From: Nia Espera <nespera@igalia.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Kees Cook <keescook@chromium.org>,
Tony Luck <tony.luck@intel.com>,
"Guilherme G. Piccoli" <gpiccoli@igalia.com>,
Vinod Koul <vkoul@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, phone-devel@vger.kernel.org,
Rob <Me@orbit.sh>, Clayton Craft <clayton@igalia.com>,
Caleb Connolly <caleb.connolly@linaro.org>,
Luca Weiss <luca.weiss@fairphone.com>,
~postmarketos/upstreaming@lists.sr.ht,
Nia Espera <nespera@igalia.com>
Subject: [PATCH v3 6/6] arm64: dts: qcom: sm8350-lemonade(p): New devices
Date: Wed, 08 Nov 2023 18:50:30 +0100 [thread overview]
Message-ID: <20231108-nia-sm8350-for-upstream-v3-6-18a024b5c74c@igalia.com> (raw)
In-Reply-To: <20231108-nia-sm8350-for-upstream-v3-0-18a024b5c74c@igalia.com>
Device tree files for OnePlus 9 and 9 Pro. Details of supported features
mentioned in the cover letter for this patch series, but for
accessibility also repeated here:
- USB OTG
- UFS
- Framebuffer display
- Touchscreen (for lemonade)
- Power & volume down keys
- Battery reading
- Modem, IPA, and remoteproc bringup
Steps to get booting:
- Wipe dtbo partition
- Flash vbmeta with disabled verity bit
- Flash kernel and initfs to boot partition with CLI args pd_ignore_unused
and clk_ignore_unused as v1 bootimg
- Flash rootfs to some other partition (probably super or userdata)
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Nia Espera <nespera@igalia.com>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi | 1088 ++++++++++++++++++++
.../boot/dts/qcom/sm8350-oneplus-lemonade.dts | 85 ++
.../boot/dts/qcom/sm8350-oneplus-lemonadep.dts | 20 +
4 files changed, 1195 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 2cca20563a1d..369ad4721b29 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -211,6 +211,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonade.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonadep.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
new file mode 100644
index 000000000000..dd560035d2b5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
@@ -0,0 +1,1088 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ * Nia Espera <nespera@igalia.com>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
+#define SMB139x_1_SID 0x0b
+#define SMB139x_2_SID 0x0c
+#include <dt-bindings/iio/qcom,spmi-adc7-smb139x.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+ chassis-type = "handset";
+ interrupt-parent = <&intc>;
+
+ bat: battery {
+ compatible = "simple-battery";
+ device-chemistry = "lithium-ion";
+ voltage-min-design-microvolt = <3200000>;
+ energy-full-design-microwatt-hours = <15840000>;
+ charge-full-design-microamp-hours = <2225000>;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@e4d00000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0xe4d00000 0 0x2400000>;
+ width = <1080>;
+ height = <2412>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ /*
+ * That's (going to be) a lot of clocks, but it's
+ * necessary due to unused clk cleanup & no panel
+ * driver yet.
+ */
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>;
+ };
+ };
+
+ display_panel_avdd: display-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "display_panel_avdd";
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+ regulator-enable-ramp-delay = <233>;
+
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vol_down_n>;
+
+ key-vol-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pmk8350_gpios 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+
+ /* USB3 not working, so no port@1 */
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_sbu: endpoint {
+ remote-endpoint = <&fsa4480_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&adsp {
+ firmware-name = "qcom/sm8350/lemonade/adsp.mbn";
+ status = "okay";
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+
+ vdd-l1-l4-supply = <&pm8350_s11>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-l5-supply = <&vreg_bob>;
+ vdd-l6-l9-l10-supply = <&pm8350_s11>;
+ vdd-l8-supply = <&pmr735a_s2>;
+
+ /*
+ * ARC regulators:
+ * S5 - mx.lvl
+ * S6 - gfx.lvl
+ * S9 - mxc.lvl
+ */
+
+ pm8350_s10: smps10 {
+ regulator-name = "pm8350_s10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_s11: smps11 {
+ regulator-name = "pm8350_s11";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <1012000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_s12: smps12 {
+ regulator-name = "pm8350_s12";
