From: "Duje Mihanović" <duje.mihanovic@skole.hr>
To: "Michael Turquette" <mturquette@baylibre.com>,
"Stephen Boyd" <sboyd@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Tony Lindgren" <tony@atomide.com>,
"Duje Mihanović" <duje.mihanovic@skole.hr>,
"Daniel Mack" <daniel@zonque.org>,
"Haojian Zhuang" <haojian.zhuang@gmail.com>,
"Robert Jarzmik" <robert.jarzmik@free.fr>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Jaroslav Kysela" <perex@perex.cz>,
"Takashi Iwai" <tiwai@suse.com>, "Leo Yan" <leoy@marvell.com>,
"Zhangfei Gao" <zhangfei.gao@marvell.com>,
"Lubomir Rintel" <lkundrak@v3.sk>,
"Catalin Marinas" <catalin.marinas@arm.com>,
"Will Deacon" <will@kernel.org>,
"Kees Cook" <keescook@chromium.org>,
"Tony Luck" <tony.luck@intel.com>,
"Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
alsa-devel@alsa-project.org, linux-hardening@vger.kernel.org,
phone-devel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
Karel Balej <balejk@matfyz.cz>
Subject: [PATCH v7 05/10] clk: mmp: Add Marvell PXA1908 clock driver
Date: Thu, 02 Nov 2023 16:11:11 +0100 [thread overview]
Message-ID: <20231102-pxa1908-lkml-v7-5-cabb1a0cb52b@skole.hr> (raw)
In-Reply-To: <20231102-pxa1908-lkml-v7-0-cabb1a0cb52b@skole.hr>
Add driver for Marvell PXA1908 clock controller blocks. The SoC has
numerous clock controller blocks, currently supporting APBC, APBCP, MPMU
and APMU.
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-of-pxa1908.c | 328 +++++++++++++++++++++++++++++++++++++++
2 files changed, 329 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 441bf83080a1..69f9c3afde83 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -11,4 +11,4 @@ obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o pwr-island.o
obj-$(CONFIG_COMMON_CLK_MMP2_AUDIO) += clk-audio.o
-obj-y += clk-of-pxa1928.o
+obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-of-pxa1908.o
diff --git a/drivers/clk/mmp/clk-of-pxa1908.c b/drivers/clk/mmp/clk-of-pxa1908.c
new file mode 100644
index 000000000000..753dd031b147
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-pxa1908.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bits.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/units.h>
+
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+#include "clk.h"
+
+#define APMU_CLK_GATE_CTRL 0x40
+#define MPMU_UART_PLL 0x14
+
+#define APBC_UART0 0x0
+#define APBC_UART1 0x4
+#define APBC_GPIO 0x8
+#define APBC_PWM0 0xc
+#define APBC_PWM1 0x10
+#define APBC_PWM2 0x14
+#define APBC_PWM3 0x18
+#define APBC_SSP0 0x1c
+#define APBC_SSP1 0x20
+#define APBC_IPC_RST 0x24
+#define APBC_RTC 0x28
+#define APBC_TWSI0 0x2c
+#define APBC_KPC 0x30
+#define APBC_SWJTAG 0x40
+#define APBC_SSP2 0x4c
+#define APBC_TWSI1 0x60
+#define APBC_THERMAL 0x6c
+#define APBC_TWSI3 0x70
+
+#define APBCP_UART2 0x1c
+#define APBCP_TWSI2 0x28
+#define APBCP_AICER 0x38
+
+#define APMU_CCIC1 0x24
+#define APMU_ISP 0x38
+#define APMU_DSI1 0x44
+#define APMU_DISP1 0x4c
+#define APMU_CCIC0 0x50
+#define APMU_SDH0 0x54
+#define APMU_SDH1 0x58
+#define APMU_USB 0x5c
+#define APMU_NF 0x60
+#define APMU_VPU 0xa4
+#define APMU_GC 0xcc
+#define APMU_SDH2 0xe0
+#define APMU_GC2D 0xf4
+#define APMU_TRACE 0x108
+#define APMU_DVC_DFC_DEBUG 0x140
+
+#define MPMU_NR_CLKS 39
+#define APBC_NR_CLKS 19
+#define APBCP_NR_CLKS 4
+#define APMU_NR_CLKS 17
+
+struct pxa1908_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *mpmu_base;
+ void __iomem *apmu_base;
+ void __iomem *apbc_base;
+ void __iomem *apbcp_base;
+ void __iomem *apbs_base;
+ void __iomem *ciu_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+ {PXA1908_CLK_CLK32, "clk32", NULL, 0, 32768},
+ {PXA1908_CLK_VCTCXO, "vctcxo", NULL, 0, 26 * HZ_PER_MHZ},
