr = qemu_get_be64(f);
+        if (ramblock_is_ignored(block) &&
+            block->mr->addr != addr) {
+            error_report("Mismatched GPAs for block %s "
+                         "%" PRId64 "!= %" PRId64, block->idstr,
+                         (uint64_t)addr,
+                         (uint64_t)block->mr->addr);
+            ret = -EINVAL;
+        }
+    }
+    ram_control_load_hook(f, RAM_CONTROL_BLOCK_REG, block->idstr);
+
+    return ret;
+}
+
+static int parse_ramblocks(QEMUFile *f, ram_addr_t total_ram_bytes)
+{
+    int ret = 0;
+
+    /* Synchronize RAM block list */
+    while (!ret && total_ram_bytes) {
+        char id[256];
+        RAMBlock *block;
+        ram_addr_t length;
+        int len = qemu_get_byte(f);
+
+        qemu_get_buffer(f, (uint8_t *)id, len);
+        id[len] = 0;
+        length = qemu_get_be64(f);
+
+        block = qemu_ram_block_by_name(id);
+        if (block) {
+            ret = parse_ramblock(f, block, length);
+        } else {
+            error_report("Unknown ramblock \"%s\", cannot accept "
+                         "migration", id);
+            ret = -EINVAL;
+        }
+        total_ram_bytes -= length;
+    }
+
+    return ret;
+}
+
 /**
  * ram_load_precopy: load pages in precopy case
  *
@@ -4333,14 +4410,13 @@ static int ram_load_precopy(QEMUFile *f)
 {
     MigrationIncomingState *mis = migration_incoming_get_current();
     int flags = 0, ret = 0, invalid_flags = 0, len = 0, i = 0;
-    /* ADVISE is earlier, it shows the source has the postcopy capability on */
-    bool postcopy_advised = migration_incoming_postcopy_advised();
+
     if (!migrate_use_compression()) {
         invalid_flags |= RAM_SAVE_FLAG_COMPRESS_PAGE;
     }
 
     while (!ret && !(flags & RAM_SAVE_FLAG_EOS)) {
-        ram_addr_t addr, total_ram_bytes;
+        ram_addr_t addr;
         void *host = NULL, *host_bak = NULL;
         uint8_t ch;
 
@@ -4411,65 +4487,7 @@ static int ram_load_precopy(QEMUFile *f)
 
         switch (flags & ~RAM_SAVE_FLAG_CONTINUE) {
         case RAM_SAVE_FLAG_MEM_SIZE:
-            /* Synchronize RAM block list */
-            total_ram_bytes = addr;
-            while (!ret && total_ram_bytes) {
-                RAMBlock *block;
-                char id[256];
-                ram_addr_t length;
-
-                len = qemu_get_byte(f);
-                qemu_get_buffer(f, (uint8_t *)id, len);
-                id[len] = 0;
-                length = qemu_get_be64(f);
-
-                block = qemu_ram_block_by_name(id);
-                if (block && !qemu_ram_is_migratable(block)) {
-                    error_report("block %s should not be migrated !", id);
-                    ret = -EINVAL;
-                } else if (block) {
-                    if (length != block->used_length) {
-                        Error *local_err = NULL;
-
-                        ret = qemu_ram_resize(block, length,
-                                              &local_err);
-                        if (local_err) {
-                            error_report_err(local_err);
-                        }
-                    }
-                    /* For postcopy we need to check hugepage sizes match */
-                    if (postcopy_advised && migrate_postcopy_ram() &&
-                        block->page_size != qemu_host_page_size) {
-                        uint64_t remote_page_size = qemu_get_be64(f);
-                        if (remote_page_size != block->page_size) {
-                            error_report("Mismatched RAM page size %s "
-                                         "(local) %zd != %" PRId64,
-                                         id, block->page_size,
-                                         remote_page_size);
-                            ret = -EINVAL;
-                        }
-                    }
-                    if (migrate_ignore_shared()) {
-                        hwaddr addr = qemu_get_be64(f);
-                        if (ramblock_is_ignored(block) &&
-                            block->mr->addr != addr) {
-                            error_report("Mismatched GPAs for block %s "
-                                         "%" PRId64 "!= %" PRId64,
-                                         id, (uint64_t)addr,
-                                         (uint64_t)block->mr->addr);
-                            ret = -EINVAL;
-                        }
-                    }
-                    ram_control_load_hook(f, RAM_CONTROL_BLOCK_REG,
-                                          block->idstr);
-                } else {
-                    error_report("Unknown ramblock \"%s\", cannot "
-                                 "accept migration", id);
-                    ret = -EINVAL;
-                }
-
-                total_ram_bytes -= length;
-            }
+            ret = parse_ramblocks(f, addr);
             break;
 