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l1: ldo1 {
+ regulator-name = "pm8350_l1";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l2: ldo2 {
+ regulator-name = "pm8350_l2";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l3: ldo3 {
+ regulator-name = "pm8350_l3";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L4 - lmx.lvl (ARC) */
+
+ pm8350_l5: ldo5 {
+ regulator-name = "pm8350_l5";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <888000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l6: ldo6 {
+ regulator-name = "pm8350_l6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1208000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l7: ldo7 {
+ regulator-name = "pm8350_l7";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L8 - lcx.lvl (ARC) */
+
+ pm8350_l9: ldo9 {
+ regulator-name = "pm8350_l9";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l12-supply = <&pm8350c_s1>;
+ vdd-l2-l8-supply = <&pm8350c_s1>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+ vdd-l10-supply = <&pm8350_s12>;
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ pm8350c_s1: smps1 {
+ regulator-name = "pm8350c_s1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* S2 - ebi.lvl (ARC) */
+
+ pm8350c_s3: smps3 {
+ regulator-name = "pm8350c_s3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /*
+ * ARC regulators:
+ * S4 - mss.lvl
+ * S6 - cx.lvl
+ * S8 - mmcx.lvl
+ */
+
+ pm8350c_s10: smps10 {
+ regulator-name = "pm8350c_s10";
+ regulator-min-microvolt = <1048000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l1: ldo1 {
+ regulator-name = "pm8350c_l1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l2: ldo2 {
+ regulator-name = "pm8350c_l2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l3: ldo3 {
+ regulator-name = "pm8350c_l3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l4: ldo4 {
+ regulator-name = "pm8350c_l4";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l5: ldo5 {
+ regulator-name = "pm8350c_l5";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l6: ldo6 {
+ regulator-name = "pm8350c_l6";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l7: ldo7 {
+ regulator-name = "pm8350c_l7";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l8: ldo8 {
+ regulator-name = "pm8350c_l8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l9: ldo9 {
+ regulator-name = "pm8350c_l9";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l10: ldo10 {
+ regulator-name = "pm8350c_l10";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l11: ldo11 {
+ regulator-name = "pm8350c_l11";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l12: ldo12 {
+ regulator-name = "pm8350c_l12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l13: ldo13 {
+ regulator-name = "pm8350c_l13";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3400000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+ };
+
+ /* pm8350b has one regulator here; unused for now */
+
+ regulators-2 {
+ compatible = "qcom,pmr735a-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+
+ vdd-l1-l2-supply = <&pmr735a_s2>;
+ vdd-l3-supply = <&pmr735a_s1>;
+ vdd-l4-supply = <&pm8350c_s1>;
+ vdd-l5-l6-supply = <&pm8350c_s1>;
+ vdd-l7-bob-supply = <&vreg_bob>;
+
+ pmr735a_s1: smps1 {
+ regulator-name = "pmr735a_s1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1280000>;
+ };
+
+ pmr735a_s2: smps2 {
+ regulator-name = "pmr735a_s2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <976000>;
+ };
+
+ pmr735a_s3: smps3 {
+ regulator-name = "pmr735a_s3";
+ regulator-min-microvolt = <2208000>;
+ regulator-max-microvolt = <2352000>;
+ };
+
+ pmr735a_l1: ldo1 {
+ regulator-name = "pmr735a_l1";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ };
+
+ pmr735a_l2: ldo2 {
+ regulator-name = "pmr735a_l2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pmr735a_l3: ldo3 {
+ regulator-name = "pmr735a_l3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pmr735a_l4: ldo4 {
+ regulator-name = "pmr735a_l4";
+ regulator-min-microvolt = <1776000>;
+ regulator-max-microvolt = <1872000>;
+ };
+
+ pmr735a_l5: ldo5 {
+ regulator-name = "pmr735a_l5";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ pmr735a_l6: ldo6 {
+ regulator-name = "pmr735a_l6";
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <904000>;
+ };
+
+ pmr735a_l7: ldo7 {
+ regulator-name = "pmr735a_l7";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+};
+
+&cdsp {
+ firmware-name = "qcom/sm8350/lemonade/cdsp.mbn";