+ {PXA1908_CLK_PLL1_624, "pll1_624", NULL, 0, 624 * HZ_PER_MHZ},
+ {PXA1908_CLK_PLL1_416, "pll1_416", NULL, 0, 416 * HZ_PER_MHZ},
+ {PXA1908_CLK_PLL1_499, "pll1_499", NULL, 0, 499 * HZ_PER_MHZ},
+ {PXA1908_CLK_PLL1_832, "pll1_832", NULL, 0, 832 * HZ_PER_MHZ},
+ {PXA1908_CLK_PLL1_1248, "pll1_1248", NULL, 0, 1248 * HZ_PER_MHZ},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+ {PXA1908_CLK_PLL1_D2, "pll1_d2", "pll1_624", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D4, "pll1_d4", "pll1_d2", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D6, "pll1_d6", "pll1_d2", 1, 3, 0},
+ {PXA1908_CLK_PLL1_D8, "pll1_d8", "pll1_d4", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D12, "pll1_d12", "pll1_d6", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D13, "pll1_d13", "pll1_624", 1, 13, 0},
+ {PXA1908_CLK_PLL1_D16, "pll1_d16", "pll1_d8", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D24, "pll1_d24", "pll1_d12", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D48, "pll1_d48", "pll1_d24", 1, 2, 0},
+ {PXA1908_CLK_PLL1_D96, "pll1_d96", "pll1_d48", 1, 2, 0},
+ {PXA1908_CLK_PLL1_32, "pll1_32", "pll1_d13", 2, 3, 0},
+ {PXA1908_CLK_PLL1_208, "pll1_208", "pll1_d2", 2, 3, 0},
+ {PXA1908_CLK_PLL1_117, "pll1_117", "pll1_624", 3, 16, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+ .factor = 2,
+ .num_mask = GENMASK(12, 0),
+ .den_mask = GENMASK(12, 0),
+ .num_shift = 16,
+ .den_shift = 0,
+};
+
+static struct u32_fract uart_factor_tbl[] = {
+ {.numerator = 8125, .denominator = 1536}, /* 14.745MHz */
+};
+
+static DEFINE_SPINLOCK(pll1_lock);
+static struct mmp_param_general_gate_clk pll1_gate_clks[] = {
+ {PXA1908_CLK_PLL1_D2_GATE, "pll1_d2_gate", "pll1_d2", 0, APMU_CLK_GATE_CTRL, 29, 0, &pll1_lock},
+ {PXA1908_CLK_PLL1_416_GATE, "pll1_416_gate", "pll1_416", 0, APMU_CLK_GATE_CTRL, 27, 0, &pll1_lock},
+ {PXA1908_CLK_PLL1_624_GATE, "pll1_624_gate", "pll1_624", 0, APMU_CLK_GATE_CTRL, 26, 0, &pll1_lock},
+ {PXA1908_CLK_PLL1_832_GATE, "pll1_832_gate", "pll1_832", 0, APMU_CLK_GATE_CTRL, 30, 0, &pll1_lock},
+ {PXA1908_CLK_PLL1_1248_GATE, "pll1_1248_gate", "pll1_1248", 0, APMU_CLK_GATE_CTRL, 28, 0, &pll1_lock},
+};
+
+static void pxa1908_pll_init(struct pxa1908_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+ ARRAY_SIZE(fixed_rate_clks));
+
+ mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ mmp_clk_register_factor("uart_pll", "pll1_d4",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->mpmu_base + MPMU_UART_PLL,
+ &uart_factor_masks, uart_factor_tbl,
+ ARRAY_SIZE(uart_factor_tbl), NULL);
+
+}
+
+static DEFINE_SPINLOCK(pwm0_lock);
+static DEFINE_SPINLOCK(pwm2_lock);
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+
+static const char * const uart_parent_names[] = {"pll1_117", "uart_pll"};
+static const char * const ssp_parent_names[] = {"pll1_d16", "pll1_d48", "pll1_d24", "pll1_d12"};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+ {PXA1908_CLK_TWSI0, "twsi0_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x7, 3, 0, 0, NULL},
+ {PXA1908_CLK_TWSI1, "twsi1_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x7, 3, 0, 0, NULL},
+ {PXA1908_CLK_TWSI3, "twsi3_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI3, 0x7, 3, 0, 0, NULL},
+ {PXA1908_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x7, 3, 0, 0, NULL},
+ {PXA1908_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x7, 3, 0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA1908_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x87, 0x83, 0, MMP_CLK_GATE_NEED_DELAY, NULL},
+ {PXA1908_CLK_PWM0, "pwm0_clk", "pwm01_apb_share", CLK_SET_RATE_PARENT, APBC_PWM0, 0x2, 2, 0, 0, &pwm0_lock},