         case RAM_SAVE_FLAG_ZERO:
-- 
2.35.3



  parent reply	other threads:[~2023-03-30 18:05 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-30 18:03 [RFC PATCH v1 00/26] migration: File based migration with multifd and fixed-ram Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 01/26] migration: Add support for 'file:' uri for source migration Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 02/26] migration: Add support for 'file:' uri for incoming migration Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 03/26] tests/qtest: migration: Add migrate_incoming_qmp helper Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 04/26] tests/qtest: migration-test: Add tests for file-based migration Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 05/26] migration: Initial support of fixed-ram feature for analyze-migration.py Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 06/26] io: add and implement QIO_CHANNEL_FEATURE_SEEKABLE for channel file Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 07/26] io: Add generic pwritev/preadv interface Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 08/26] io: implement io_pwritev/preadv for QIOChannelFile Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 09/26] migration/qemu-file: add utility methods for working with seekable channels Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 10/26] migration/ram: Introduce 'fixed-ram' migration stream capability Fabiano Rosas
2023-03-30 22:01   ` Peter Xu
2023-03-31  7:56     ` Daniel P. Berrangé
2023-03-31 14:39       ` Peter Xu
2023-03-31 15:34         ` Daniel P. Berrangé
2023-03-31 16:13           ` Peter Xu
2023-03-31 15:05     ` Fabiano Rosas
2023-03-31  5:50   ` Markus Armbruster
2023-03-30 18:03 ` Fabiano Rosas [this message]
2023-03-30 18:03 ` [RFC PATCH v1 12/26] migration: Add support for 'fixed-ram' migration restore Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 13/26] tests/qtest: migration-test: Add tests for fixed-ram file-based migration Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 14/26] migration: Add completion tracepoint Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 15/26] migration/multifd: Remove direct "socket" references Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 16/26] migration/multifd: Allow multifd without packets Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 17/26] migration/multifd: Add outgoing QIOChannelFile support Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 18/26] migration/multifd: Add incoming " Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 19/26] migration/multifd: Add pages to the receiving side Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 20/26] io: Add a pwritev/preadv version that takes a discontiguous iovec Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 21/26] migration/ram: Add a wrapper for fixed-ram shadow bitmap Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 22/26] migration/multifd: Support outgoing fixed-ram stream format Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 23/26] migration/multifd: Support incoming " Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 24/26] tests/qtest: Add a multifd + fixed-ram migration test Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 25/26] migration: Add direct-io parameter Fabiano Rosas
2023-03-30 18:03 ` [RFC PATCH v1 26/26] tests/migration/guestperf: Add file, fixed-ram and direct-io support Fabiano Rosas
2023-03-30 21:41 ` [RFC PATCH v1 00/26] migration: File based migration with multifd and fixed-ram Peter Xu
2023-03-31 14:37   ` Fabiano Rosas
2023-03-31 14:52     ` Peter Xu
2023-03-31 15:30       ` Fabiano Rosas
2023-03-31 15:55         ` Peter Xu
2023-03-31 16:10           ` Daniel P. Berrangé
2023-03-31 16:27             ` Peter Xu
2023-03-31 18:18               ` Fabiano Rosas
2023-03-31 21:52                 ` Peter Xu
2023-04-03  7:47                   ` Claudio Fontana
2023-04-03 19:26                     ` Peter Xu
2023-04-04  8:00                       ` Claudio Fontana
2023-04-04 14:53                         ` Peter Xu
2023-04-04 15:10                           ` Claudio Fontana
2023-04-04 15:56                             ` Peter Xu
2023-04-06 16:46                               ` Fabiano Rosas
2023-04-07 10:36                                 ` Claudio Fontana
2023-04-11 15:48                                   ` Peter Xu
2023-04-18 16:58               ` Daniel P. Berrangé
2023-04-18 19:26                 ` Peter Xu
2023-04-19 17:12                   ` Daniel P. Berrangé
2023-04-19 19:07                     ` Peter Xu
2023-04-20  9:02                       ` Daniel P. Berrangé
2023-04-20 19:19                         ` Peter Xu
2023-04-21  7:48                           ` Daniel P. Berrangé
2023-04-21 13:56                             ` Peter Xu
2023-03-31 15:46       ` Daniel P. Berrangé
2023-04-03  7:38 ` David Hildenbrand
2023-04-03 14:41   ` Fabiano Rosas
2023-04-03 16:24     ` David Hildenbrand
2023-04-03 16:36       ` Fabiano Rosas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230330180336.2791-12-farosas@suse.de \
    --to=farosas@suse.de \
    --cc=berrange@redhat.com \
    --cc=cfontana@suse.de \
    --cc=dfaggioli@suse.com \
    --cc=dgilbert@redhat.com \
    --cc=jfehlig@suse.com \
    --cc=nborisov@suse.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.