From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 30/33] hw/arm/raspi: Import Linux raspi definitions as 'raspberrypi-fw-defs.h'
Date: Mon, 19 Jun 2023 15:29:11 +0100 [thread overview]
Message-ID: <20230619142914.963184-31-peter.maydell@linaro.org> (raw)
In-Reply-To: <20230619142914.963184-1-peter.maydell@linaro.org>
From: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230612223456.33824-2-philmd@linaro.org
Message-Id: <20230531155258.8361-1-sergey.kambalin@auriga.com>
[PMD: Split from bigger patch: 1/4]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/hw/misc/raspberrypi-fw-defs.h | 163 ++++++++++++++++++++++++++
1 file changed, 163 insertions(+)
create mode 100644 include/hw/misc/raspberrypi-fw-defs.h
diff --git a/include/hw/misc/raspberrypi-fw-defs.h b/include/hw/misc/raspberrypi-fw-defs.h
new file mode 100644
index 00000000000..4551fe7450d
--- /dev/null
+++ b/include/hw/misc/raspberrypi-fw-defs.h
@@ -0,0 +1,163 @@
+/*
+ * Raspberry Pi firmware definitions
+ *
+ * Copyright (C) 2022 Auriga LLC, based on Linux kernel
+ * `include/soc/bcm2835/raspberrypi-firmware.h` (Copyright © 2015 Broadcom)
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_
+#define INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_
+
+#include "qemu/osdep.h"
+
+enum rpi_firmware_property_tag {
+ RPI_FWREQ_PROPERTY_END = 0,
+ RPI_FWREQ_GET_FIRMWARE_REVISION = 0x00000001,
+ RPI_FWREQ_GET_FIRMWARE_VARIANT = 0x00000002,
+ RPI_FWREQ_GET_FIRMWARE_HASH = 0x00000003,
+
+ RPI_FWREQ_SET_CURSOR_INFO = 0x00008010,
+ RPI_FWREQ_SET_CURSOR_STATE = 0x00008011,
+
+ RPI_FWREQ_GET_BOARD_MODEL = 0x00010001,
+ RPI_FWREQ_GET_BOARD_REVISION = 0x00010002,
+ RPI_FWREQ_GET_BOARD_MAC_ADDRESS = 0x00010003,
+ RPI_FWREQ_GET_BOARD_SERIAL = 0x00010004,
+ RPI_FWREQ_GET_ARM_MEMORY = 0x00010005,
+ RPI_FWREQ_GET_VC_MEMORY = 0x00010006,
+ RPI_FWREQ_GET_CLOCKS = 0x00010007,
+ RPI_FWREQ_GET_POWER_STATE = 0x00020001,
+ RPI_FWREQ_GET_TIMING = 0x00020002,
+ RPI_FWREQ_SET_POWER_STATE = 0x00028001,
+ RPI_FWREQ_GET_CLOCK_STATE = 0x00030001,
+ RPI_FWREQ_GET_CLOCK_RATE = 0x00030002,
+ RPI_FWREQ_GET_VOLTAGE = 0x00030003,
+ RPI_FWREQ_GET_MAX_CLOCK_RATE = 0x00030004,
+ RPI_FWREQ_GET_MAX_VOLTAGE = 0x00030005,
+ RPI_FWREQ_GET_TEMPERATURE = 0x00030006,
+ RPI_FWREQ_GET_MIN_CLOCK_RATE = 0x00030007,
+ RPI_FWREQ_GET_MIN_VOLTAGE = 0x00030008,
+ RPI_FWREQ_GET_TURBO = 0x00030009,
+ RPI_FWREQ_GET_MAX_TEMPERATURE = 0x0003000a,
+ RPI_FWREQ_GET_STC = 0x0003000b,
+ RPI_FWREQ_ALLOCATE_MEMORY = 0x0003000c,
+ RPI_FWREQ_LOCK_MEMORY = 0x0003000d,
+ RPI_FWREQ_UNLOCK_MEMORY = 0x0003000e,
+ RPI_FWREQ_RELEASE_MEMORY = 0x0003000f,
+ RPI_FWREQ_EXECUTE_CODE = 0x00030010,
+ RPI_FWREQ_EXECUTE_QPU = 0x00030011,
+ RPI_FWREQ_SET_ENABLE_QPU = 0x00030012,
+ RPI_FWREQ_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014,
+ RPI_FWREQ_GET_EDID_BLOCK = 0x00030020,
