All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joy Chakraborty <joychakr@google.com>
To: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	manugautam@google.com, Joy Chakraborty <joychakr@google.com>,
	Serge Semin <fancer.lancer@gmail.com>
Subject: [PATCH v11 2/3] spi: dw: Add DMA address widths capability check
Date: Fri, 12 May 2023 10:47:44 +0000	[thread overview]
Message-ID: <20230512104746.1797865-3-joychakr@google.com> (raw)
In-Reply-To: <20230512104746.1797865-1-joychakr@google.com>

Store address width capabilities of DMA controller during init and check
the same per transfer to make sure the bits/word requirement can be met.

Current DW DMA driver requires both tx and rx channel to be configured
and functional hence a subset of both tx and rx channel address width
capability is checked with the width requirement(n_bytes) for a
transfer.

Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
* tested on Baikal-T1 based system with DW SPI-looped back interface
transferring a chunk of data with DFS:8,12,16.
---
 drivers/spi/spi-dw-dma.c | 15 ++++++++++++++-
 drivers/spi/spi-dw.h     |  1 +
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c
index 2363317a0dca..df819652901a 100644
--- a/drivers/spi/spi-dw-dma.c
+++ b/drivers/spi/spi-dw-dma.c
@@ -98,6 +98,13 @@ static int dw_spi_dma_caps_init(struct dw_spi *dws)
 	else
 		dws->dma_sg_burst = 0;
 
+	/*
+	 * Assuming both channels belong to the same DMA controller hence the
+	 * peripheral side address width capabilities most likely would be
+	 * the same.
+	 */
+	dws->dma_addr_widths = tx.dst_addr_widths & rx.src_addr_widths;
+
 	return 0;
 }
 
@@ -239,8 +246,14 @@ static bool dw_spi_can_dma(struct spi_controller *master,
 			   struct spi_device *spi, struct spi_transfer *xfer)
 {
 	struct dw_spi *dws = spi_controller_get_devdata(master);
+	enum dma_slave_buswidth dma_bus_width;
+
+	if (xfer->len <= dws->fifo_len)
+		return false;
+
+	dma_bus_width = dw_spi_dma_convert_width(dws->n_bytes);
 
-	return xfer->len > dws->fifo_len;
+	return dws->dma_addr_widths & BIT(dma_bus_width);
 }
 
 static int dw_spi_dma_wait(struct dw_spi *dws, unsigned int len, u32 speed)
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 9e8eb2b52d5c..3962e6dcf880 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -190,6 +190,7 @@ struct dw_spi {
 	struct dma_chan		*rxchan;
 	u32			rxburst;
 	u32			dma_sg_burst;
+	u32			dma_addr_widths;
 	unsigned long		dma_chan_busy;
 	dma_addr_t		dma_addr; /* phy address of the Data register */
 	const struct dw_spi_dma_ops *dma_ops;
-- 
2.40.1.606.ga4b1b128d6-goog


  parent reply	other threads:[~2023-05-12 10:49 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-12 10:47 [PATCH v11 0/3] spi: dw: DW SPI DMA Driver updates Joy Chakraborty
2023-05-12 10:47 ` [PATCH v11 1/3] spi: dw: Add DMA directional capability check Joy Chakraborty
2023-05-12 10:47 ` Joy Chakraborty [this message]
2023-05-12 10:47 ` [PATCH v11 3/3] spi: dw: Round of n_bytes to power of 2 Joy Chakraborty
2023-05-17 23:03   ` Andy Shevchenko
2023-05-15 15:22 ` [PATCH v11 0/3] spi: dw: DW SPI DMA Driver updates Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230512104746.1797865-3-joychakr@google.com \
    --to=joychakr@google.com \
    --cc=broonie@kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=manugautam@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.