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ status = "okay";
+
+ bq27541: fuel-gauge@55 {
+ compatible = "ti,bq27541";
+ reg = <0x55>;
+ monitored-battery = <&bat>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ /* Touchscreens: Syna TCM oncell or Samsung s6sy761 */
+};
+
+&i2c13 {
+ clock-frequency = <100000>;
+ status = "okay";
+
+ typec-mux@42 {
+ compatible = "fcs,fsa4480";
+ reg = <0x42>;
+
+ interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc-supply = <&vreg_bob>;
+ mode-switch;
+ orientation-switch;
+
+ port {
+ fsa4480_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_sbu>;
+ };
+ };
+ };
+
+ /* Qualcomm PM8008i/PM8008j @ 8, 9, c, d */
+};
+
+&i2c15 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ /* sn-nci NFC controller @ 28 */
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
+&ipa {
+ qcom,gsi-loader = "self";
+ memory-region = <&pil_ipa_fw_mem>;
+ firmware-name = "qcom/sm8350/lemonade/ipa_fws.mbn";
+ status = "okay";
+};
+
+&mpss {
+ firmware-name = "qcom/sm8350/lemonade/modem.mbn";
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_default_state>;
+
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&pm8350_l5>;
+ vdda-pll-supply = <&pm8350_l6>;
+
+ status = "okay";
+};
+
+&pm8350_gpios {
+ gpio1_adc_default: gpio1-adc-default-state {
+ pins = "gpio1";
+ function = "normal";
+ bias-high-impedance;
+ bias-disable;
+ };
+
+ gpio3_adc_default: gpio3-adc-default-state {
+ pins = "gpio3";
+ function = "normal";
+ bias-high-impedance;
+ bias-disable;
+ };
+};
+
+&pm8350_gpios {
+ vol_down_n: vol-down-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pmk8350_adc_tm {
+ status = "okay";
+
+ pm8350-msm-therm@0 {
+ reg = <0>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pm8350-cam-flash-therm@1 {
+ reg = <1>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pm8350-hot-pocket-therm@2 {
+ reg = <2>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pm8350-wide-rfc-therm@3 {
+ reg = <3>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pm8350-rear-tof-therm@4 {
+ reg = <4>;
+ io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pm8350b-usb-conn-therm@5 {
+ reg = <5>;
+ io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pm8350b-wl-chg-therm@6 {
+ reg = <6>;
+ io-channels = <&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pmk8350_rtc {
+ status = "okay";
+};
+
+&pmk8350_vadc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio1_adc_default>, <&gpio3_adc_default>;
+
+ /* pmk8350-ref-gnd */
+ channel@0 {
+ reg = <0x00>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmk8350_ref_gnd";
+ };
+
+ /* pmk8350-vref-1p25 */
+ channel@1 {
+ reg = <0x01>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmk8350_vref_1p25";
+ };
+
+ /* pmk8350-die-temp */
+ channel@3 {
+ reg = <0x03>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmk8350_die_temp";
+ };
+
+ /* pm8350-ref-gnd */
+ channel@100 {
+ reg = <0x100>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350_ref_gnd";
+ };
+
+ /*pm8350-vref-1p25*/
+ channel@101 {
+ reg = <0x101>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350_vref_1p25";
+ };
+
+ /* pm8350-die-temp */
+ channel@103 {
+ reg = <0x103>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350_die_temp";
+ };
+
+ /* gpio1-v */
+ channel@128 {
+ reg = <0x128>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <700>;
+ qcom,pre-scaling = <1 1>;
+ label = "gpio1_v";
+ };
+
+ /* gpio3-v */
+ channel@12b {
+ reg = <0x12b>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <700>;
+ qcom,pre-scaling = <1 1>;
+ label = "gpio3_v";
+ };
+
+ /* pm8350-msm-therm */
+ channel@144 {
+ reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350_msm_therm";
+ };
+
+ /* pm8350-cam-flash-therm */
+ channel@145 {
+ reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350_cam_flash_therm";
+ };
+
+ /* pm8350-hot-pocket-therm */
+ channel@146 {
+ reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350_hot_pocket_therm";
+ };
+
+ /* pm8350-wide-rfc-therm */
+ channel@147 {
+ reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350_wide_rfc_therm";
+ };
+
+ /* pm8350-rear-tof-therm */
+ channel@148 {
+ reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350_rear_tof_therm";
+ };
+
+ /* pm8350-vph-pwr */
+ channel@18e {
+ reg = <0x18e>;
+ qcom,pre-scaling = <1 3>;
+ label = "pm8350_vph_pwr";
+ };
+
+ /* pm8350b-ref-gnd */
+ channel@300 {