+ {PXA1908_CLK_PWM1, "pwm1_clk", "pwm01_apb_share", CLK_SET_RATE_PARENT, APBC_PWM1, 0x6, 2, 0, 0, NULL},
+ {PXA1908_CLK_PWM2, "pwm2_clk", "pwm23_apb_share", CLK_SET_RATE_PARENT, APBC_PWM2, 0x2, 2, 0, 0, NULL},
+ {PXA1908_CLK_PWM3, "pwm3_clk", "pwm23_apb_share", CLK_SET_RATE_PARENT, APBC_PWM3, 0x6, 2, 0, 0, NULL},
+ {PXA1908_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x7, 3, 0, 0, &uart0_lock},
+ {PXA1908_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x7, 3, 0, 0, &uart1_lock},
+};
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+ {0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+ {0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+ {0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), 0, APBC_SSP0, 4, 3, 0, NULL},
+ {0, "ssp2_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), 0, APBC_SSP2, 4, 3, 0, NULL},
+};
+
+static void pxa1908_apb_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_clk_register_gate(NULL, "pwm01_apb_share", "pll1_d48",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->apbc_base + APBC_PWM0,
+ 0x5, 1, 0, 0, &pwm0_lock);
+ mmp_clk_register_gate(NULL, "pwm23_apb_share", "pll1_d48",
+ CLK_SET_RATE_PARENT,
+ pxa_unit->apbc_base + APBC_PWM2,
+ 0x5, 1, 0, 0, &pwm2_lock);
+ mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_mux_clks));
+ mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+ ARRAY_SIZE(apbc_gate_clks));
+}
+
+static struct mmp_param_gate_clk apbcp_gate_clks[] = {
+ {PXA1908_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBCP_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
+ {PXA1908_CLK_TWSI2, "twsi2_clk", "pll1_32", CLK_SET_RATE_PARENT, APBCP_TWSI2, 0x7, 0x3, 0x0, 0, NULL},
+ {PXA1908_CLK_AICER, "ripc_clk", NULL, 0, APBCP_AICER, 0x7, 0x2, 0x0, 0, NULL},
+};
+
+static struct mmp_param_mux_clk apbcp_mux_clks[] = {
+ {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBCP_UART2, 4, 3, 0, &uart2_lock},
+};
+
+static void pxa1908_apb_p_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apbcp_mux_clks, pxa_unit->apbcp_base,
+ ARRAY_SIZE(apbcp_mux_clks));
+ mmp_register_gate_clks(unit, apbcp_gate_clks, pxa_unit->apbcp_base,
+ ARRAY_SIZE(apbcp_gate_clks));
+}
+
+static DEFINE_SPINLOCK(sdh0_lock);
+static DEFINE_SPINLOCK(sdh1_lock);
+static DEFINE_SPINLOCK(sdh2_lock);
+
+static const char * const sdh_parent_names[] = {"pll1_416", "pll1_624"};
+
+static struct mmp_clk_mix_config sdh_mix_config = {
+ .reg_info = DEFINE_MIX_REG_INFO(3, 8, 2, 6, 11),
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+ {PXA1908_CLK_USB, "usb_clk", NULL, 0, APMU_USB, 0x9, 0x9, 0x1, 0, NULL},
+ {PXA1908_CLK_SDH0, "sdh0_clk", "sdh0_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH0, 0x12, 0x12, 0x0, 0, &sdh0_lock},
+ {PXA1908_CLK_SDH1, "sdh1_clk", "sdh1_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH1, 0x12, 0x12, 0x0, 0, &sdh1_lock},
+ {PXA1908_CLK_SDH2, "sdh2_clk", "sdh2_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH2, 0x12, 0x12, 0x0, 0, &sdh2_lock}
+};
+
+static void pxa1908_axi_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_general_gate_clks(unit, pll1_gate_clks,
+ pxa_unit->apmu_base, ARRAY_SIZE(pll1_gate_clks));
+
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH0;
+ mmp_clk_register_mix(NULL, "sdh0_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh0_lock);
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH1;
+ mmp_clk_register_mix(NULL, "sdh1_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh1_lock);
+ sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH2;
+ mmp_clk_register_mix(NULL, "sdh2_mix_clk", sdh_parent_names,
+ ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+ &sdh_mix_config, &sdh2_lock);
