From: Daniel Palmer <daniel@0x0f.com>
To: gerg@linux-m68k.org, geert@linux-m68k.org, fthain@linux-m68k.org
Cc: linux-m68k@lists.linux-m68k.org, linux-kernel@vger.kernel.org,
Daniel Palmer <daniel@0x0f.com>
Subject: [PATCH v2 0/2] Fix 68000 interrupt stack frames
Date: Mon, 8 Jan 2024 18:32:19 +0900 [thread overview]
Message-ID: <20240108093221.1477020-1-daniel@0x0f.com> (raw)
While porting u-boot/linux to the QEMU M68K virt machine with configured
with a 68000 cpu (i.e. nommu..) I noticed that this has been broken for
a while.
I can't test this works on DragonBall right now as I need to get u-boot
working, put the UART driver back etc but this is working fine on QEMU
with some other WIP bits except for the issue that as soon as a process
exits the kernel panics that I'm debugging currently:
qemu-system-m68k \
-cpu m68000 \
-m 128 \
-M virt \
-kernel u-boot/u-boot.elf.fudged \
-nographic \
-drive file=fat:./bootfiles/,if=none,id=drive-dummy,readonly=on \
-device virtio-blk-device,drive=drive-dummy \
-drive format=raw,file=buildroot/output/images/rootfs.squashfs,if=none,id=drive-rootfs \
-device virtio-blk-device,drive=drive-rootfs \
-device virtio-serial-device \
-netdev user,id=net1 \
-device virtio-net-device,netdev=net1 \
-s
U-Boot 2024.01-rc6-00024-g90c9fa986604-dirty (Jan 08 2024 - 17:58:36 +0900)
DRAM: 128 MiB
Core: 134 devices, 6 uclasses, devicetree: embed
Warning: Device tree includes old 'u-boot,dm-' tags: please fix by 2023.07!
Loading Environment from nowhere... OK
In: uart@ff008000
Out: uart@ff008000
Err: uart@ff008000
Net: No ethernet found.
=> virtio scan; fatload virtio 1:1 0x3000000 vmlinux; setenv autostart yes; setenv bootargs console=ttyGF0 init=/bin/sh root=/dev/vda rootfstype=squashfs; bootelf 0x3000000
3669228 bytes read in 5 ms (699.8 MiB/s)
## Starting application at 0x00000400 ...
new fdt 07bf1810
[ 0.000000] Linux version 6.7.0-rc8-00188-gd9657c8bdd78 (daniel@shiro) (m68k-linux-gnu-gcc (Debian 13.2.0-7) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41.50.20231227) #38 Mon Jan 8 17:58:45 JST 2024
[ 0.000000] Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne
[ 0.000000] Generic DT Machine (C) 2024 Daniel Palmer <daniel@thingy.jp>
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffefff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Kernel command line: console=ttyGF0 init=/bin/sh root=/dev/vda rootfstype=squashfs
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] Memory: 126140K/131072K available (2571K kernel code, 299K rwdata, 604K rodata, 108K init, 106K bss, 4932K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=16, Order=0-1, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 126
[ 0.000000] irq_goldfish_pic: /soc/pic@0: Successfully registered.
[ 0.000000] irq_goldfish_pic: /soc/pic@1: Successfully registered.
[ 0.000000] irq_goldfish_pic: /soc/pic@2: Successfully registered.
[ 0.000000] irq_goldfish_pic: /soc/pic@3: Successfully registered.
[ 0.000000] irq_goldfish_pic: /soc/pic@4: Successfully registered.
[ 0.000000] irq_goldfish_pic: /soc/pic@5: Successfully registered.
