All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
To: Mark Brown <broonie@kernel.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	Biju Das <biju.das@bp.renesas.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH 07/10] spi: rzv2m-csi: Switch to using {read,write}s{b,w}
Date: Sat, 15 Jul 2023 02:04:04 +0100	[thread overview]
Message-ID: <20230715010407.1751715-8-fabrizio.castro.jz@renesas.com> (raw)
In-Reply-To: <20230715010407.1751715-1-fabrizio.castro.jz@renesas.com>

The RX/TX FIFOs implemented by the CSI IP are accessed by
repeatedly reading/writing the same memory address, and
therefore they are the ideal candidate for {read,write}s{b,w}.
The RZ/V2M CSI driver currently implements loops to fill up
the TX FIFO and empty the RX FIFO, differentiating between
8-bit and 16-bit word size.
Switch to using {read,write}s{b,w} to get rid of the bespoke
loops.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
---
 drivers/spi/spi-rzv2m-csi.c | 42 +++++++++++++------------------------
 1 file changed, 14 insertions(+), 28 deletions(-)

diff --git a/drivers/spi/spi-rzv2m-csi.c b/drivers/spi/spi-rzv2m-csi.c
index faf5898bc3e0..d0d6b183ffaf 100644
--- a/drivers/spi/spi-rzv2m-csi.c
+++ b/drivers/spi/spi-rzv2m-csi.c
@@ -86,8 +86,8 @@ struct rzv2m_csi_priv {
 	struct clk *pclk;
 	struct device *dev;
 	struct spi_controller *controller;
-	const u8 *txbuf;
-	u8 *rxbuf;
+	const void *txbuf;
+	void *rxbuf;
 	int buffer_len;
 	int bytes_sent;
 	int bytes_received;
@@ -157,22 +157,15 @@ static int rzv2m_csi_start_stop_operation(const struct rzv2m_csi_priv *csi,
 
 static int rzv2m_csi_fill_txfifo(struct rzv2m_csi_priv *csi)
 {
-	int i;
-
 	if (readl(csi->base + CSI_OFIFOL))
 		return -EIO;
 
-	if (csi->bytes_per_word == 2) {
-		u16 *buf = (u16 *)csi->txbuf;
-
-		for (i = 0; i < csi->words_to_transfer; i++)
-			writel(buf[i], csi->base + CSI_OFIFO);
-	} else {
-		u8 *buf = (u8 *)csi->txbuf;
-
-		for (i = 0; i < csi->words_to_transfer; i++)
-			writel(buf[i], csi->base + CSI_OFIFO);
-	}
+	if (csi->bytes_per_word == 2)
+		writesw(csi->base + CSI_OFIFO, csi->txbuf,
+			csi->words_to_transfer);
+	else
+		writesb(csi->base + CSI_OFIFO, csi->txbuf,
+			csi->words_to_transfer);
 
 	csi->txbuf += csi->bytes_to_transfer;
 	csi->bytes_sent += csi->bytes_to_transfer;
@@ -182,22 +175,15 @@ static int rzv2m_csi_fill_txfifo(struct rzv2m_csi_priv *csi)
 
 static int rzv2m_csi_read_rxfifo(struct rzv2m_csi_priv *csi)
 {
-	int i;
-
 	if (readl(csi->base + CSI_IFIFOL) != csi->bytes_to_transfer)
 		return -EIO;
 
-	if (csi->bytes_per_word == 2) {
-		u16 *buf = (u16 *)csi->rxbuf;
-
-		for (i = 0; i < csi->words_to_transfer; i++)
-			buf[i] = (u16)readl(csi->base + CSI_IFIFO);
-	} else {
-		u8 *buf = (u8 *)csi->rxbuf;
-
-		for (i = 0; i < csi->words_to_transfer; i++)
-			buf[i] = (u8)readl(csi->base + CSI_IFIFO);
-	}
+	if (csi->bytes_per_word == 2)
+		readsw(csi->base + CSI_IFIFO, csi->rxbuf,
+		       csi->words_to_transfer);
+	else
+		readsb(csi->base + CSI_IFIFO, csi->rxbuf,
+		       csi->words_to_transfer);
 
 	csi->rxbuf += csi->bytes_to_transfer;
 	csi->bytes_received += csi->bytes_to_transfer;
-- 
2.34.1


  parent reply	other threads:[~2023-07-15  1:05 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-15  1:03 [PATCH 00/10] spi: rzv2m-csi: Code refactoring Fabrizio Castro
2023-07-15  1:03 ` [PATCH 01/10] spi: rzv2m-csi: Add missing include Fabrizio Castro
2023-07-15  1:03 ` [PATCH 02/10] spi: rzv2m-csi: Adopt HZ_PER_MHZ for max spi clock Fabrizio Castro
2023-07-17  9:24   ` Geert Uytterhoeven
2023-07-15  1:04 ` [PATCH 03/10] spi: rzv2m-csi: Rework CSI_CKS_MAX definition Fabrizio Castro
2023-07-17  9:27   ` Geert Uytterhoeven
2023-07-15  1:04 ` [PATCH 04/10] spi: rzv2m-csi: Leave readl_poll_timeout calls for last Fabrizio Castro
2023-07-17  9:29   ` Geert Uytterhoeven
2023-07-15  1:04 ` [PATCH 05/10] spi: rzv2m-csi: Replace unnecessary ternary operators Fabrizio Castro
2023-07-17  9:30   ` Geert Uytterhoeven
2023-07-15  1:04 ` [PATCH 06/10] spi: rzv2m-csi: Squash timing settings into one statement Fabrizio Castro
2023-07-15  7:54   ` Andy Shevchenko
2023-07-17 10:44     ` Fabrizio Castro
2023-07-17 11:15       ` Andy Shevchenko
2023-07-15  1:04 ` Fabrizio Castro [this message]
2023-07-17  9:37   ` [PATCH 07/10] spi: rzv2m-csi: Switch to using {read,write}s{b,w} Geert Uytterhoeven
2023-07-17 10:36     ` Fabrizio Castro
2023-07-17 11:18       ` Andy Shevchenko
2023-07-17 13:00         ` Fabrizio Castro
2023-07-17 16:31           ` Fabrizio Castro
2023-07-15  1:04 ` [PATCH 08/10] spi: rzv2m-csi: Improve data types and alignment Fabrizio Castro
2023-07-17  9:44   ` Geert Uytterhoeven
2023-07-15  1:04 ` [PATCH 09/10] spi: rzv2m-csi: Get rid of the x_trg{_words} tables Fabrizio Castro
2023-07-15  7:57   ` Andy Shevchenko
2023-07-17  9:49   ` Geert Uytterhoeven
2023-07-15  1:04 ` [PATCH 10/10] spi: rzv2m-csi: Make use of device_set_node Fabrizio Castro
2023-07-15  7:58   ` Andy Shevchenko
2023-07-17 15:05     ` Fabrizio Castro
2023-07-15  8:00 ` [PATCH 00/10] spi: rzv2m-csi: Code refactoring Andy Shevchenko
2023-07-18 18:46 ` (subset) " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230715010407.1751715-8-fabrizio.castro.jz@renesas.com \
    --to=fabrizio.castro.jz@renesas.com \
    --cc=Chris.Paterson2@renesas.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=biju.das@bp.renesas.com \
    --cc=broonie@kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.