+ RPI_FWREQ_GET_CUSTOMER_OTP = 0x00030021,
+ RPI_FWREQ_GET_EDID_BLOCK_DISPLAY = 0x00030023,
+ RPI_FWREQ_GET_DOMAIN_STATE = 0x00030030,
+ RPI_FWREQ_GET_THROTTLED = 0x00030046,
+ RPI_FWREQ_GET_CLOCK_MEASURED = 0x00030047,
+ RPI_FWREQ_NOTIFY_REBOOT = 0x00030048,
+ RPI_FWREQ_SET_CLOCK_STATE = 0x00038001,
+ RPI_FWREQ_SET_CLOCK_RATE = 0x00038002,
+ RPI_FWREQ_SET_VOLTAGE = 0x00038003,
+ RPI_FWREQ_SET_MAX_CLOCK_RATE = 0x00038004,
+ RPI_FWREQ_SET_MIN_CLOCK_RATE = 0x00038007,
+ RPI_FWREQ_SET_TURBO = 0x00038009,
+ RPI_FWREQ_SET_CUSTOMER_OTP = 0x00038021,
+ RPI_FWREQ_SET_DOMAIN_STATE = 0x00038030,
+ RPI_FWREQ_GET_GPIO_STATE = 0x00030041,
+ RPI_FWREQ_SET_GPIO_STATE = 0x00038041,
+ RPI_FWREQ_SET_SDHOST_CLOCK = 0x00038042,
+ RPI_FWREQ_GET_GPIO_CONFIG = 0x00030043,
+ RPI_FWREQ_SET_GPIO_CONFIG = 0x00038043,
+ RPI_FWREQ_GET_PERIPH_REG = 0x00030045,
+ RPI_FWREQ_SET_PERIPH_REG = 0x00038045,
+ RPI_FWREQ_GET_POE_HAT_VAL = 0x00030049,
+ RPI_FWREQ_SET_POE_HAT_VAL = 0x00038049,
+ RPI_FWREQ_SET_POE_HAT_VAL_OLD = 0x00030050,
+ RPI_FWREQ_NOTIFY_XHCI_RESET = 0x00030058,
+ RPI_FWREQ_GET_REBOOT_FLAGS = 0x00030064,
+ RPI_FWREQ_SET_REBOOT_FLAGS = 0x00038064,
+ RPI_FWREQ_NOTIFY_DISPLAY_DONE = 0x00030066,
+
+ /* Dispmanx TAGS */
+ RPI_FWREQ_FRAMEBUFFER_ALLOCATE = 0x00040001,
+ RPI_FWREQ_FRAMEBUFFER_BLANK = 0x00040002,
+ RPI_FWREQ_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT = 0x00040003,
+ RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_WIDTH_HEIGHT = 0x00040004,
+ RPI_FWREQ_FRAMEBUFFER_GET_DEPTH = 0x00040005,
+ RPI_FWREQ_FRAMEBUFFER_GET_PIXEL_ORDER = 0x00040006,
+ RPI_FWREQ_FRAMEBUFFER_GET_ALPHA_MODE = 0x00040007,
+ RPI_FWREQ_FRAMEBUFFER_GET_PITCH = 0x00040008,
+ RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009,
+ RPI_FWREQ_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a,
+ RPI_FWREQ_FRAMEBUFFER_GET_PALETTE = 0x0004000b,
+ RPI_FWREQ_FRAMEBUFFER_GET_LAYER = 0x0004000c,
+ RPI_FWREQ_FRAMEBUFFER_GET_TRANSFORM = 0x0004000d,
+ RPI_FWREQ_FRAMEBUFFER_GET_VSYNC = 0x0004000e,
+ RPI_FWREQ_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f,
+ RPI_FWREQ_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010,
+ RPI_FWREQ_FRAMEBUFFER_RELEASE = 0x00048001,
+ RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_ID = 0x00040016,
+ RPI_FWREQ_FRAMEBUFFER_SET_DISPLAY_NUM = 0x00048013,
+ RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS = 0x00040013,
+ RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_SETTINGS = 0x00040014,
+ RPI_FWREQ_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003,
+ RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004,
+ RPI_FWREQ_FRAMEBUFFER_TEST_DEPTH = 0x00044005,
+ RPI_FWREQ_FRAMEBUFFER_TEST_PIXEL_ORDER = 0x00044006,
+ RPI_FWREQ_FRAMEBUFFER_TEST_ALPHA_MODE = 0x00044007,
+ RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009,