+ reg = <0x300>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350b_ref_gnd";
+ };
+
+ /* pm8350b-vref-1p25 */
+ channel@301 {
+ reg = <0x301>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350b_vref_1p25";
+ };
+
+ /* pm8350b-die-temp */
+ channel@303 {
+ reg = <0x303>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350b_die_temp";
+ };
+
+ /* pm8350b-chg-temp */
+ channel@310 {
+ reg = <PM8350B_ADC7_CHG_TEMP>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350b_chg_temp";
+ };
+
+ /* pm8350b-usb-conn-therm */
+ channel@347 {
+ reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350b_usb_conn_therm";
+ };
+
+ /* pm8350b-wl-chg-therm */
+ channel@34b {
+ reg = <PM8350B_ADC7_GPIO2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm8350b_wl_chg_therm";
+ };
+
+ /* pm8350b-vph-pwr */
+ channel@38e {
+ reg = <0x38e>;
+ qcom,pre-scaling = <1 3>;
+ label = "pm8350b_vph_pwr";
+ };
+
+ /* pm8350b-vbat-sns */
+ channel@38f {
+ reg = <0x38f>;
+ qcom,pre-scaling = <1 3>;
+ label = "pm8350b_vbat_sns";
+ };
+
+ /* pmr735a-ref-gnd */
+ channel@400 {
+ reg = <0x400>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmr735a_ref_gnd";
+ };
+
+ /* pmr735a-vref-1p25 */
+ channel@401 {
+ reg = <0x401>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmr735a_vref_1p25";
+ };
+
+ /* pmr735a-die-temp */
+ channel@403 {
+ reg = <0x403>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmr735a_die_temp";
+ };
+
+ /* pmr735b-ref-gnd */
+ channel@500 {
+ reg = <0x500>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmr735b_ref_gnd";
+ };
+
+ /* pmr735b-vref-1p25 */
+ channel@501 {
+ reg = <0x501>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmr735b_vref_1p25";
+ };
+
+ /* pmr735b-die-temp */
+ channel@503 {
+ reg = <0x503>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmr735b_die_temp";
+ };
+
+ /* smb139x-1-smb-temp */
+ channel@b06 {
+ reg = <SMB139x_1_ADC7_SMB_TEMP>;
+ qcom,pre-scaling = <1 1>;
+ label = "smb139x_1_smb_temp";
+ };
+
+ /* smb139x-2-smb-temp */
+ channel@c06 {
+ reg = <SMB139x_2_ADC7_SMB_TEMP>;
+ qcom,pre-scaling = <1 1>;
+ label = "smb139x_2_smb_temp";
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEUP>;
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+&reserved_memory {
+ bootloader-log@9fff7000 {
+ reg = <0 0x9fff7000 0 0x8000>;
+ };
+
+ framebuffer@e1000000 {
+ reg = <0 0xe4d00000 0 0x2400000>;
+ no-map;
+ };
+
+ ramoops: ramoops@E9700000 {
+ compatible = "ramoops";
+ reg = <0 0xe9700000 0 0x5b8000>;
+ record-size = <0x40000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x200000>;
+ pmsg-size = <0x200000>;
+ ecc-size = <0>;
+ };
+
+ reserved@ea700000 {
+ reg = <0 0xea700000 0 0x800000>;
+ };
+};
+
+&removed_mem {
+ reg = <0 0xd8800000 0 0x8e00000>;
+};
+
+&slpi {
+ firmware-name = "qcom/sm8350/lemonade/slpi.mbn";
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <52 8>;
+
+ pcie0_default_state: pcie0-default-state {
+ perst-pins {
+ pins = "gpio94";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio95";
+ function = "pcie0_clkreqn";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio96";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ sleep-pins {
+ pins = "gpio95";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default-state {
+ perst-pins {
+ pins = "gpio97";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio98";
+ function = "pcie1_clkreqn";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio99";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ /* wil6210_refclk_en_pin lives here also */
+ };
+ };
+
+ /* Modem-related pin common on both devices */
+ rf_cable_ant0_active: rf-cable-ant0-active-state {
+ pins = "gpio165";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tp_rst_active: tp-rst-active-state {
+ pins = "gpio22";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ /* tp_rst_suspend pinctrl is different per device, don't specify here */
+
+ tp_irq_active: tp-irq-active-state {
+ pins = "gpio23";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ tp_irq_suspend: tp-irq-suspend-state {
+ pins = "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&pm8350_l7>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&pm8350_l9>;
+ vccq-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&pm8350_l5>;
+ vdda-pll-supply = <&pm8350_l6>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ /*
+ * Bug in interconnect driver breaks USB; RPMh is unable to power on
+ * USB regulators without this.