[ 0.010000] Calibrating delay loop... 2046.36 BogoMIPS (lpj=10231808)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.080000] devtmpfs: initialized
[ 0.090000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.090000] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.100000] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.140000] NET: Registered PF_INET protocol family
[ 0.140000] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.140000] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.140000] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.150000] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.150000] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.150000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.150000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.150000] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.150000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.160000] printk: legacy console [ttyGF0] enabled
[ 0.170000] virtio_blk virtio2: 1/0/0 default/read/poll queues
[ 0.170000] virtio_blk virtio2: [vda] 936 512-byte logical blocks (479 kB/468 KiB)
[ 0.180000] virtio_blk virtio3: 1/0/0 default/read/poll queues
[ 0.180000] virtio_blk virtio3: [vdb] 1032192 512-byte logical blocks (528 MB/504 MiB)
[ 0.180000] vdb: vdb1
[ 0.190000] goldfish_rtc ff007000.rtc: registered as rtc0
[ 0.190000] goldfish_rtc ff007000.rtc: setting system clock to 2024-01-08T08:58:52 UTC (1704704332)
[ 0.190000] NET: Registered PF_INET6 protocol family
[ 0.190000] Segment Routing with IPv6
[ 0.190000] In-situ OAM (IOAM) with IPv6
[ 0.190000] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.210000] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 0.210000] devtmpfs: mounted
[ 0.210000] Freeing unused kernel image (initmem) memory: 108K
[ 0.210000] This architecture does not have kernel memory protection.
[ 0.210000] Run /bin/sh as init process
[ 0.250000] random: sh: uninitialized urandom read (4 bytes read)
~ # uname -a
[ 54.830000] random: uname: uninitialized urandom read (4 bytes read)
uClinux (none) 6.7.0-rc8-00188-gd9657c8bdd78 #38 Mon Jan 8 17:58:45 JST 2024 m68k GNU/Linux
[ 54.840000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
[ 54.840000] CPU: 0 PID: 1 Comm: sh Not tainted 6.7.0-rc8-00188-gd9657c8bdd78 #38
[ 54.840000] Stack from 0041bf20:
[ 54.840000] 0041bf20 002fd8d1 002fd8d1 0041fb00 00000001 0041bf40 0027e946 002fd8d1
[ 54.840000] 0041bf5c 0027b36e 0041fbc4 000000ff 00000000 00418000 00321ba4 0041bfa0
[ 54.840000] 0027bbee 002f6dbe 00000000 00000000 000000f7 0062e538 00000001 00000000
[ 54.840000] 00000000 00004c10 008255fe 00825272 008406da 008255fe 0041bf98 0041bf98
[ 54.840000] 0041bfb4 000057f8 00000000 00000000 0041a000 0041bfc4 0027bdf2 00000000
[ 54.840000] 002f6ef9 00891cb4 000019f8 00000000 00000000 000000f7 0062e538 00000001
[ 54.840000] Call Trace: [<0027e946>] dump_stack+0x10/0x16
[ 54.840000] [<0027b36e>] panic+0xc2/0x24c
[ 54.840000] [<0027bbee>] do_exit+0x4bc/0x684
[ 54.840000] [<00004c10>] get_current+0x0/0x16
[ 54.840000] [<000057f8>] do_group_exit+0x2a/0x6c
[ 54.840000] [<0027bdf2>] pr_cont_pool_info+0x0/0x62
[ 54.840000] [<000019f8>] system_call+0x48/0x4c
[ 54.840000] [<00200000>] tcp_seq_next+0x6e/0x90
[ 54.840000]
[ 54.840000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 ]---
Daniel Palmer (2):
m68k: Use macro to generate 68000 interrupt entry sleds
m68k: Fix interrupt stack frames for 68000
arch/m68k/68000/entry.S | 103 ++++++----------------------
arch/m68k/68000/ints.c | 30 ++++----
arch/m68k/include/asm/entry.h | 3 +
arch/m68k/include/uapi/asm/ptrace.h | 2 +-
4 files changed, 40 insertions(+), 98 deletions(-)
--
2.43.0
next reply other threads:[~2024-01-08 9:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-08 9:32 Daniel Palmer [this message]
2024-01-08 9:32 ` [PATCH v2 1/2] m68k: Use macro to generate 68000 interrupt entry sleds Daniel Palmer
2024-01-08 9:32 ` [PATCH v2 2/2] m68k: Fix interrupt stack frames for 68000 Daniel Palmer
2024-01-08 9:56 ` Geert Uytterhoeven
2024-01-08 10:17 ` Daniel Palmer
2024-01-09 14:09 ` Daniel Palmer
2024-01-09 14:27 ` Geert Uytterhoeven
2024-01-09 4:14 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240108093221.1477020-1-daniel@0x0f.com \
--to=daniel@0x0f.com \
--cc=fthain@linux-m68k.org \
--cc=geert@linux-m68k.org \
--cc=gerg@linux-m68k.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.