+ RPI_FWREQ_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a,
+ RPI_FWREQ_FRAMEBUFFER_TEST_PALETTE = 0x0004400b,
+ RPI_FWREQ_FRAMEBUFFER_TEST_LAYER = 0x0004400c,
+ RPI_FWREQ_FRAMEBUFFER_TEST_TRANSFORM = 0x0004400d,
+ RPI_FWREQ_FRAMEBUFFER_TEST_VSYNC = 0x0004400e,
+ RPI_FWREQ_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003,
+ RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004,
+ RPI_FWREQ_FRAMEBUFFER_SET_DEPTH = 0x00048005,
+ RPI_FWREQ_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006,
+ RPI_FWREQ_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007,
+ RPI_FWREQ_FRAMEBUFFER_SET_PITCH = 0x00048008,
+ RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009,
+ RPI_FWREQ_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a,
+ RPI_FWREQ_FRAMEBUFFER_SET_PALETTE = 0x0004800b,
+
+ RPI_FWREQ_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f,
+ RPI_FWREQ_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020,
+ RPI_FWREQ_FRAMEBUFFER_SET_VSYNC = 0x0004800e,
+ RPI_FWREQ_FRAMEBUFFER_SET_LAYER = 0x0004800c,
+ RPI_FWREQ_FRAMEBUFFER_SET_TRANSFORM = 0x0004800d,
+ RPI_FWREQ_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f,
+
+ RPI_FWREQ_VCHIQ_INIT = 0x00048010,
+
+ RPI_FWREQ_SET_PLANE = 0x00048015,
+ RPI_FWREQ_GET_DISPLAY_TIMING = 0x00040017,
+ RPI_FWREQ_SET_TIMING = 0x00048017,
+ RPI_FWREQ_GET_DISPLAY_CFG = 0x00040018,
+ RPI_FWREQ_SET_DISPLAY_POWER = 0x00048019,
+ RPI_FWREQ_GET_COMMAND_LINE = 0x00050001,
+ RPI_FWREQ_GET_DMA_CHANNELS = 0x00060001,
+};
+
+enum rpi_firmware_clk_id {
+ RPI_FIRMWARE_EMMC_CLK_ID = 1,
+ RPI_FIRMWARE_UART_CLK_ID,
+ RPI_FIRMWARE_ARM_CLK_ID,
+ RPI_FIRMWARE_CORE_CLK_ID,
+ RPI_FIRMWARE_V3D_CLK_ID,
+ RPI_FIRMWARE_H264_CLK_ID,
+ RPI_FIRMWARE_ISP_CLK_ID,
+ RPI_FIRMWARE_SDRAM_CLK_ID,
+ RPI_FIRMWARE_PIXEL_CLK_ID,
+ RPI_FIRMWARE_PWM_CLK_ID,
+ RPI_FIRMWARE_HEVC_CLK_ID,
+ RPI_FIRMWARE_EMMC2_CLK_ID,
+ RPI_FIRMWARE_M2MC_CLK_ID,
+ RPI_FIRMWARE_PIXEL_BVB_CLK_ID,
+ RPI_FIRMWARE_VEC_CLK_ID,
+ RPI_FIRMWARE_NUM_CLK_ID,
+};
+
+#endif /* INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_ */
--
2.34.1
next prev parent reply other threads:[~2023-06-19 14:33 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-19 14:28 [PULL 00/33] target-arm queue Peter Maydell
2023-06-19 14:28 ` [PULL 01/33] target/arm: Fix return value from LDSMIN/LDSMAX 8/16 bit atomics Peter Maydell
2023-06-19 14:28 ` [PULL 02/33] target/arm: Return correct result for LDG when ATA=0 Peter Maydell
2023-06-19 14:28 ` [PULL 03/33] target/arm: Pass memop to gen_mte_check1_mmuidx() in reg_imm9 decode Peter Maydell
2023-06-19 14:28 ` [PULL 04/33] target/arm: Consistently use finalize_memop_asimd() for ASIMD loads/stores Peter Maydell
2023-06-19 14:28 ` [PULL 05/33] target/arm: Convert hint instruction space to decodetree Peter Maydell