+ */
+ /delete-property/ interconnects;
+ /delete-property/ interconnect-names;
+
+ /* USB3 seems broken (though it's enabled downstream?) */
+ qcom,select-utmi-as-pipe-clk;
+
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "otg";
+ maximum-speed = "high-speed";
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&pm8350_l5>;
+ vdda18-supply = <&pm8350c_l1>;
+ vdda33-supply = <&pm8350_l2>;
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts
new file mode 100644
index 000000000000..473f10d4fcf0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ * Nia Espera <nespera@igalia.com>
+ */
+
+/dts-v1/;
+
+#include "sm8350-oneplus-common.dtsi"
+
+/ {
+ compatible = "oneplus,lemonade", "qcom,sm8350";
+ model = "OnePlus 9";
+};
+
+&i2c4 {
+ touchscreen@48 {
+ compatible = "samsung,s6sy761";
+ reg = <0x48>;
+ interrupts-extended = <&tlmm 23 IRQ_TYPE_LEVEL_LOW>;
+
+ avdd-supply = <&pm8350c_l13>;
+ vdd-supply = <&pm8350c_l8>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&tp_rst_active>, <&tp_irq_active>, <&tp_enable_2v8>;
+ pinctrl-1 = <&tp_rst_suspend>, <&tp_irq_suspend>;
+ };
+};
+
+&mpss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rf_cable_ant0_active>,
+ <&rf_cable_ant1_active>,
+ <&rf_cable_ant2_active>,
+ <&rf_cable_ant3_active>,
+ <&rf_cable_ant7_active>;
+};
+
+&tlmm {
+ /* Modem antenna pins exclusive to lemonade */
+ rf_cable_ant1_active: rf-cable-ant1-active-state {
+ pins = "gpio27";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ rf_cable_ant2_active: rf-cable-ant2-active-state {
+ pins = "gpio92";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ rf_cable_ant3_active: rf-cable-ant3-active-state {
+ pins = "gpio44";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ rf_cable_ant7_active: rf-cable-ant7-active-state {
+ pins = "gpio155";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tp_rst_suspend: tp-rst-suspend-state {
+ pins = "gpio22";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ tp_enable_2v8: tp-enable-2v8-state {
+ pins = "gpio74";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ output-high;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts
new file mode 100644
index 000000000000..bc7e5654bd3d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ * Nia Espera <nespera@igalia.com>
+ */
+
+/dts-v1/;
+
+#include "sm8350-oneplus-common.dtsi"
+
+/ {
+ compatible = "oneplus,lemonadep", "qcom,sm8350";
+ model = "OnePlus 9 Pro";
+};
+
+&mpss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rf_cable_ant0_active>;
+};
--
2.42.1
next prev parent reply other threads:[~2023-11-08 17:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-08 17:50 [PATCH v3 0/6] support oneplus-lemonade(p) devices Nia Espera
2023-11-08 17:50 ` [PATCH v3 1/6] dt-bindings: iio: adc: add smb139x Nia Espera
2023-11-09 9:24 ` Krzysztof Kozlowski
2023-12-04 14:24 ` Jonathan Cameron
2023-11-08 17:50 ` [PATCH v3 2/6] arm64: dts: qcom: sm8350: Fix DMA0 address Nia Espera
2023-11-08 17:50 ` [PATCH v3 3/6] arm64: dts: qcom: pm8350k: Remove hanging whitespace Nia Espera
2023-11-08 17:50 ` [PATCH v3 4/6] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type Nia Espera
2023-11-08 17:50 ` [PATCH v3 5/6] dt-bindings: arm: qcom: Add oneplus-lemonade(p) Nia Espera
2023-11-09 9:25 ` Krzysztof Kozlowski
2023-11-08 17:50 ` Nia Espera [this message]
2023-11-08 20:39 ` [PATCH v3 6/6] arm64: dts: qcom: sm8350-lemonade(p): New devices Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231108-nia-sm8350-for-upstream-v3-6-18a024b5c74c@igalia.com \
--to=nespera@igalia.com \
--cc=Me@orbit.sh \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=caleb.connolly@linaro.org \
--cc=clayton@igalia.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gpiccoli@igalia.com \
--cc=jic23@kernel.org \
--cc=keescook@chromium.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=luca.weiss@fairphone.com \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tony.luck@intel.com \
--cc=vkoul@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.