+
+ mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+ ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void __init pxa1908_apbc_clk_init(struct device_node *np)
+{
+ struct pxa1908_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->apbc_base = of_iomap(np, 0);
+ if (!pxa_unit->apbc_base) {
+ pr_err("failed to map apbc registers\n");
+ kfree(pxa_unit);
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, APBC_NR_CLKS);
+
+ pxa1908_apb_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_apbc, "marvell,pxa1908-apbc", pxa1908_apbc_clk_init);
+
+static void __init pxa1908_apbcp_clk_init(struct device_node *np)
+{
+ struct pxa1908_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->apbcp_base = of_iomap(np, 0);
+ if (!pxa_unit->apbcp_base) {
+ pr_err("failed to map apbcp registers\n");
+ kfree(pxa_unit);
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, APBCP_NR_CLKS);
+
+ pxa1908_apb_p_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_apbcp, "marvell,pxa1908-apbcp", pxa1908_apbcp_clk_init);
+
+static void __init pxa1908_mpmu_clk_init(struct device_node *np)
+{
+ struct pxa1908_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->mpmu_base = of_iomap(np, 0);
+ if (!pxa_unit->mpmu_base) {
+ pr_err("failed to map mpmu registers\n");
+ kfree(pxa_unit);
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, MPMU_NR_CLKS);
+
+ pxa1908_pll_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_mpmu, "marvell,pxa1908-mpmu", pxa1908_mpmu_clk_init);
+
+static void __init pxa1908_apmu_clk_init(struct device_node *np)
+{
+ struct pxa1908_clk_unit *pxa_unit;
+
+ pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+ if (!pxa_unit)
+ return;
+
+ pxa_unit->apmu_base = of_iomap(np, 0);
+ if (!pxa_unit->apmu_base) {
+ pr_err("failed to map apmu registers\n");
+ kfree(pxa_unit);
+ return;
+ }
+
+ mmp_clk_init(np, &pxa_unit->unit, APMU_NR_CLKS);
+
+ pxa1908_axi_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_apmu, "marvell,pxa1908-apmu", pxa1908_apmu_clk_init);
--
2.42.0
prev parent reply other threads:[~2023-11-02 15:12 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-02 15:11 [PATCH v7 00/10] Initial Marvell PXA1908 support Duje Mihanović
2023-11-02 15:11 ` Duje Mihanović
2023-11-02 15:11 ` [PATCH v7 01/10] clk: mmp: Switch to use struct u32_fract instead of custom one Duje Mihanović
2023-11-02 15:11 ` Duje Mihanović
2023-11-02 15:11 ` [PATCH v7 02/10] dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible Duje Mihanović
2023-11-02 15:11 ` Duje Mihanović
2023-11-02 15:11 ` [PATCH v7 03/10] pinctrl: single: " Duje Mihanović
2023-11-02 15:11 ` Duje Mihanović
2023-11-02 15:11 ` [PATCH v7 04/10] dt-bindings: clock: Add Marvell PXA1908 clock bindings Duje Mihanović
2023-11-02 15:11 ` Duje Mihanović
2023-11-02 15:11 ` Duje Mihanović [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231102-pxa1908-lkml-v7-5-cabb1a0cb52b@skole.hr \
--to=duje.mihanovic@skole.hr \
--cc=alsa-devel@alsa-project.org \
--cc=balejk@matfyz.cz \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=daniel@zonque.org \
--cc=devicetree@vger.kernel.org \
--cc=gpiccoli@igalia.com \
--cc=haojian.zhuang@gmail.com \
--cc=keescook@chromium.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoy@marvell.com \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=lkundrak@v3.sk \
--cc=mturquette@baylibre.com \
--cc=perex@perex.cz \
--cc=phone-devel@vger.kernel.org \
--cc=robert.jarzmik@free.fr \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tiwai@suse.com \
--cc=tony.luck@intel.com \
--cc=tony@atomide.com \
--cc=will@kernel.org \
--cc=zhangfei.gao@marvell.com \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.