2023-06-19 14:28 ` [PULL 06/33] target/arm: Convert barrier insns " Peter Maydell
2023-06-19 14:28 ` [PULL 07/33] target/arm: Convert CFINV, XAFLAG and AXFLAG " Peter Maydell
2023-06-19 14:28 ` [PULL 08/33] target/arm: Convert MSR (immediate) " Peter Maydell
2023-06-19 14:28 ` [PULL 09/33] target/arm: Convert MSR (reg), MRS, SYS, SYSL " Peter Maydell
2023-06-19 14:28 ` [PULL 10/33] target/arm: Convert exception generation instructions " Peter Maydell
2023-06-19 14:28 ` [PULL 11/33] target/arm: Convert load/store exclusive and ordered " Peter Maydell
2023-06-19 14:28 ` [PULL 12/33] target/arm: Convert LDXP, STXP, CASP, CAS " Peter Maydell
2023-06-19 14:28 ` [PULL 13/33] target/arm: Convert load reg (literal) group " Peter Maydell
2023-06-19 14:28 ` [PULL 14/33] target/arm: Convert load/store-pair " Peter Maydell
2023-06-19 14:28 ` [PULL 15/33] target/arm: Convert ld/st reg+imm9 insns " Peter Maydell
2023-06-19 14:28 ` [PULL 16/33] target/arm: Convert LDR/STR with 12-bit immediate " Peter Maydell
2023-06-19 14:28 ` [PULL 17/33] target/arm: Convert LDR/STR reg+reg " Peter Maydell
2023-06-19 14:28 ` [PULL 18/33] target/arm: Convert atomic memory ops " Peter Maydell
2023-06-19 14:29 ` [PULL 19/33] target/arm: Convert load (pointer auth) insns " Peter Maydell
2023-06-19 14:29 ` [PULL 20/33] target/arm: Convert LDAPR/STLR (imm) " Peter Maydell
2023-06-19 14:29 ` [PULL 21/33] target/arm: Convert load/store (multiple structures) " Peter Maydell
2023-06-19 14:29 ` [PULL 22/33] target/arm: Convert load/store single structure " Peter Maydell
2023-06-19 14:29 ` [PULL 23/33] target/arm: Convert load/store tags insns " Peter Maydell
2023-06-19 14:29 ` [PULL 24/33] hw/intc/allwinner-a10-pic: Handle IRQ levels other than 0 or 1 Peter Maydell
2023-06-19 14:29 ` [PULL 25/33] hw/sd/allwinner-sdhost: Don't send non-boolean IRQ line levels Peter Maydell
2023-06-19 14:29 ` [PULL 26/33] hw/timer/nrf51_timer: Don't lose time when timer is queried in tight loop Peter Maydell
2023-06-19 14:29 ` [PULL 27/33] hw/arm/Kconfig: sbsa-ref uses Bochs display Peter Maydell
2023-06-19 14:29 ` [PULL 28/33] imx_serial: set wake bit when we receive a data byte Peter Maydell
2023-06-19 14:29 ` [PULL 29/33] docs: sbsa: document board to firmware interface Peter Maydell
2023-06-19 14:29 ` Peter Maydell [this message]
2023-06-19 14:29 ` [PULL 31/33] hw/misc/bcm2835_property: Use 'raspberrypi-fw-defs.h' definitions Peter Maydell
2023-06-19 14:29 ` [PULL 32/33] hw/misc/bcm2835_property: Replace magic frequency values by definitions Peter Maydell
2023-06-19 14:29 ` [PULL 33/33] hw/misc/bcm2835_property: Handle CORE_CLK_ID firmware property Peter Maydell
2023-06-19 16:58 ` [PULL 00/33] target-arm queue Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230619142914.963184-31-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.