All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Lechner <dlechner@baylibre.com>
To: linux-iio@vger.kernel.org, linux-staging@lists.linux.dev
Cc: "David Lechner" <dlechner@baylibre.com>,
	"Jonathan Cameron" <jic23@kernel.org>,
	"Michael Hennerich" <Michael.Hennerich@analog.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Axel Haslam" <ahaslam@baylibre.com>,
	"Philip Molloy" <pmolloy@baylibre.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 05/17] staging: iio: resolver: ad2s1210: add phase lock range support
Date: Thu,  5 Oct 2023 19:50:22 -0500	[thread overview]
Message-ID: <20231005-ad2s1210-mainline-v4-5-ec00746840fc@baylibre.com> (raw)
In-Reply-To: <20231005-ad2s1210-mainline-v4-0-ec00746840fc@baylibre.com>

The AD2S1210 chip has a phase lock range feature that allows selecting
the allowable phase difference between the excitation output and the
sine and cosine inputs. This can be set to either 44 degrees (default)
or 360 degrees.

This patch adds a new phase channel with a phase0_mag_rising event that
can be used to configure the phase lock range. Actually emitting the
event will be added in a subsequent patch.

Signed-off-by: David Lechner <dlechner@baylibre.com>
---

v4 changes:
* Changed event direction from none to rising.
* Fixed missing static qualifier on attribute definition.

v3 changes:
* This is a new patch to replace "staging: iio: resolver: ad2s1210: add
 phase_lock_range attributes"


 drivers/staging/iio/resolver/ad2s1210.c | 125 ++++++++++++++++++++++++++++++++
 1 file changed, 125 insertions(+)

diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index 66ef35fbb6fe..83f6ac890dbc 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -56,6 +56,13 @@
 #define AD2S1210_MIN_FCW	0x4
 #define AD2S1210_MAX_FCW	0x50
 
+/* 44 degrees ~= 0.767945 radians */
+#define PHASE_44_DEG_TO_RAD_INT 0
+#define PHASE_44_DEG_TO_RAD_MICRO 767945
+/* 360 degrees ~= 6.283185 radians */
+#define PHASE_360_DEG_TO_RAD_INT 6
+#define PHASE_360_DEG_TO_RAD_MICRO 283185
+
 enum ad2s1210_mode {
 	MOD_POS = 0b00,
 	MOD_VEL = 0b01,
@@ -379,6 +386,54 @@ static int ad2s1210_set_hysteresis(struct ad2s1210_state *st, int val)
 	return ret;
 }
 
+static int ad2s1210_get_phase_lock_range(struct ad2s1210_state *st,
+					 int *val, int *val2)
+{
+	int ret;
+
+	mutex_lock(&st->lock);
+	ret = regmap_test_bits(st->regmap, AD2S1210_REG_CONTROL,
+			       AD2S1210_PHASE_LOCK_RANGE_44);
+	mutex_unlock(&st->lock);
+
+	if (ret < 0)
+		return ret;
+
+	if (ret) {
+		/* 44 degrees as radians */
+		*val = PHASE_44_DEG_TO_RAD_INT;
+		*val2 = PHASE_44_DEG_TO_RAD_MICRO;
+	} else {
+		/* 360 degrees as radians */
+		*val = PHASE_360_DEG_TO_RAD_INT;
+		*val2 = PHASE_360_DEG_TO_RAD_MICRO;
+	}
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int ad2s1210_set_phase_lock_range(struct ad2s1210_state *st,
+					 int val, int val2)
+{
+	int deg, ret;
+
+	/* convert radians to degrees - only two allowable values */
+	if (val == PHASE_44_DEG_TO_RAD_INT && val2 == PHASE_44_DEG_TO_RAD_MICRO)
+		deg = 44;
+	else if (val == PHASE_360_DEG_TO_RAD_INT &&
+		 val2 == PHASE_360_DEG_TO_RAD_MICRO)
+		deg = 360;
+	else
+		return -EINVAL;
+
+	mutex_lock(&st->lock);
+	ret = regmap_update_bits(st->regmap, AD2S1210_REG_CONTROL,
+				 AD2S1210_PHASE_LOCK_RANGE_44,
+				 deg == 44 ? AD2S1210_PHASE_LOCK_RANGE_44 : 0);
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
 static int ad2s1210_get_excitation_frequency(struct ad2s1210_state *st, int *val)
 {
 	unsigned int reg_val;
@@ -551,6 +606,16 @@ static IIO_DEVICE_ATTR(lot_low_thrd, 0644,
 		       ad2s1210_show_reg, ad2s1210_store_reg,
 		       AD2S1210_REG_LOT_LOW_THRD);
 
+static const struct iio_event_spec ad2s1210_phase_event_spec[] = {
+	{
+		/* Phase error fault. */
+		.type = IIO_EV_TYPE_MAG,
+		.dir = IIO_EV_DIR_RISING,
+		/* Phase lock range. */
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	},
+};
+
 static const struct iio_chan_spec ad2s1210_channels[] = {
 	{
 		.type = IIO_ANGL,
@@ -567,6 +632,14 @@ static const struct iio_chan_spec ad2s1210_channels[] = {
 		.channel = 0,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 				      BIT(IIO_CHAN_INFO_SCALE),
+	}, {
+		/* used to configure phase lock range and get phase lock error */
+		.type = IIO_PHASE,
+		.indexed = 1,
+		.channel = 0,
+		.scan_index = -1,
+		.event_spec = ad2s1210_phase_event_spec,
+		.num_event_specs = ARRAY_SIZE(ad2s1210_phase_event_spec),
 	}, {
 		/* excitation frequency output */
 		.type = IIO_ALTVOLTAGE,
@@ -595,6 +668,21 @@ static const struct attribute_group ad2s1210_attribute_group = {
 	.attrs = ad2s1210_attributes,
 };
 
