All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jan Kara <jack@suse.cz>
To: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: viro@zeniv.linux.org.uk, brauner@kernel.org, jack@suse.cz,
	akpm@linux-foundation.org, tj@kernel.org, xiujianfeng@huawei.com,
	linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mm@kvack.org
Subject: Re: [PATCH] writeback: move wb_wakeup_delayed defination to fs-writeback.c
Date: Fri, 19 Jan 2024 16:26:59 +0100	[thread overview]
Message-ID: <20240119152659.fvfk2axsd2pwhebk@quack3> (raw)
In-Reply-To: <20240118203339.764093-1-shikemeng@huaweicloud.com>

On Fri 19-01-24 04:33:39, Kemeng Shi wrote:
> The wb_wakeup_delayed is only used in fs-writeback.c. Move it to
> fs-writeback.c after defination of wb_wakeup and make it static.
> 
> Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>

Yeah, not sure why it was left there. Feel free to add:

Reviewed-by: Jan Kara <jack@suse.cz>

								Honza

> ---
>  fs/fs-writeback.c           | 25 +++++++++++++++++++++++++
>  include/linux/backing-dev.h |  1 -
>  mm/backing-dev.c            | 25 -------------------------
>  3 files changed, 25 insertions(+), 26 deletions(-)
> 
> diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
> index 1767493dffda..5ab1aaf805f7 100644
> --- a/fs/fs-writeback.c
> +++ b/fs/fs-writeback.c
> @@ -141,6 +141,31 @@ static void wb_wakeup(struct bdi_writeback *wb)
>  	spin_unlock_irq(&wb->work_lock);
>  }
>  
> +/*
> + * This function is used when the first inode for this wb is marked dirty. It
> + * wakes-up the corresponding bdi thread which should then take care of the
> + * periodic background write-out of dirty inodes. Since the write-out would
> + * starts only 'dirty_writeback_interval' centisecs from now anyway, we just
> + * set up a timer which wakes the bdi thread up later.
> + *
> + * Note, we wouldn't bother setting up the timer, but this function is on the
> + * fast-path (used by '__mark_inode_dirty()'), so we save few context switches
> + * by delaying the wake-up.
> + *
> + * We have to be careful not to postpone flush work if it is scheduled for
> + * earlier. Thus we use queue_delayed_work().
> + */
> +static void wb_wakeup_delayed(struct bdi_writeback *wb)
> +{
> +	unsigned long timeout;
> +
> +	timeout = msecs_to_jiffies(dirty_writeback_interval * 10);
> +	spin_lock_irq(&wb->work_lock);
> +	if (test_bit(WB_registered, &wb->state))
> +		queue_delayed_work(bdi_wq, &wb->dwork, timeout);
> +	spin_unlock_irq(&wb->work_lock);
> +}
> +
>  static void finish_writeback_work(struct bdi_writeback *wb,
>  				  struct wb_writeback_work *work)
>  {
> diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
> index 1a97277f99b1..8e7af9a03b41 100644
> --- a/include/linux/backing-dev.h
> +++ b/include/linux/backing-dev.h
> @@ -38,7 +38,6 @@ struct backing_dev_info *bdi_alloc(int node_id);
>  
>  void wb_start_background_writeback(struct bdi_writeback *wb);
>  void wb_workfn(struct work_struct *work);
> -void wb_wakeup_delayed(struct bdi_writeback *wb);
>  
>  void wb_wait_for_completion(struct wb_completion *done);
>  
> diff --git a/mm/backing-dev.c b/mm/backing-dev.c
> index 1e3447bccdb1..039dc74b505a 100644
> --- a/mm/backing-dev.c
> +++ b/mm/backing-dev.c
> @@ -372,31 +372,6 @@ static int __init default_bdi_init(void)
>  }
>  subsys_initcall(default_bdi_init);
>  
> -/*
> - * This function is used when the first inode for this wb is marked dirty. It
> - * wakes-up the corresponding bdi thread which should then take care of the
> - * periodic background write-out of dirty inodes. Since the write-out would
> - * starts only 'dirty_writeback_interval' centisecs from now anyway, we just
> - * set up a timer which wakes the bdi thread up later.
> - *
> - * Note, we wouldn't bother setting up the timer, but this function is on the
> - * fast-path (used by '__mark_inode_dirty()'), so we save few context switches
> - * by delaying the wake-up.
> - *
> - * We have to be careful not to postpone flush work if it is scheduled for
> - * earlier. Thus we use queue_delayed_work().
> - */
> -void wb_wakeup_delayed(struct bdi_writeback *wb)
> -{
> -	unsigned long timeout;
> -
> -	timeout = msecs_to_jiffies(dirty_writeback_interval * 10);
> -	spin_lock_irq(&wb->work_lock);
> -	if (test_bit(WB_registered, &wb->state))
> -		queue_delayed_work(bdi_wq, &wb->dwork, timeout);
> -	spin_unlock_irq(&wb->work_lock);
> -}
> -
>  static void wb_update_bandwidth_workfn(struct work_struct *work)
>  {
>  	struct bdi_writeback *wb = container_of(to_delayed_work(work),
> -- 
> 2.30.0
> 
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR

  parent reply	other threads:[~2024-01-19 15:27 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-18 20:33 [PATCH] writeback: move wb_wakeup_delayed defination to fs-writeback.c Kemeng Shi
2024-01-18 14:36 ` Christian Brauner
2024-01-19 15:26 ` Jan Kara [this message]
2024-01-22 10:57 ` Christian Brauner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240119152659.fvfk2axsd2pwhebk@quack3 \
    --to=jack@suse.cz \
    --cc=akpm@linux-foundation.org \
    --cc=brauner@kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=shikemeng@huaweicloud.com \
    --cc=tj@kernel.org \
    --cc=viro@zeniv.linux.org.uk \
    --cc=xiujianfeng@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.