[PATCH 06/14] can: m_can: Add rx coalescing ethtool support - Markus Schneider-Pargmann

From: Markus Schneider-Pargmann <msp@baylibre.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
	Chandrasekar Ramakrishnan <rcsekar@samsung.com>,
	Wolfgang Grandegger <wg@grandegger.com>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Tony Lindgren <tony@atomide.com>, Judith Mendez <jm@ti.com>
Cc: Vincent MAILHOL <mailhol.vincent@wanadoo.fr>,
	Simon Horman <horms@kernel.org>,
	linux-can@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, Julien Panis <jpanis@baylibre.com>,
	Markus Schneider-Pargmann <msp@baylibre.com>
Subject: [PATCH 06/14] can: m_can: Add rx coalescing ethtool support
Date: Wed,  7 Feb 2024 10:32:12 +0100	[thread overview]
Message-ID: <20240207093220.2681425-7-msp@baylibre.com> (raw)
In-Reply-To: <20240207093220.2681425-1-msp@baylibre.com>

Add the possibility to set coalescing parameters with ethtool.

rx-frames-irq and rx-usecs-irq can only be set and unset together as the
implemented mechanism would not work otherwise. rx-frames-irq can't be
greater than the RX FIFO size.

Also all values can only be changed if the chip is not active.

Polling is excluded from irq coalescing support.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 drivers/net/can/m_can/m_can.c | 55 ++++++++++++++++++++++++++++++++++-
 1 file changed, 54 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 9b3e8e09f3aa..6dad1f569f82 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1977,7 +1977,57 @@ static const struct net_device_ops m_can_netdev_ops = {
 	.ndo_change_mtu = can_change_mtu,
 };
 
+static int m_can_get_coalesce(struct net_device *dev,
+			      struct ethtool_coalesce *ec,
+			      struct kernel_ethtool_coalesce *kec,
+			      struct netlink_ext_ack *ext_ack)
+{
+	struct m_can_classdev *cdev = netdev_priv(dev);
+
+	ec->rx_max_coalesced_frames_irq = cdev->rx_max_coalesced_frames_irq;
+	ec->rx_coalesce_usecs_irq = cdev->rx_coalesce_usecs_irq;
+
+	return 0;
+}
+
+static int m_can_set_coalesce(struct net_device *dev,
+			      struct ethtool_coalesce *ec,
+			      struct kernel_ethtool_coalesce *kec,
+			      struct netlink_ext_ack *ext_ack)
+{
+	struct m_can_classdev *cdev = netdev_priv(dev);
+
+	if (cdev->can.state != CAN_STATE_STOPPED) {
+		netdev_err(dev, "Device is in use, please shut it down first\n");
+		return -EBUSY;
+	}
+
+	if (ec->rx_max_coalesced_frames_irq > cdev->mcfg[MRAM_RXF0].num) {
+		netdev_err(dev, "rx-frames-irq %u greater than the RX FIFO %u\n",
+			   ec->rx_max_coalesced_frames_irq,
+			   cdev->mcfg[MRAM_RXF0].num);
+		return -EINVAL;
+	}
+	if ((ec->rx_max_coalesced_frames_irq == 0) != (ec->rx_coalesce_usecs_irq == 0)) {
+		netdev_err(dev, "rx-frames-irq and rx-usecs-irq can only be set together\n");
+		return -EINVAL;
+	}
+
+	cdev->rx_max_coalesced_frames_irq = ec->rx_max_coalesced_frames_irq;
+	cdev->rx_coalesce_usecs_irq = ec->rx_coalesce_usecs_irq;
+
+	return 0;
+}
+
 static const struct ethtool_ops m_can_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS_IRQ |
+		ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ,
+	.get_ts_info = ethtool_op_get_ts_info,
+	.get_coalesce = m_can_get_coalesce,
+	.set_coalesce = m_can_set_coalesce,
+};
+
+static const struct ethtool_ops m_can_ethtool_ops_polling = {
 	.get_ts_info = ethtool_op_get_ts_info,
 };
 
@@ -1985,7 +2035,10 @@ static int register_m_can_dev(struct net_device *dev)
 {
 	dev->flags |= IFF_ECHO;	/* we support local echo */
 	dev->netdev_ops = &m_can_netdev_ops;
-	dev->ethtool_ops = &m_can_ethtool_ops;
+	if (dev->irq)
+		dev->ethtool_ops = &m_can_ethtool_ops;
+	else
+		dev->ethtool_ops = &m_can_ethtool_ops_polling;
 
 	return register_candev(dev);
 }
-- 
2.43.0