+static IIO_CONST_ATTR(in_phase0_mag_rising_value_available,
+		      __stringify(PHASE_44_DEG_TO_RAD_INT) "."
+		      __stringify(PHASE_44_DEG_TO_RAD_MICRO) " "
+		      __stringify(PHASE_360_DEG_TO_RAD_INT) "."
+		      __stringify(PHASE_360_DEG_TO_RAD_MICRO));
+
+static struct attribute *ad2s1210_event_attributes[] = {
+	&iio_const_attr_in_phase0_mag_rising_value_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad2s1210_event_attribute_group = {
+	.attrs = ad2s1210_event_attributes,
+};
+
 static int ad2s1210_initial(struct ad2s1210_state *st)
 {
 	unsigned char data;
@@ -619,6 +707,40 @@ static int ad2s1210_initial(struct ad2s1210_state *st)
 	return ret;
 }
 
+static int ad2s1210_read_event_value(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir,
+				     enum iio_event_info info,
+				     int *val, int *val2)
+{
+	struct ad2s1210_state *st = iio_priv(indio_dev);
+
+	switch (chan->type) {
+	case IIO_PHASE:
+		return ad2s1210_get_phase_lock_range(st, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad2s1210_write_event_value(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir,
+				      enum iio_event_info info,
+				      int val, int val2)
+{
+	struct ad2s1210_state *st = iio_priv(indio_dev);
+
+	switch (chan->type) {
+	case IIO_PHASE:
+		return ad2s1210_set_phase_lock_range(st, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
 static int ad2s1210_debugfs_reg_access(struct iio_dev *indio_dev,
 				       unsigned int reg, unsigned int writeval,
 				       unsigned int *readval)
@@ -639,10 +761,13 @@ static int ad2s1210_debugfs_reg_access(struct iio_dev *indio_dev,
 }
 
 static const struct iio_info ad2s1210_info = {
+	.event_attrs = &ad2s1210_event_attribute_group,
 	.read_raw = ad2s1210_read_raw,
 	.read_avail = ad2s1210_read_avail,
 	.write_raw = ad2s1210_write_raw,
 	.attrs = &ad2s1210_attribute_group,
+	.read_event_value = ad2s1210_read_event_value,
+	.write_event_value = ad2s1210_write_event_value,
 	.debugfs_reg_access = &ad2s1210_debugfs_reg_access,
 };
 

-- 
2.42.0


  parent reply	other threads:[~2023-10-06  0:51 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-06  0:50 [PATCH v4 00/17] iio: resolver: move ad2s1210 out of staging David Lechner
2023-10-06  0:50 ` [PATCH v4 01/17] staging: iio: resolver: ad2s1210: do not use fault register for dummy read David Lechner
2023-10-10 15:38   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 02/17] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr David Lechner
2023-10-10 15:40   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 03/17] staging: iio: resolver: ad2s1210: convert fexcit to channel attribute David Lechner
2023-10-10 15:41   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 04/17] staging: iio: resolver: ad2s1210: convert resolution to devicetree property David Lechner
2023-10-10 15:43   ` Jonathan Cameron
2023-10-06  0:50 ` David Lechner [this message]
2023-10-10 15:46   ` [PATCH v4 05/17] staging: iio: resolver: ad2s1210: add phase lock range support Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 06/17] staging: iio: resolver: ad2s1210: add triggered buffer support David Lechner
2023-10-10 15:47   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 07/17] staging: iio: resolver: ad2s1210: convert LOT threshold attrs to event attrs David Lechner
2023-10-10 15:54   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 08/17] staging: iio: resolver: ad2s1210: convert LOS threshold to event attr David Lechner
2023-10-10 15:52   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 09/17] staging: iio: resolver: ad2s1210: convert DOS overrange " David Lechner
2023-10-10 15:55   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 10/17] staging: iio: resolver: ad2s1210: convert DOS mismatch " David Lechner
2023-10-10 15:56   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 11/17] staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs David Lechner
2023-10-10 15:57   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 12/17] iio: event: add optional event label support David Lechner
2023-10-10 15:59   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 13/17] staging: iio: resolver: ad2s1210: implement fault events David Lechner
2023-10-10 16:05   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 14/17] staging: iio: resolver: ad2s1210: add register/fault support summary David Lechner
2023-10-10 16:07   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 15/17] staging: iio: resolver: ad2s1210: add label attribute support David Lechner
2023-10-10 16:08   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 16/17] staging: iio: resolver: ad2s1210: remove fault attribute David Lechner
2023-10-10 16:09   ` Jonathan Cameron
2023-10-06  0:50 ` [PATCH v4 17/17] staging: iio: resolver: ad2s1210: simplify code with guard(mutex) David Lechner
2023-10-10 16:17   ` Jonathan Cameron
2023-10-10 17:40     ` David Lechner
2023-10-10 17:46       ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231005-ad2s1210-mainline-v4-5-ec00746840fc@baylibre.com \
    --to=dlechner@baylibre.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=ahaslam@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=nuno.sa@analog.com \
    --cc=pmolloy@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.