[PATCH v2 3/4] ALSA: hda: cs35l41: Support HP models without _DSD using dual Speaker ID

From: Stefan Binding <sbinding@opensource.cirrus.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: <alsa-devel@alsa-project.org>, <linux-sound@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <patches@opensource.cirrus.com>,
	"Stefan Binding" <sbinding@opensource.cirrus.com>
Subject: [PATCH v2 3/4] ALSA: hda: cs35l41: Support HP models without _DSD using dual Speaker ID
Date: Fri, 26 Jan 2024 16:40:04 +0000	[thread overview]
Message-ID: <20240126164005.367021-4-sbinding@opensource.cirrus.com> (raw)
In-Reply-To: <20240126164005.367021-1-sbinding@opensource.cirrus.com>

Laptops 103C8C66, 103C8C67, 103C8C68, 103C8C6A use a dual speaker id
system where each speaker has its own speaker id.
The generic configuration table doesn't support this, so it needs its
own function.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
---
 sound/pci/hda/cs35l41_hda_property.c | 40 ++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index 6714740b85c8..5f8c214699d6 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -335,6 +335,42 @@ static int generic_dsd_config(struct cs35l41_hda *cs35l41, struct device *physde
 	return 0;
 }
 
+/*
+ * Systems 103C8C66, 103C8C67, 103C8C68, 103C8C6A use a dual speaker id system - each speaker has
+ * its own speaker id.
+ */
+static int hp_i2c_int_2amp_dual_spkid(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
+				      const char *hid)
+{
+	struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
+
+	/* If _DSD exists for this laptop, we cannot support it through here */
+	if (acpi_dev_has_props(cs35l41->dacpi))
+		return -ENOENT;
+
+	/* check I2C address to assign the index */
+	cs35l41->index = id == 0x40 ? 0 : 1;
+	cs35l41->channel_index = 0;
+	cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0, GPIOD_OUT_HIGH);
+	if (cs35l41->index == 0)
+		cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, 0, 0, 1);
+	else
+		cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, 0, 0, 2);
+	hw_cfg->spk_pos = cs35l41->index;
+	hw_cfg->gpio2.func = CS35L41_INTERRUPT;
+	hw_cfg->gpio2.valid = true;
+	hw_cfg->valid = true;
+
+	hw_cfg->bst_type = CS35L41_INT_BOOST;
+	hw_cfg->bst_ind = 1000;
+	hw_cfg->bst_ipk = 4100;
+	hw_cfg->bst_cap = 24;
+	hw_cfg->gpio1.func = CS35L41_NOT_USED;
+	hw_cfg->gpio1.valid = true;
+
+	return 0;
+}
+
 /*
  * Device CLSA010(0/1) doesn't have _DSD so a gpiod_get by the label reset won't work.
  * And devices created by serial-multi-instantiate don't have their device struct
@@ -414,6 +450,10 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
 	{ "CSC3551", "103C8C4F", generic_dsd_config },
 	{ "CSC3551", "103C8C50", generic_dsd_config },
 	{ "CSC3551", "103C8C51", generic_dsd_config },
+	{ "CSC3551", "103C8C66", hp_i2c_int_2amp_dual_spkid },
+	{ "CSC3551", "103C8C67", hp_i2c_int_2amp_dual_spkid },
+	{ "CSC3551", "103C8C68", hp_i2c_int_2amp_dual_spkid },
+	{ "CSC3551", "103C8C6A", hp_i2c_int_2amp_dual_spkid },
 	{ "CSC3551", "103C8CDD", generic_dsd_config },
 	{ "CSC3551", "103C8CDE", generic_dsd_config },
 	{ "CSC3551", "104312AF", generic_dsd_config },
-- 
2.34.1

