All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Berger <stefanb@linux.ibm.com>
To: keyrings@vger.kernel.org, linux-crypto@vger.kernel.org,
	herbert@gondor.apana.org.au, davem@davemloft.net
Cc: linux-kernel@vger.kernel.org, saulo.alessandre@tse.jus.br,
	Stefan Berger <stefanb@linux.ibm.com>
Subject: [PATCH v2 00/14]  Add support for NIST P521 to ecdsa and ecdh
Date: Thu, 15 Feb 2024 18:13:59 -0500	[thread overview]
Message-ID: <20240215231414.3857320-1-stefanb@linux.ibm.com> (raw)

This series of patches adds support for the NIST P521 curve to ecdsa and
ecdh. Test cases for NIST P521 are added to both modules.

An issue with the current code in ecdsa and ecdh is that it assumes that
input arrays providing key coordinates for example, are arrays of digits
(a 'digit' is a 'u64'). This works well for all currently supported
curves, such as NIST P192/256/384, but does not work for NIST P521 where
coordinates are 8 digits + 2 bytes long. So some of the changes deal with
converting byte arrays to digits and digits to byte arrays.


Regards,
   Stefan

v2:
 - Reformulated some patch descriptions
 - Fixed issue detected by krobot
 - Some other small changes to the code

Stefan Berger (14):
  crypto: ecdsa - Convert byte arrays with key coordinates to digits
  crypto: ecdsa - Adjust tests on length of key parameters
  crypto: ecdsa - Extend res.x mod n calculation for NIST P521
  crypto: ecc - Implement vli_mmod_fast_521 for NIST p521
  crypto: ecc - For NIST P521 use vli_num_bits to get number of bits
  crypto: ecc - Add NIST P521 curve parameters
  crypto: ecdsa - Register NIST P521 and extend test suite
  x509: Add OID for NIST P521 and extend parser for it
  crypto: ecdh - Use properly formatted digits to check for valid key
  crypto: ecc - Implement ecc_digits_to_bytes to convert digits to byte
    array
  crypto: Add nbits field to ecc_curve structure
  crypto: ecc - Implement and use ecc_curve_get_nbytes to get curve's
    nbytes
  crypto: ecdh - Use functions to copy digits from and to byte array
  crypto: ecdh - Add support for NIST P521 and add test case

 crypto/asymmetric_keys/x509_cert_parser.c |   3 +
 crypto/ecc.c                              |  71 +++++--
 crypto/ecc_curve_defs.h                   |  45 +++++
 crypto/ecdh.c                             |  59 +++++-
 crypto/ecdsa.c                            |  48 ++++-
 crypto/testmgr.c                          |  14 ++
 crypto/testmgr.h                          | 225 ++++++++++++++++++++++
 include/crypto/ecc_curve.h                |   3 +
 include/crypto/ecdh.h                     |   1 +
 include/crypto/internal/ecc.h             |  61 +++++-
 include/linux/oid_registry.h              |   1 +
 11 files changed, 495 insertions(+), 36 deletions(-)

-- 
2.43.0


             reply	other threads:[~2024-02-15 23:14 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-15 23:13 Stefan Berger [this message]
2024-02-15 23:14 ` [PATCH v2 01/14] crypto: ecdsa - Convert byte arrays with key coordinates to digits Stefan Berger
2024-02-15 23:14 ` [PATCH v2 02/14] crypto: ecdsa - Adjust tests on length of key parameters Stefan Berger
2024-02-15 23:14 ` [PATCH v2 03/14] crypto: ecdsa - Extend res.x mod n calculation for NIST P521 Stefan Berger
2024-02-15 23:14 ` [PATCH v2 04/14] crypto: ecc - Implement vli_mmod_fast_521 for NIST p521 Stefan Berger
2024-02-15 23:14 ` [PATCH v2 05/14] crypto: ecc - For NIST P521 use vli_num_bits to get number of bits Stefan Berger
2024-02-15 23:14 ` [PATCH v2 06/14] crypto: ecc - Add NIST P521 curve parameters Stefan Berger
2024-02-16 18:48   ` Elliott, Robert (Servers)
2024-02-16 19:03     ` Stefan Berger
2024-02-15 23:14 ` [PATCH v2 07/14] crypto: ecdsa - Register NIST P521 and extend test suite Stefan Berger
2024-02-15 23:14 ` [PATCH v2 08/14] x509: Add OID for NIST P521 and extend parser for it Stefan Berger
2024-02-15 23:14 ` [PATCH v2 09/14] crypto: ecdh - Use properly formatted digits to check for valid key Stefan Berger
2024-02-15 23:14 ` [PATCH v2 10/14] crypto: ecc - Implement ecc_digits_to_bytes to convert digits to byte array Stefan Berger
2024-02-15 23:14 ` [PATCH v2 11/14] crypto: Add nbits field to ecc_curve structure Stefan Berger
2024-02-15 23:14 ` [PATCH v2 12/14] crypto: ecc - Implement and use ecc_curve_get_nbytes to get curve's nbytes Stefan Berger
2024-02-15 23:14 ` [PATCH v2 13/14] crypto: ecdh - Use functions to copy digits from and to byte array Stefan Berger
2024-02-15 23:14 ` [PATCH v2 14/14] crypto: ecdh - Add support for NIST P521 and add test case Stefan Berger
2024-02-16 19:27 ` [PATCH v2 00/14] Add support for NIST P521 to ecdsa and ecdh Simo Sorce
2024-02-16 19:32   ` Stefan Berger
2024-02-16 19:40     ` Simo Sorce
2024-02-19 14:40       ` Stefan Berger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240215231414.3857320-1-stefanb@linux.ibm.com \
    --to=stefanb@linux.ibm.com \
    --cc=davem@davemloft.net \
    --cc=herbert@gondor.apana.org.au \
    --cc=keyrings@vger.kernel.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=saulo.alessandre@tse.jus.br \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.