From: Nikita Travkin <nikita@trvn.ru>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
Nikita Travkin <nikita@trvn.ru>
Subject: [PATCH 3/3] arm64: dts: qcom: msm8916-longcheer-l8150: Add battery and charger
Date: Sat, 16 Sep 2023 18:57:06 +0500 [thread overview]
Message-ID: <20230916-pm8916-dtsi-bms-lbc-v1-3-7db0b42f9fb1@trvn.ru> (raw)
In-Reply-To: <20230916-pm8916-dtsi-bms-lbc-v1-0-7db0b42f9fb1@trvn.ru>
Longcheer L8150 doesn't have any dedicated fuel-gauge or charger,
instead making use of the pmic hardware blocks for those purposes.
Add pm8916 bms and charger, as well as the battery cell description
that those devices rely on.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
---
.../boot/dts/qcom/msm8916-longcheer-l8150.dts | 43 +++++++++++++++++++---
1 file changed, 37 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 3892ad4f639a..95dddf3b3880 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -33,6 +33,25 @@ wcnss_mem: wcnss@8b600000 {
};
};
+ battery: battery {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3400000>;
+ voltage-max-design-microvolt = <4350000>;
+ energy-full-design-microwatt-hours = <9500000>;
+ charge-full-design-microamp-hours = <2500000>;
+
+ ocv-capacity-celsius = <25>;
+ ocv-capacity-table-0 = <4330000 100>, <4265000 95>,
+ <4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>,
+ <4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>,
+ <3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>,
+ <3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>,
+ <3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>,
+ <3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>,
+ <3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>,
+ <3000000 0>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
@@ -220,6 +239,22 @@ &blsp_uart2 {
status = "okay";
};
+&pm8916_bms {
+ status = "okay";
+
+ monitored-battery = <&battery>;
+ power-supplies = <&pm8916_charger>;
+};
+
+&pm8916_charger {
+ status = "okay";
+
+ monitored-battery = <&battery>;
+
+ qcom,fast-charge-safe-current = <900000>;
+ qcom,fast-charge-safe-voltage = <4300000>;
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
@@ -232,10 +267,6 @@ pm8916_l17: l17 {
};
};
-&pm8916_usbin {
- status = "okay";
-};
-
&pm8916_vib {
status = "okay";
};
@@ -252,11 +283,11 @@ &sdhc_2 {
&usb {
status = "okay";
dr_mode = "peripheral";
- extcon = <&pm8916_usbin>;
+ extcon = <&pm8916_charger>;
};
&usb_hs_phy {
- extcon = <&pm8916_usbin>;
+ extcon = <&pm8916_charger>;
};
&wcnss {
--
2.41.0
next prev parent reply other threads:[~2023-09-16 13:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-16 13:57 [PATCH 0/3] pm8916: Add BMS and charger Nikita Travkin
2023-09-16 13:57 ` [PATCH 1/3] dt-bindings: mfd: qcom,spmi-pmic: Add pm8916 vm-bms and lbc Nikita Travkin
2023-09-16 14:18 ` Rob Herring
2023-09-17 7:58 ` Krzysztof Kozlowski
2023-09-17 8:26 ` Nikita Travkin
2023-09-17 8:32 ` Krzysztof Kozlowski
2023-09-17 8:54 ` Nikita Travkin
2023-09-17 9:13 ` Krzysztof Kozlowski
2023-09-16 13:57 ` [PATCH 2/3] arm64: dts: qcom: pm8916: Add BMS and charger Nikita Travkin
2023-09-16 13:57 ` Nikita Travkin [this message]
2023-09-20 14:50 ` [PATCH 3/3] arm64: dts: qcom: msm8916-longcheer-l8150: Add battery " Konrad Dybcio
2023-09-20 15:01 ` Nikita Travkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230916-pm8916-dtsi-bms-lbc-v1-3-7db0b42f9fb1@trvn.ru \
--to=nikita@trvn.ru \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.